Counting matching models…
I made this float for a friend I made 12 for him out of the 12 he said that one of them let in a little water but he's still using it, it is made with a 5% infill and with PET-G you can change where you want the colour change in prusa…
here is a screen cover for the K1 and K1 Max and K1C and K2 plus supports maybe required all depends on how well your printer is calibrated i put a slight chamfer on it so that the door does not catch If you like the model please leave a…
i made a hanger/holder for my dewalt DCS391 circular saw it has 15% infill and 4 perimeters just retract the blade up as high as it goes and place it in the hanger whilst pulling the guard back
I made this fishing float for a friend he tried it out then I got conned into making another 10 I used transparent for the bottom then white and then orange or yellow for the top all in PET-G with a 5% infill
The colour change is at the 1.80 layer at a 0.2 layer height with a 15% infill you can use the blank and Prusa and original Prusa covers for either the mk4 or the xl/MK4S/MK3.5S/MK3.9S/CORE ONE+/CORE ONE L+ add a like
I made this so i can either use it as a tool tray or as a filament bin if you have one on either side you can use 1 a bin and the other as a tool tray I used 15% infill pla filament this tray/bin will fit on the mk4 and mk3 the side clips…
camera mount hooks on to the side of the extrusion on the Prusa i3 mk3s I have a magnetic base on my camera so I have screwed the metal plate that came with it which holds it in place or it can just sit on top the last picture is the view…
just got the camera and had no way of mounting the camera so I quickly made this one that just slots into the extrusion I may change it at a later date if I do I will add then to here. support is needed
This is a spool holder that is made in pla you will also need 4 x 608Z bearings. Maximum width for spool is about 110mm as you can see in one of the pictures I got some rubber feet to place underneath to stop it sliding if knocked. Fixing…
This is a remix of the original by LoboCNC i made it with 2 wheels so it grips the broom/pole from both sides still need the elastic bands but does the job
This hanger will hold the Dewalt DCN692N 1st fix framing nail gun printed in PLA can be done with PETG, Nylon, Carbon fibre ect.. depends on your preference with 50% infill and the perimeters at 4
I made this model because I couldn't find anything to do with only fools and horses the print lifted in the bottom right corner slightly as you can see in the picture I will do it again at some point it has 4 colours at 11 ½ hours to…
i made this silicon tube holder so that they are easy to find i printed it at a 0.2 layer height with 12% infill and with PET-G you just need 2 x 35mm screws to attach to shed ect.. if attaching to brick work longer screws may be required…
This hanger will hold the Dewalt DCN660N 2nd fix finishing nail gun printed in PLA can be done with PETG Nylon, Carbon fibre ect… depends on your preference with 50% infill and the perimeters at 4
A friend asked if i could make a target for him to shoot so i came up with this he seems happy with them as i get asked to print more he does'nt care on the colour so i use ends of reels. You can make the targets a different colour than…
This is a reset key for a emergency door release lock for factory/office
key hanger I printed this on the mk4 with input shaper which puts the layer height at .2 I added a 15% infill and in PLA you can print in PETG, ABS ect… your choice I done the colour change at 4.20 layer height the last 2 pictures of the…
This is a desk grommet that fits a 40mm hole and is 30mm deep I've made this so it has a wider brim/collar also a split 40mm grommet as the end of the cable wouldn't fit through the solid grommet the split takes 4minutes longer to print
i designed this riser to be a little taller as mine kept hitting the lid on the smaller riser that id downloaded i made it 40mm so i now have more clearance i printed 2 with the larger stem and 2 with the shorter stem due to the magnets…
this is a small latch to keep a shed or small gate closed you will need 3 of the brackets for printing plus six small screws
These coasters are made with a 0.2 layer height 15% infill they was printed on my Prusa XL or you can use a AMS or MMU for your colouring just download and keep the original colours or any colour you like and any type of filament of your…
this is a handy hanger for my mini angle grinder i used 3 perimeters with a 0.2 layer height PETG was used as it will be going in my shed
I lost the feet that came with the racking so I made these as replacement the seem to work well at the moment these are printed with a 0.30mm layer height with a 15% infill and with TPU filament on the G code is for 4 feet
this just slots into the extrusion little support is needed below hooks
I decided to make this because i was sick of not finding the remote controls i have made this with 3 perimeters and 15% infill and in PLA i found that printing it on its side and with organic supports worked fine for me this actually…
the jolly boys outing poster 0.2 layer height only 2 colours yellow 3.40 black 3.40 - 4.40 15% infill
this is printed with 100% infill at a 0.30 layer height and in PLA with 1 colour change at layer 2.00
I designed this so it can be printed on a multi colour printer with a mmu or multi tool head as that is how I printed it it is at a 0.15 layer height with 15% infill I also printed it face down so you get a better finish i also used pla i…
This model has a .2 layer height 3 perimeters and 15% infill and in PET-G i have made it with bumps on the inside for airflow all you need is 2 screws to attach to cupboard, wall ect..
