Counting matching models…
You can use glue, or small piece of fiber to fix the Gearbox to the Reel. Don't use glue on the Holder! The Reel has an opening for fibre. The whole winch is easy to assemble/dissasemble to the Jeep, as it has already the mount for the…
Good morning, and welcome to the Black Mesa Transit System! Do you remember the time Gordon Freeman making his friends in the Half-Life Series ? I'll bet yes! However, we are all getting older, the first Half-Life was published back in…
Our original bridge has broken leg. I was looking for replacement, found it here and liked the design. I have only made the bow higher to be able to pass the trains under the bridge. You can make your own bridge by screwing 2 printed…
Mine is created from Nylon, but any other material should work too. Dimensions: 110x70mm Happy mowing!
To make it easier to print it, I made the pegs for Skadis separately. You need to print pegs 3x Print Parameters: Resolution: 0.2 Infill: 20% Perimeters: 3-4 Rafts: No Supports: No Material: PETG/Any
Just a replacement of something like: Can be seen on UNC 060, 061 or 750 made in ZTS Zvolen, Slovakia. Will work on other Hydraulic couplings. You can attach the lace to hold the cover on hose. My Print Parameters: Resolution: 0.20…
My own 3D modelled house in CATIA v5 and sliced with Prusa Slicer for i3 MK3S+. Please post the results, if you will print it out. Thanks :)
Perimeters: 5 Printing upside down No supports needed
Print parameters: Perimeters: 15 Top Layers: 0 Bottom Layer: 0 Fill Pattern: Honeycomb Fill Density: 15% Layer Change: Layer 9 / 1.8mm Material: PETG Recommended - dishwasher and hot drinks friendly, food safe Prusament PETG Prusa Orange…
Modification of Base Towers for Filament Drybox Ikea Samla 22L from pixelwave. Printed out already 4 Boxes and I am very happy about them! Just rised feet to fit bigger Silicagel Boxes or Drybags under the spools. Mine are Hysure 400 and…
My Print Parameters: Resolution: 0.3 Nozzle: 0.6 Seam position: Aligned Infill: 20% Perimeters: 2 Rafts: No Supports: No Material: PETG Prusament Galaxy Silver You can speed up the print even, I printed on 150% without issues. Happy…
My Print Parameters: Resolution: 0.15 Seam position: Random Infill: any Perimeters: 2 Rafts: No Supports: No Material: Flex 30D, or weaker
Works with: Maxtrax board from daver18qc . Note: The board is 1/8 (not 1/10 as described), don't resize it! Mount it on the: roof rack with 4mm diameter (print part A+B) sideways on the car body just drill the holes on the body of the car…
The end of the aluminium needs to be filed to fit the Front Axle Housing. The Servo Arms needs to be 3mm shorter to correct the wheels angles. All files included. Resolution: 0.15 Infill: 100% Infill type: Rectilinear Perimeters: 7 Rafts:…
No supports needed Infill irrelevant Resolution: 0.15 Printed from PETG Scaled to 105% to compensate shrinking
Use proper settings to have Center of Gravity in the Dice center or use my 3mf files. Print Parameters: Resolution: 0.2 Infill: 20% Infill type: Gyroid (equal in all directions) Perimeters: 4 Minimum shell thickness: T:1.67mm B:1.67mm…
I realised that the printed ball joints for my Bamboo Toyota FJ40 are too big. However, I have installed them all. Now I need to remove them and install a smaller - scaled ones. This is the tool to uninstall them with vice or hammer. No…
Blank stencil for custom text! You can use PrusaSlicer 2.6.0 feature to add your own text - I was missing the blank stencil, I created it to match with stencils I have already printed. Just edit the text, which have I already added. Don't…
My Print Parameters: Resolution: 0.2 Nozzle: 0.4 Seam position: Aligned Infill: 15% Top Layers: 6 Bottom Layers: 5 Perimeters: 2 Rafts: No Supports: No Material: PETG Prusament Signal White/Lipstick Red, Urban Grey Happy printing!
