Counting matching models…
TL;DR: Model B “Recommended” is the most aesthetically pleasing, Model C “Minimalist” is the smallest and fastest to print and will fit better in a pouch/case/bag. The purple one on the main picture is Model B, the light blue one is Model…
Surrogate Nintendo Wii U Vertical Stands. 2 models, one can accommodate optional 6mm rubber feet (see pictures) If you enjoy or find this model useful please make sure to click the Like button. Thank you! Layer height: 0.3mm Infill: 15%…
About this model: Simple stand for the ROG Ally inspired by the one I did for the Steam Deck I tried to make this one a bit more “angular” to fit the general design of the ROG Ally. 2 Variants: One with a flat bottom and one that can…
Print the two parts and join them together with a bite of glue or double sided tape. Layer Height: 0.3mm Infill: 20% for the hook part, 15% for the headset stand. Support: On build plate for Part A. None for the part B (See pictures) If…
Very simple Nintendo Switch game carts holder. 2 size, 6 or 12 carts. Layer height: 0.3mm Infill: 20% Support: None Check my other version that fits in a Switch Game Case. If you enjoy or find this model useful please make sure to click…
The Voron V0 sure is small but it is still a bit of a pain to carry and move around. Here're some minimalist handles which do not require any new nuts to be installed nor anything to be taken apart. They've been designed to work with…
Skadis USB Cables Hanger Print 4 of the Hooks, add a dab of glue in the Cables Hanger slots and slide them in. Layer Height: 0.3mm Infill: 15% Support: On build plate for the Cables Hanger. None for the Hooks. If you enjoy or find this…
My attempt at a battery cover for my Mario Bros Game & Watch. Nozzle: 0.4mm Layer height: 0.2mm Infill: 15% Support: On build plate Material: Tested with PLA. If you enjoy or find this model useful please make sure to click the Like…
Extend the box of your Wowstick electric screwdriver to fit the 3 tips tubes and the Wowstick itself. Need 8pce 5x1.5mm magnets https://www.aliexpress.com/item/1005002669769662.html Update: New version for 5x2mm magnets added. Need: Super…
My take on an iPad Air stand. Need: 6x 12mm Rubber Feet Nozzle: 0.4mm Layer height: 0.2mm Infill: 20% Support: None If you enjoy or find this model useful please make sure to click the Like button. Thank you! Be sure to check my other…
Simple Terminals Cover for the V0/V0.1 Mean Well LRS-100-24 or LRS-150-24 PSU. STEP file provided if you'd like to tweak it. Below the requirements and settings, settings are from the Voron Manual, a bit overkill for this but at least you…
Variation of my simple Nintendo Switch game carts holder that clips into the cart slot and securely fits in the game case. Hold 10 game carts. If you enjoy or find this model useful please make sure to click the Like button. Thank you!…
My attempt at a battery cover for my Oil Panic Game & Watch. Nozzle: 0.4mm Layer height: 0.2mm Infill: 15% Support: On build plate Material: Tested with PLA. If you enjoy or find this model useful please make sure to click the Like…
Description A 9cm (3.54 inches) diameter coaster inspired by the Skull logo of Helldivers II If you enjoy this model please leave a Like or post a Make , also be sure to check my other models . Thank you! About the model: This is a…
Another version of my iPad Air Stand [ https://www.prusaprinters.org/prints/104638-ipad-air-stand ] This one is smaller (~113x106mm) and can be printed on a small printer like a Voron V0. The brackets have also been redesigned to have way…
Simple hook to hang headphones on the side of your PS5. Designed for a friend, pictures are from his set up. Layer Height: 0.2mm Use 4 or 5 Perimeters resulting in no infill. This is designed for a headphones with a large strap width…
Holder for 8 Compact Flash Cards Nozzle: 0.4mm Layer height: 0.2mm Infill: 15% Support: None Use a brim if you don't have strong enough adhesion on the print bed. If you enjoy or find this model useful please make sure to click the Like…