I found this ideal for hanging my outside lights up just add a screw and that's it
The other half wanted some slightly grippy feet for are kitchen table chairs I made these out of tpu inside dia 32.7mm the chair legs come down at an angle and it just so happens that the legs are grey and the tpu I have is also grey lol
i made this plaque of delboy rodney and uncle albert layer change was at 3.50 at a 0.3 layer height and in pla with a 20% infill I only ironed top layer only to keep the print time down
ID card holders: I printed these in PETG with a 0.2 layer height, 3 perimeters, gyroid infill at 15% i recommend that support is required everywhere. You can add text in your slicer. If you have the text raised, you can do it on a…
Needed a holder for my van yet to try in the car
I made this for a friend i printed it PET-G at a .2 layer height 15% infill and on my Prusa XL for the different colours i also put a few stripes on it via the slicer it holds 3 magazines for a nice snug fit
I made this dish as my last one got eaten by the lawn mower I have made this a little larger than the original so I have no hardly any moment when it sits in the ring
I use this to identify what filament I have in my printer when I finish a print I normally just cut the filament and bag it and store it away I place marker there to remind me the next time I go on what filament I have to eject from the…
I designed this so it can be printed on a multi colour printer with a mmu or multi tool head as that is how I printed it it is at a 0.15 layer height with 15% infill I also printed it face down so you get a better finish i also used pla i…
printed in PET-G 15% infill 4 perimeters gyroid infill the end brace's also in PET-G at 15% infill with 3 perimeters and gyroid infill a little bit of advice if you use the brace's make sure that both ends top and bottom are the same way…
i made some clamps to pin my plastic greenhouse to my wooden surround that it sits on, i used 15% infill 0.3 layer height and petg filament
This is a coaster set of 4 coasters if you need more than 4 coasters you can change the height in the slicer for the holder to accommodate the extra coasters they are 100mm in diameter and 5mm thick they are printed in PETG at a 0.2 layer…
side tray with camera stand once again I also printed this without the lid I had a camera stand but no tray so I decided to combine the 2
I designed this so it can be printed on a multi colour printer with a mmu or multi tool head as that is how I printed it it is at a 0.15 layer height with 15% infill I also printed it face down so you get a better finish i also used pla i…
This trolley coin holder is made with a 0.2 layer height 20% infill and with PET-G 3 perimeters and infill i used gyroid and supports are needed The coin is at 0.2 layer and with 15% infill also used PET-G 3 perimeters and gyroid infill
made these so that it cleans the nozzle so that it does drag stinging everywhere this is the t nut i printed as well https://www.printables.com/model/785141-m3nes-t-nut-with-spring-for-standardized-nuts/comments/1964233 you just need a…
Vacuum pump just got a pain just sitting on the desk in the way, so I decided to make a holder/hanger it has 15% infill with a 0.15 layer height with 3 perimeters and it will need supports and done in pla just 2 screws needed to fastened…
made this for my apple watch series 8 fits ok and it does the job looks like I had a bit of black come through when printing still works
I had a led light bar and I just had to find a way of supporting it, I made 1 of them then I just mirrored it to get the other 1 I made the holes a little bigger than the light so if I replaced the light at anytime it could accommodate a…
Made with 15% infill 0.2 layer height and printed with PET-G no supports needed just a couple of small screws to hold in place
camera mount designed to fit at the end of the arm on the prusa xl it was printed with PETG with a 0.2 layer height 15% infill 3 perimeters gyroid infill i also used supports. The inside diameter is 76mm there are 2 designs one with a cut…
The model has 3 perimeters 15% infill 0.25 layer height and printed in PLA i needed something that was going to keep my snips pliers and ipa bottle all in one place i put a slot on the side for my cleaning cloth i also have 2 different…
ukraine poppy support needed on the front part then you just need a bit of glue to hold the back in. The stand may need a little glue but I found holds tight if push in tight This is printed on a flsun qq-s so the print may size may…
I made the clip 0.45mm thinner due to the different collets that I have the thickness is 0.9mm now, the original clip does fit other collets that I have
i made the spacer 100mm longer as i needed a 100mm spacer between each string of lights
This filament guide is because the dryer that i have, the filament comes from over the back so by having a guide it holds it away from the dryer the guide attaches to a prusa mk3/mk4 i printed it PETG with 15% infill 3 perimeters gyroid…
These are all currently available results.
