1 / 5
Engine Radiator Fan upgrade for 3DSets Bamboo FJ40
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
If you ever drove with the F40 during heat waves, you will probably need the active fan.
- Rating
- 5 / 5
- Likes
- 21
- Downloads
- 88
- Makes
- 3
- Views
- 882
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- GNU General Public License v2.0
Fan:
- dimension: 30x30x10mm
- hole distance: 24mm
- hole diamenter: 3mm
You would need:
- 4x M3x12 screws
- option 1: electronic switch connected to Receiver https://www.aliexpress.com/item/1005003353247323.html
- option 2: soldering the +/- wires of the fan to +/- contacts
Print parameters:
● Solid layers - Top / Bottom (0 layers)
● Fill angle: 90 degrees
● Infill density: 40%
● Infill type: Aligned Rectilinear
● Perimeters: 3