Description A 9cm (3.54 inches) diameter coaster from the Starfield Constellation Logo. If you enjoy or find this model useful this model please leave a Like or post a Make , also be sure to check my other models . Thank you! About the…
Half a spool to combine with half of a Prusament spool to hold your filament samples. Nozzle: 0.4mm Layer height: 0.3mm Infill: 15% Support: None If you enjoy or find this model useful please make sure to click the Like button. Thank you!…
Xbox Controller Holder for HSW, no tool required (read below). This is by no mean an original model, I did it by taking LayerCake's great Xbox Stand fro SKADIS and making it compatible with the great RostaP's Honeycomb storage wall. No…
Yet another tiny pot and saucer for your small plants or herbs! Nozzle: 0.4mm Layer height: 0.3 mm Infill: 15% Support: None If you enjoy or find this model useful please make sure to click the Like button. Thank you! Be sure to check my…
Description I designed this cover to mainly protect the screen and to be as thin as possible. I did want the RGX35XX to still be very pocketable. About this model: The black and red on the pictures has the first 3 layers made of PETG as…
Description A simple stand to accommodate the horizontal storage of Soda Stream Duo bottles, perfect to store them in your fridge! Designing for the glass bottle but works fine for the plastic one as well. Tips : Add some rubber feet to…
Print in a clear material. Add a 5mm LED and connect it to your Raspberry TX line as per those instructions . Should friction fit. A dab of glue might help. STEP file provided if you'd like to tweak it. Layer height: 0.2mm Infill: Left as…
Button with the Swiss Cross. Diameter is ~15.2mm. Layer height: 0.15mm Infill: 15% Support: None If you slice it yourself, set a colour change at 3.35mm height STEP and Fusion 360 files provided. If you enjoy or find this model useful…
5mm hole Shelf tabs. Nozzle: 0.4mm Layer height: 0.3mm Infill: 15% Support: None If you enjoy or find this model useful please make sure to click the Like button. Thank you! Be sure to check my other models .
Description Replacements for two types of buttons on the NES Advantage joystick. One button for the toggle switch (i.e. Turbo and Slow buttons) and one for the Start and Select push switches. If you enjoy or find this model useful this…
Slide in stands for the Asus ZenScreen MB16 Monitor. Modeled for and tested on MB16AC but I bet they work for MB16ACR and MB16ACM. There's 2 model on more "upright" and one more "inclined" and for each there're models that take 10mm…
Didn't find any model of the Virtual Boy male connector (console side) online so I've designed my own for use in a USB adapter for the Virtual Boy controller. Need 6x 1.36mm Pogo Pins…
Since Displate sticker magnet attachments don't stick to plastered wall, I made this small part to stick the magnet to and fix to the wall with 4 small nails. How to use: Print the model Stick the magnet Nail the part to the wall Place…
2x 123 Blocks Gridfinity Holder, nothin much to add to this but you can always look at pictures! 0.3mm layer height works fine, got for 0.2mm if you want it smoother. No support If you like this be sure to check my other models . Thanks…
This is a box to protect a 40x20 magnet or to be protected from it! The magnetic field will still be effective through the case but way less strong, removing a bit of danger of handling this bad boy around! If you enjoy or find this model…
Hold your Logitech G502 X on your HSW! You'll need 4 6x2.1mm magnets (same ones used in Gridfinity). There are 2 models. One to hold the mouse up (or down) and one to hold it sideways both of them with and without the G logo. Slicing &…
Skadis adapter for Migros topline box Print 2 hooks, add a dab of glue in the slots and slide them in. Layer Height: 0.3mm Infill: 15% Support: None If you enjoy or find this model useful please make sure to click the Like. Thank you! Be…
I upgraded from my Wow Stick box extender to this designed Gridfinity one. Designed with magnet holder if that's your thing. No support 0.3mm works, 0.2 if you want better finish Printed in PLA, I guess anything is fine! If you like this…
These are all currently available results.
