1 / 5
Prusa XL camera mount
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution
camera mount designed to fit at the end of the arm on the prusa xl it was printed with PETG with a 0.2 layer height 15% infill 3 perimeters gyroid infill i also used supports.
The inside diameter is 76mm there are 2 designs one with a cut out for the cable and one without
You can use any camera as long as the base of the camera is no larger than 76mm