Counting matching models…
This was created by Thingiverse user still11, and is licensed under cc. GO AWAY GNOME by still11 on Thingiverse: https://www.thingiverse.com/thing:4968117 I just scaled it 80% and printed
I got this DXF file for Laser cutting or CNC machining and altered it a little to be able to print it instead. Then I made a little stand for it and printed them together and glued the stand on when done.
The idea and design was somewhat inspired by https://www.printables.com/model/29577-dyson-v11-wall-bracket-for-accessories-wandhalteru%2Fcomments I had a few things about it that didn't fit my needs so I made my own. All of them are hung…
Easy to print in 2 parts. I printed in PLA using Prusament Galaxy Black & Hatchbox White. After printing cut the tabs off the white parts and press them into the black ball. Make sure to line up the center dots correctly as they are…
After downloading and making a propane cap for a 20lbs tank I thought it would be nice to protect the threads on my propane heater and propane torch that I connect to that tank. So here you go a threaded cap that will protect those hose…
These 2 battery holders take the place of a D cell battery in the Battery Daddy storage box (or any other battery storage box) After all D cells are mostly for flash lights and who needs 8 of them. These holders are for CR2032 & 357/303…
Colt may claim that their Peacemaker is how the west was one, but that's a bit of a stretch. The truth is that repeatable firing weapons like the revolver were the real MVP. Before them we had black powder rifles and pistols the fired…
There are 2 models a large and a small. The ball on the back of both is 7/16 rad and is .380" in height. I use radius gages to measure the shells I find and then scale the models to fit the shells. for instance 7/16 = .4375" so if a she…
Tripod Phone holder fits Sunpak 757TM Tripod and many others. requires a long 10-24 bolt with head cut off or 10-24 threaded rod. will hold large phones like a Samsung Galaxy Note 10
I am not sure if this counts as a remix of another model. I downloaded and tried to print the model linked below. It would not sit flat and I could only get the 1st few layers to print before it lifted. So I made my own, the idea comes…
This gate on my dust collection system is for a 4" metal pipe in and has a 4" flex hose out. If you use my G-code take note of the nozzle size the top part (green) I used a .6 nozzle its because that green filament sucks and clogs a .4…
Camera Tripod shoe (mount) for Sunpack 757TM tripod. It should fit many Tripods
I have arthritis that makes it hart to load these clips. I made this loader larger than most would as it is more comfortable in my hand that way. It is for my Beretta 96 Vortec but it should work on any Beretta 96 as the 96 are all 40cal…
These caps are to keep my wood turning tools sharp between use. Wood turning tools are not dimensionally accurate as they don't need to be and as you sharpen them the size can change do to the steel not being a consistent size. For this…
Originally I designed it to match a bar table and it would have had legs, but time was short so I didn't do the legs and its actually better that way. The ones I made were given to my pool team and had the team name & the season on it as…
You are #1 in my book! Such a courteous driver you are! Have a really nice day @$$ hole! What ever the reason or the intention we have all been given and have gave in return this universal sign that F.U. Make it and leave it on the desk…
The Pizza cutters get damaged when thrown in a drawer with everything else. So now mine will not. My cutter is 2.67 dia
Protect your Nova Lite G3 chuck from the wood chips and dust with this backing plate dust cover. It snaps in for a good fit. There is also a cover for the chuck key holes (print it twice) these do not snap in. They are kind of in beta…
Needed 2 speaker boxes for a piano upgrade. They hold a 1.57" speaker. They require 2 pieces of .03" thick .08 round hole perforated stainless steel sheet 1.815" x 2.75" for the grills. Mounting screws at #8-32 2" long+ I used 2-½ long…
Printed on a Mini+ all settings in Prusa Slicer are default other than Black part = .15mm Quality, 20% infill White part = .10mm Detail, 20% infill The white part will be tight, go slow and get it started once it is low enough that the…
This is the carpenters bench you use to build a house in Elders Scrolls 5 Skyrim. I based the model on some pictures I found on the web and a screen shot I took from the game. I drew a ruff cad model basing of a life size work bench then…
This Y coupler for a shop dust collection system fits over a 6" metal ducking pipe. That would be the out side of the air flow (closest to the collector). Then it Ys into a 4" metal ducting pipe & a 2" PVC pipe on the in side of the air…
