RG35XX TPU Front Cover/Protector Case
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Thin front cover case for the RG35XX to mainly protect the screen
- Rating
- 0 / 5
- Likes
- 12
- Downloads
- 82
- Makes
- 0
- Views
- 1,541
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Video Games
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Description
I designed this cover to mainly protect the screen and to be as thin as possible. I did want the RGX35XX to still be very pocketable.
About this model:
The black and red on the pictures has the first 3 layers made of PETG as it bonds well with the TPU. You can follow this post if you'd like to achieve the same result with a single extruder / no MMU.
Otherwise it's easy to just print the whole thing in TPU like the white one in the pictures, the front 4 layers are plenty strong and protect the screen well.
If you enjoy or find this model useful this model please leave a Like or post a Make, also be sure to check my other models. Thank you!
Model is provided as a 3MF file with my settings, you may want to adapt.
Settings
Layer Height: 0.3mm
Infill: Honeycomb at 15%
Support: None.
Bottom layers: 4
Top layer: 0
Single Material: TPU highly recommended. I used PolyMaker PolyFlex TPU95
Multi Materials: PETG for first layers + TPU (TPU doesn't bond to PLA). See this post on how to do multimaterial with a single extruder / no MMU.
Note: I might design a back half is there's a demand for it (likely TPU, single material. With or without ports/buttons access)
If you like theses or some of my other models consider supporting me by joining my club.
You can also get a commercial license if you'd like to sell prints of this model by joining this tier.