Ryobi 18V ONE+ Power Scrubber Wall Mount (P4500)

Ryobi 18V ONE+ Power Scrubber Wall Mount (P4500)

Keep your garage, utility room, or cleaning station organized with this custom wall mount for the Ryobi 18V ONE+ Power Scrubber (Model P4500). This mount securely cradles the tool body while allowing the battery to hang freely, keeping everything accessible and off your work surfaces.

Designed to match the shape and balance of the Ryobi P4500, the scrubber slides smoothly into place and stays put without clips or latches. The angled support arms distribute the load evenly, making the mount sturdy and easy to use with one hand.

Features

• Designed for Ryobi 18V ONE+ Power Scrubber (P4500)

• Secure, gravity-held design

• Wall-mounted storage keeps your scrubber off counters and shelves

• Allows battery to remain installed while mounted

• Simple, clean look that fits garages, laundry rooms, and utility spaces

• Three-screw mounting for a solid hold

Printing Recommendations

• Material: PETG (recommended)
  PETG is suggested for improved heat resistance and durability, especially in garages or utility rooms.

• Infill: 10% gyroid
  Provides excellent strength while keeping print time and material usage low.

• Supports: None required

• Orientation: Print with the wall-facing side down on the build plate

• Layer height: 0.2–0.28 mm recommended

PLA will work for indoor, climate-controlled spaces, but PETG is strongly recommended for long-term use.

Mounting Hardware

• Imperial: 3 × #10 pan-head screws

  • Wood screws for direct mounting into studs

  • Or #10 pan-head screws with appropriate wall anchors for drywall

• Metric alternative: 3 × M5 pan-head screws

  • Use with suitable wall plugs/anchors for your wall type

Note:
The mounting holes are countersunk, but pan-head screws are recommended. The countersink provides clearance and self-centering while the pan head offers better load distribution and clamping strength than flat-head screws.