This is the 3 coupler in my system counting away from the collector. It fits into a 4" metal pipe on the side facing the air flow and a 4" metal pipe fits into it on the other end. It has a branch coming out for a 2" PVC pipe. This will…
The Ruger Blackhawk has an option when you have the 357 mag version to have a 2nd cylinder to be able to fire 9mm from the same gun. To protect the cylinder you are not using. I made this box. The printing on the top didn't work out as…
This tray is for infill swatches I printed that I found here on Printables.com The Infill Swatches are https://www.printables.com/model/30073-infill-swatches/comments/359904# This is just a tray to put them in. All the lettering is not 3d…
Made it for a friend who has a restaurant. Made it out of Prusament PETg Ultramarine Blue Transparent because that was the only PETg I had at the time and I don't think PLA would take the heat. I did .1mm Detail with 25% infill and…
This table insert fits a Delta 16" motorized Band saw. Model 28-560 The part has been discontinued. It was part # 426020630001S
This is bearing holders for a mouse bucket trap. I know over KILL but why not. Most people make these with a 5 gal bucket and add water to drown the mice that fall in. If you do that and leave it too long they get nasty and smell. So I…
I made this to use the miter Gauge off my Craftsman Table Saw (model 137.228010) at the drill press to drill several holes at different angles on a rounded block of wood. It seemed easier than rotating the drill table every hole and its…
If you have never taken this cap off be carful, the spring has a lot of tension. I had some trouble with warping when printing this, after trying a few different things I added 3 tabs to the model (see picture) to prevent the warping.…
When building the Ho railraod model Blast Furnace from Walthers. It is hard to glue the 4 small walls that make the brick pilons under the building and keeping them square and aligned at the same time. With this jig you glue 2 together…
The Craftsman 4-1/2" angle grinder nut will not tighten enough for a 1/16 thick cutoff wheel. There is a shoulder in the nut that is thicker than the wheel. This spacer ( washer ) will take up the difference and allow it to get tight. I…
This nozzle fits on a 4" flex pipe and is designed to attach to several other dust ports from other tools or vacuum line. Its kind of a jack of all trade connection for a dust collection system. Included is an adapter for a 2" vacuum…
I have always hated the pouch thing my Rad Gages came in. They spill out and are always a mess. Now they can sit on the shelf and are ready when I need them. The words Brown & Sharpe are not in the stl file. They were a addition with a…
I wanted a simple way to cut the line that I bought a big roll of for my yard trimmer. I came up with this pipe design its not perfect as I was looking for 8-¼ pieces and they come out 8-3/8. But that's fine so not worth reprinting. Its 3…
This is for the Chicago Electric router table sold by Harbor Freight. This attachment is to connect to my 4" Nozzle https://www.printables.com/model/346641-dust-collector-4-nozzle
This box cover will protect the face and center screw of my 4" screw chuck. It has box for more screws in it. When I printed I used no supports and the center came off and the bottom was ugly. I plastic welded it together and melted more…
Designed for the Spyder Tarantula Hole saw but should work on most any brand 4-1/4" (108mm) I have made it short for that reason and to save on filament. I used .15mm Speed @ 20% infill I used no supports and you can see in 1 picture were…
These 2 Elbows bring the 3rd branch line back to being parallel with the main trunk after the line branches off the main thru my 3rd coupler. https://www.printables.com/model/230567-dust-collector-coupler-3 It then goes under a window…
I was always moving my head back and forth to see the needed on the indicator due to the glare of the over head lights. Now it is shaded so from my viewpoint there is no glare.
This slide fits a metal inspection plate I use with a height stand holding an indicator over a V-block to inspect runout on a part I make on a wire EDM. I need to adjust size and center pint between different designs of this part. So I am…
The round part has a step in it and it wants to tilt forward. So this support helps to hold the part
We use Sheffield air measurement machines to inspect hole sizes. The air lines are always open and make a hissing sound. This block will hold the 2 gages I most commonly use ( .1265 & .1304") and it muffles the sound so I don't hear it…
A case for a Compass that is mounted on a retractor. to protect the compass from damage when traveling to and from a dive site. Has a 1/4-20 hole to be able to lock it shut if you want, I thought I would put a bolt in it but haven't yet…
These are all currently available results.
