Counting matching models…
2026.01.13 - Moved github links to codeberg. 2024.01.17 - Adafruit has a replacement for the main arduino board now. No code changes will be required, as the only change is to the accelerometer. The codeberg code doesn't use the…
2023.07.20: added components list. 2023.06.28: adjusted eject/reset/open buttons to more easily fit in their spots and play better with their surroundings. Corrected fit for entire shell with controller ports, modified bottom shell to…
Demo video: https://peertube.art3mis.de/w/xk4FYHjtFn7LpKPURgXS5J This is going to be a challenging build. Your best chance for success will require some experience with model building and hobby electronics assembly / soldering. For this,…
Update 2022.10.11: Working on another screen frame to use one of these hdmi panel mounts: https://smile.amazon.com/gp/product/B09D924KLN https://smile.amazon.com/gp/product/B093WD6NB7 -This should enable a lot more flexibility in the…
Update 2023.12.07 - added scaled down version for mini sized pin version. This won't work for the “live” version of the fansets lower decks badge. That one has a different magnet orientation. Created this to enhance the fansets lower…
Tentative note 2022.04.25: This will get revised at some point, as main sound board will be changed to an adafruit qtpy with a battery backpack and a mono amp board. This will minimize soldering required, and give potential for some kind…
Last Update 2025.03.03 - Revised monitor frame (without tray) to better fit the pi zero's sd card slot. Flared that cutout to make card easier to remove with fingers. This is in prep for a v2 of this model coming soon. THIS PROJECT IS…
Got frustrated with how tiny the magnet attachment point is for the average golf hat ball marker clip. This has a spot for a 12x3mm size magnet to be glued to the underside. I designed this to fit the thickness of a 39 thirty new era hat…
There are a few components to this, along with a couple custom PCBs for usb cable minification. All usb is 2.0 on this build. The power / battery pisugar board has been HEAVILY modified to keep the build as slim as possible. I removed the…
This is probably the most American concept ever, but the knee rover scooter charges extra for a large basket. I was looking for something with a much smaller profile. There are 2 versions of this model- one with a front and back section,…
Edge of stand is meant to look similar to ps2 front rails. Freecad file is included, and fit is confirmed when printing at 0.2mm height. Print with widest section touching your build plate. Print in pic is using Mika3D gold silk PLA at…
Last updated 2025.05.01: 12x12mm button works better for the circuit board, and main button cap presses into it more smoothly. 90 degree micro usb plug makes assembly easier, and monitor sits better on base as a result. This v2 has some…
Wanted to hang eaglemoss models from the ceiling of a metal cabinet to save shelf space. This should fit the 5" enterprise D or enterprise C models they make. Highly recommend hanging these by sliding them onto the back of the saucer…
This has only been tested with the master replicas small version of the U.S.S. Titan. This is a 2 piece bracket meant to allow the clear section of the ship stand to be attached to the underside of a metal shelf with magnets. Cutouts are…
This hyperpixel cyberdeck uses a few parts I had sitting around. There are a few components to this, along with a couple custom PCBs for usb cable minification. All usb is 2.0 on this build. The power / battery pisugar board has been…
I printed this in 95A TPU. This really requires some sort of flex, so use something that has some give. Do NOT bother to print this with PLA - clip prongs WILL snap off on install attempt. The great part of 3d printing is that you can use…
I created this because they don't really make this part anymore, and even if they did, the only designs they have for it are really ugly. I wanted a center cap that sat flush across the axel hole. This fits 16" wheels for sure, but may…
Added cone to the top of the threaded section to enable printing without need for supports. I have printed this out in TPU and it does fit my own car. There are 2 lengths here. The make shown is of the 95mm version. Make image is a 2007…
Print shown has black for the base section, yellow for the inner “face”, and white for each inner eye. This was a bit sloppily designed - you may need to sand down the outer and inner edges of the eyes and inner face sections so they fit…
2025.11.05 - added cob light model as separate step / stl for reference I created this for my own use case - should allow attachment of cob light to alpaka bag strap. Light should sit much flatter than just using its built-in clip alone.…
The original shell for my particular psx game code thing seemed to purposely strain when fitting the front to the back. If I were inclined, I'd completely redesign this using the inner board only instead of the original shell as…
While working on a v2 of the arduino tricorder, I figured it'd be good to have a holster for it when it's complete. Dimensions of the v2 are going to be the same as v1. This expects an 80mm x 40mm tricorder, with the door facing outward.…
These are clips meant to fit in a baseball cap, to allow a face mask to be easily attached without straining your ears. I made these after being disappointed with what I got from…
Print shown used filamentum nonoilen filament, as that's supposed to be food safe. I will likely have this printed in aluminum or stainless steel for long term use. The whole point of this was to not have to buy comandante jars that don't…
I printed this at 0.2mm in sainsmart black tpu. I just wanted this to look more like the lower decks badge if I was going to wear it. Keep in mind this won't snap into place - you'll probably want to use double sided tape on the inside or…
Originally I had a perch that fit on top of this, but the cat never used that. This gives the top some more utility. This is meant to fit onto the corner of the cat scratching post, to attach a stringed toy. There are 3 total parts: left…
I have been looking for a simple radio to build with a circuitpython board, and wanted a reason to use these great LED matrices from pimoroni . This uses their pico with battery support and has its own power button. You can recharge the…
I designed this because I didn't want to have to grab the bottom of the plunger base every time I had to move it to the other toilet. This was meant to be a full base with cutouts, but the single beam for the bottom has worked well…
This was created as a reference for the 80s cassette case that was likely used as the base for the star trek next generation / voyager briefcase. This was meant to replicate the original case dimensions as accurately as possible, to serve…
Created this attachment to convert Funko Janeway's phaser to a coffee mug. Included freecad source file, and 2 versions of mug. 1 version is just 1 solid part, the other is 2 pieces: 1 mug and 1 coffee top to be printed in brown. Print in…
This is an extremely hacked together shell for a keyboard with an integrated monitor. Top section has small indents for usb c / usb a storage Parts used: nuphy node75 low profile keyboard (internals extracted) waveshare 6.25" hdmi screen…
Got one of these a little while ago, hated the giant tube it came with for storage. Printed this in TPU to keep it together. https://www.target.com/p/nerf-action-sports-toy-hockey-set-3pc/-/A-88015187 FreeCAD file included in case anyone…
Basic stand for gillette labs and mach 3 razors. Example is printed in TPU, but this should work with PLA if desired. Included freecad file in case remixes are attempted.
2026.05.28 - added inset version with separate letter STLs to allow printing in alternate color filament for cleaner labeling. No spacing in letter models themselves - I printed these with a negative horizontal expansion value in cura so…
I designed this because the 4allfamily refrigeration thermos "voyager" is basically unusable as it is sold. The sleeve is meant to keep 10ml vials from rattling around inside the metal thermos, and has a single clip that can hold a single…
These are all currently available results.
