Counting matching models…
Update 12/18/23: I have found that using a square of shelf gripper, liner, foam under the cutter prevents the base from rotating. See third photo. Press firmly on the spindle with one hand while rotating the blades with the other. Cut two…
If you are willing to take more time and really dial in your Z heights, please check out my new DETAILED first layer calibration for Revo Six (or any 0.25, 0.4, 0.6, 0.8mm) nozzles . If you simply want a fast way to set or confirm your Z…
If you simply want a fast way to set or confirm your Z heights, try my QUICK first layer calibration for Revo Six (or any 0.25, 0.4, 0.6, 0.8mm) nozzles . Use these DETAILED files if you are willing to take more time and really dial in…
This is a holder for the Ketch Karbonate (specifically plastic 26" model ) fishing ruler that attaches to standard kayak accessory tracks (specifically for my Native Watercraft Slayer Propel 10 ). Disclaimers: I cannot guarantee that the…
09/17/22 update: If the wingnut continues to loosen when the spool spins, you can rotate the base 180% and flip the fishing line spool 180%. Or you can add an extra jam nut before screwing on the wing nut. After overpaying for 200yd…
This is an 80mm sizing and remix of joaolsneto 's EIBOS Series X: Easdry - Upgrades - Fusion 360 Parametric model . The original modeling of the EIBOS dryer and design of the extension components is a near work of art, but it requires a…
I created this model so my daughter could store and display her 30+ decks of playing cards. Each holder shelf holds 10 standard-size decks. By my estimation, you can fit at least 8 holders / 80 decks on the 22x22" IKEA Skadis and 4…
March 17 update : I've uploaded a reworked base design that I think is more aesthetically pleasing. See the first two photos in the image carousel. You can now build a holder to your preferences: more appealing Mark 2 base original Mark 1…
This is a simple design that can print without any supports. The resulting tapered cylinder should fit into the secondary drink holder that slides under the open armrest of a 2009-2015 Prius (I specifically drive the 2011). At minimum you…
[PREFACE: The photographed shelf holder is wider than the uploaded model. The uploaded model matches the manufacturer's specs and has 2 fewer columns of hexes. I widened my Series X to fit wider spools so my shelf is also wider.] I…
I added a Negative Volume cylinder in PrusaSlicer to create the notch. The model preview will look odd, but it's there. The original model is otherwise unchanged. I also printed with different PrusaSlicer settings from the original —…
After browsing dozens and printing several shaving stands, I still couldn't find one that met my needs. In the end, I designed this short, thin-walled, and fairly elegant stand to hold my (short-handled) Merkur 34C razor and a (standard…
The Wilderness Krate fishing crate allows for 6 rod holders, but you have to lower the middle two or cut off the center tie-downs. With this spacer, you can have the height and an unblemished Krate. In addition to the 4 spacers, you will…
This design snap fits to the ice cube bin inside the freezer drawer of the LG model #LFXS26596S refrigerator. I don't know if other LG models share the same bin and configuration. Print settings: I printed with PETG; I suspect PLA would…
I printed with PETG at 0.15mm layer height. I used 100% infill and turned on “bobstro's supports," which are saved in the .3mf file. The tall end of the axle attaches to the large plastic gear with a screw. The other shorter end rests…
UPDATE (06/12/22): I remixed the dial to allow for more flow and (hopefully) less clogging. I printed it with a 0.25 nozzle, but it should be fine with a 0.4. With the 0.25 nozzle, I printed with 15% rectilinear infill and slightly…
The Mighty Max Cart is a sturdy dolly to move heavy things, but the Cargo End Walls are poorly designed. When used without a tub holding the four corners in place, the bungeed end pieces pull inward and eventually pop off. I designed a…
The plastic spacer that attaches the handle to the glass lid broke on my DeLonghi DCP707 slow cooker . I designed a new one and printed it with colorFabb HT (a high-temp PETG rated to 100*C). The print would also work with ASA, ABS or PC…
These are all currently available results.
