Counting matching models…
The tea dispenser can be mounted on top or stacked on a table (version I.). Held in place under the shelf with 2 wood screws 4,0x16 mm, the length depends on the thickness of the shelf. Update 5.4.2022 - New box - version II. Mountable…
This is a fun and challenging balance Tetris game. The game is simple to play: simply print as many sets of pieces as you need (I printed 1 set per player, but 2 sets work great). Every palyer get one pieces of each type. The first player…
This is a bowl in the shape egg with bunny ears. Perfect for holding candies or decorative eggs and with beautiful decor to your Easter decorations. Printing instructions: filament PLA 0,2 mm layer height with supports (only in places…
Prints without support, just scale to the desired size in slicer. By default the flower pot has a height of 160mm and a maximum (outer) diameter of around 177mm. As seen in photos I also printed a small (~100mm heigh and 112mm diameter)…
I needed a sponge holder for the sink. You need to print 2 parts and then connect them. it goes on tight but holds strong. Printing instructions: the hook printed on the edge with the big surface perpendicular to the print surface…
Make perfect corner profiles with any router using the Corner Routing Set. First, select corner jig and attach to the holder JIG. Next, attach it to the edge of material, that you want to machine. Finally, rout and you'll get perfect…
I remixed hex bit storage box with place for hand screwdriver. I used hex H6 bit for screwdriver holder into box. The hex bit is only pushed to the center of the box. It will hold the screwdriver. My inspiration is hier: Hex Bit Storage…
I designed an angle grinder holder Ø 125 mm for the wall. We will use M4x20 screws for connecting. The disc holder and middle holder are mounted on the back part. The cable holders are mounted on the right part. The JIG holder is…
Prints without support. By default the flower pot has a height of 160mm and a maximum (outer) diameter of around 133mm. As seen in photos I printed in dimension 1:1. Please note, that it is not designed to be printed in vase mode. If you…
I designed “Spice rack”. The base of rack is 60x200 mm and the height is 150 mm. The rail for spice rack has base 63x260 mm. The rack is pull out and can be rotated 90 °, so there is easy access to the spices. The base is attached to the…
I designed a wrench holder for the wall. We connect the wall holder with the wrench holder. We will use M4x25 screws for connecting. The counter piece of the holder is installed on the wall using 4x30 wood screws, which you can find here:…
I remixed “Small Parts Assortment System”. I updated the base from 45x45 mm to 60x60 mm and the height is updated on two dimensions 40 and 78 mm. The wall thickness is 1,5 mm, so the boxes can be stacked. The handle can hold a 12 mm…
I designed a pliers holder for the wall. We connect the wall holder with the screwdrivers holder. We will use M4x20 screws and M4 nuts for connecting. The counter piece of the holder is installed on the wall using 4x30 wood screws, which…
I designed new version of sponge holder with box for water on the kitchen counter. You need to print 2 parts and then connect them. Printing instructions: filament PLA 0,2 mm layer height without supports infill 30%
This is holder with box for Wago 221 for my home made CNC. This holder is to 4 pcs wago 221. The holder is fixed with two wood screws 3,5x10 into the wood and the cables are fixed with plastic cable tie. Box is closed with two srews M3x10…
I present to you my Easter train. I like this train very much. So let's start printing. First the print details: Egg 1 - first change color row 12,2 mm or layer 61 - second change color row 24,4 mm or layer 122 - third change color row…
I designed advent calendar how old truck. Assembly instructions: 1 - Join the two parts (chassis 1-2 and chassis 2-2) together with a rubber hammer. It's hard going, but it holds without glue. 2 - If you printed without supports, they are…
I designed various christmas trees for mounting led lights. I used led lights with a length of 5m with 50 led lights. First connect the bottom stand with the tree and then start pulling the led lights from the bottom through the bottom…
I prepare board holder for storage tools. I focused primarily on electric instruments. The first part is installed on the wall with woodscrews 4x30. The second part is installed to the tool holder with screw M4x25 and nut M4. The third…
I updated original Numicon Shapes. We dont need base board. The parts are stack on top of each other. Numicon Shapes are so clever and very helpful in teach mathematic! They are incredibly versatile, and they help children see numbers as…
Christmas wall decoration Snowman. Fast and easy print. Use 2 color.
I designed a Bessey clamp holder for the wall. The wall holder is attached to the clamp bessey holder using M4x20 screws and M4 nuts. The counter piece of the holder is installed on the wall using 4x30 screws, which you can find here:…
I designed a shelf for the kitchen cabinet. The shelf is modular and can be joined and expanded. I assembled the shelf with 4pcs - 3,5x16 mm wood screws.
I designed a hammers holder for the wall. We connect the wall holder with the hammers holder. We will use M4x40 screws for connecting. The counter piece of the holder is installed on the wall using 4x30 wood screws, which you can find…
Gomoku, also known as Five in a Row, is a classic board game that originated in China and is now enjoyed worldwide. The objective of the game is to be the first player to align five of their markers in a row, either horizontally,…
This is a clean/dirty indicator for the dish washer. The indicator will cover the START button. The 3 parts assembled together and stick to the dishwasher with Double-sided tape. The cover is printed on the edge with support. Other parts…
I did not like the attachment of the wicker basket to the bicycle, so I made my own holder. Holder I, II and III are connected together with screw M4x40 (4 pieces) and with M4 nut (4 pieces). Printing instructions: filament PLA 0,2 mm…
I kept tripping over the personal scale in the bathroom. It was stored under the sink cabinet on the floor. So I designed a weight holder to be mounted under the sink cabinet with wood screw 3,5x18 mm. Printing instructions: filament…
I created a mandala egg as a decoration for a door or wall. It is challenging to change filaments up to 26 times. On the picture is: Orange Yellow Sky blue Luminous Green Pearl Red White Pearl Red Orange Yellow Pink Red Purple Bright Pink…
These are all currently available results.
