1 / 5
Engine Radiator Fan upgrade for 3DSets Bamboo FJ40
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
If you ever drove with the F40 during heat waves, you will probably need the active fan.
- Ocena
- 5 / 5
- Polubienia
- 21
- Pobrania
- 87
- Wydruki
- 3
- Wyświetlenia
- 882
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- GNU General Public License v2.0
SzczegółyPliki (5)Wydruki i komentarze (Wydruki: 3) (Komentarze: 3)Remiksy (0)Kolekcje (54)Powiązane
Fan:
- dimension: 30x30x10mm
- hole distance: 24mm
- hole diamenter: 3mm
You would need:
- 4x M3x12 screws
- option 1: electronic switch connected to Receiver https://www.aliexpress.com/item/1005003353247323.html
- option 2: soldering the +/- wires of the fan to +/- contacts
Print parameters:
● Solid layers - Top / Bottom (0 layers)
● Fill angle: 90 degrees
● Infill density: 40%
● Infill type: Aligned Rectilinear
● Perimeters: 3