Counting matching models…
Go to https://www.patreon.com/lilykill to support the original creator. Materials selection: Handle - I recommend a wood-filled PLA, but not the Bamboo powder ones. They're too light. I used a walnut filled PLA to get a darker finish,…
I recommend printing this in PETG or ABS. I used 100% infill as there isn't much difference between sparse and filled for this model. Recommended print orientation is with the base vertical. I used a brim to keep the narrow arms from…
Nested and keyed Beverage Can Dispenser for standard USA SLIM cans (12 oz. / 355 ml). I split it into two halves so it can be printed on a standard Prusa printer (MK3/MK4). The two halves are keyed together and glue is NOT required for it…
You might need slightly longer pcie screws depending on your case.
File down the cleat to adjust fit.
A storage option for filament rolls. As connection I used ½" EMT conduit which can be bought in most hardware stores. With a length of 3-5ft and an infill of 15% (gyroid), the system holds well. At lengths over 3ft you should perhaps…
I combine a few of these on one build plate to save on supports.
Remix of mhparsons can dispenser sized for EuroCans
Mount contains screw holes for 6/32 or equivalent screws, but you can also use double-sided tape.
I printed this with a single color printer. Swap the filament at 1.8mm between a reddish brown for the “gingerbread” and a white for the “icing”. I used A cherry wood-filled PLA and standard while PLA. I recommend ironing to clean up the…
The source marked this model as adult content.
Keeps your cable tidy after relocating your runout sensor. I use 8 clips for my printer.
I've provided both full models, and a left and right split sub-model. This split model uses filament scraps as locating pins to glue the sub-models into a single piece. I recommend superglue for the connection. Depending on your printer…
Needed for use: 1/16 rubber sheet or equivalent US penny or equivalent 6/63 grub screws, ¼ inch (ish) for outlet: https://www.amazon.com/gp/product/B0CCNDBD2G/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 Uses 3x 6/23 screws and nuts…
I designed a base to recess an LED tealight below Sabre Design's “Halloween Ghost”. https://www.printables.com/model/1004723-halloween-ghost. The ghost shape is also is recessed slightly into the top of the base to keep everything…
Ryobi 18V ONE+ Power Scrubber Wall Mount (P4500) Keep your garage, utility room, or cleaning station organized with this custom wall mount for the Ryobi 18V ONE+ Power Scrubber (Model P4500) . This mount securely cradles the tool body…
I've given two options for the 3D model. A single file for you to split depending on your available print area A pre-split part with 1.75mm locating holes. You may need to drill them out slightly depending on you printer settings, but…
Requires 2x m4x16 screws – 6mm longer than the originals. This works well with my nebula camera mount – keep the USB cable tidy.
There's a hole for an M5x6x7 heat-set insert, but it's not necessary. You can put a bit of silicone or CA on the threads and it will hold.
It's a little tough to slip on, but should hold to the Echo pretty well.
Arcane Relic Shadowbox – LED-Ready Tabletop Display Diorama The scene depicts a ruined stone chamber framing oversized spell cards, a raised relic pedestal holding a glowing D20 , and a 25 mm-base adventurer miniature mid-incantation.…
Fits remote for Yamaha AV Receiver RX-V2085 RX-A2080, RX-A3080. Can be mounted with sticky tape or 4x 6/23 screws (or equivalent).
Includes a carabiner hook for attaching the lock to your keg. Print on the flat side (like an L) if using PETG. Print with the claw side down (stronger loops to grasp the filler pipe) when using PLA.
I used filament scraps to index the 2 halves and prevent supports. You might have to widen the indexing holes with a small bit to get everything seated.
Ryobi 18V ONE+ Power Sprayer Wall Mount (P2800) This wall mount is designed specifically for the Ryobi 18V ONE+ Power Sprayer , providing a clean, secure way to store your cleaning sprayer when not in use. Perfect for garages, utility…
These are all currently available results.