Made as a copy of original part from Automotive Lightning (AL), which costs around 20€. Lip of the original part is in Z-direction. To make it easy to print i moved it flush with bottom. My Print Parameters: Resolution: 0.2 Seam position:…
Fan: dimension: 30x30x10mm hole distance: 24mm hole diamenter: 3mm You would need: 4x M3x12 screws option 1: electronic switch connected to Receiver https://www.aliexpress.com/item/1005003353247323.html option 2: soldering the +/- wires…
My acryl plates are a bit smaller than the enclosure. These are sealings to reduce the gap between legs and acryl. Printed from PETG, no supports needed. Full Material. You need 2 pieces to fit one side of the acryl. 5mm variant - max 5mm…
I was not able to print the walls parts on my Prusa MK3S+ . The original author, PurchenZuPoden was so nice that he has included the STP files, so after few minutes in CATIA the walls separation was done. No need to glue all the parts…
My Print Parameters: Resolution: 0.20 Infill: does not matter Perimeters: 2-4 Rafts: No Supports: Yes Material: PETG, ABS, ASA, PLA…
Triangle Printed from PETG Raft layers: 2 Overhang treshold: 0 Custom supports to easy clean the parts Perimeters: 5 Top layers: 8 Bottom Layers: 6 Sealing for triangle Printed from Fiberlogy MattFlex 40D Prusa Slicer Standards If you…
Professionally 3D Scanned model converted with FreeCAD and edited with CATIA v5. 3D scanned and remodelled. Part divided for future upgrades and it fits to Prusa MK3S+. Pocket version - just a simple pocket in the cover AL-KO cover beer…
Another Half-Life-ication for your printer :D No special settings. Printed from PETG Prusa Jet Black and Prusa Orange.
Adaptor for smaller shocks - example you need to print from ludog's 1/8th 1/10th offroad RC shock stand : foot 2x side Print settings: Anything you like. I have used 0.8 nozzle with 0.4 layer height - Prusament PETG Supports: No
After this cover modification, you can accomodate 2x18650 batteries, probably also some other ones. Print parameters: Material: mine is Prusament PETG Anthracite grey
Mine is printed from PETG , but you can choose any reasonable material Dimensions: OD: 60mm Height: 100mm Wall thickness 2,5mm Recommended Parameters: Perimeters: 4+ Brim: Yes Supports: No
Pipe OD: 25,4mm (1 inch). My Print Parameters: Resolution: 0.2 Infill: 20% Perimeters: 4 Rafts: No Supports: YES Material: PETG or any UV resistant
I really like the idea from geeklimit, but I was not able to finish the project in europe. Looking for cheap pipe with ca D=25mm I found grey drain pipe DN25. They are up to 2,5mm long, but I think it will hang bent. On my 160mm wide…
There was nothing like this for Electrolux on the internet, so I created one. My Print Parameters: Resolution: 0.2 Infill: 15% Perimeters: 3 Rafts: No Supports: No Material: PETG, ASA, ABS, whatever
No supports. Easy and fast to print.
Print it with the cylinder heading upwards. Supports needed only on unvisible surfaces. V1 - Original Turnigy antenna V2 - Antenna with SMA Connector (WiFi) Print settings: Layer height: 0.2mm Top Layers: 7 Bottom Layers: 5 Supports:…
Prusament PETG, Quality - 0.2, Infill 15. No supports needed!
Should work with 40mm pole and Foscam cameras. Foscam Holes distance: 44mm U-Screw holes distance: 50mm My Print Parameters: Resolution: 0.2 Infill: 20% Perimeters: 3-4 Rafts: No Supports: No Material: PETG or any UV resistant
Remix from original https://www.thingiverse.com/thing:4262206 . Mine was printed from PETG, used a superglue to glue it directly to camera replaceable cover. The Slider now covers also the annoying LED . No need to use sock to cover it :)…
The easy way how to install Zemismart AM15 smart blinds motor to window frame/door. Perimeters: 5 Material: PETG
I was too lazy to open the CAD software. You can be too… just: open my 3mf file in Prusa Slicer adjust the X+Y axis of the Modify X+Y cylinder Slice it! Done! Please see the PurchenZuPoden's SWEDISH BIRD HOUSE
My Print Parameters: Resolution: 0.2 Seam position: Random Infill: any Perimeters: 4 Rafts: No Supports: No Material: PETG I used the 4x10 screw with lens head to fix it to the plastic sill.
I have first printed the test ring to test the tight fit. After test I did not changed the scale and it workes very well. Bottle OD:95mm My Print Parameters: Resolution: 0.15 (you will not save much time with 0.2) Infill: does not matter,…
My Print Parameters: Resolution: 0.2 Seam position: Random Infill: any Perimeters: 4 Rafts: No Supports: No Material: PETG I used the M4x30 screw. You can stick EVA foam to increase friction to table.
I have printed the original parts and when everything was complete, I have realised that the rising of the 3D printers feet only does not help. I have to rise also the side boxes. So there is a freestanding connector to fit the original…
Material and time saving solution.
The side drawers are perfect solution, but I missed the right logo…
I made it so: PETG Resolution 0.20 QUALITY Infill 30% Perimeters 8 Solid Layer T10 B6
These are all currently available results.
