P
PrintablesJEBurroughs
Logitech G920/G29/G27+ shifter paddle extender
Snap on extensions for using larger wheels.
- Downloads
- 395
- Likes
- 45
- Rating
- 5
All models
Counting matching models…
P
PrintablesJEBurroughs
Z Axis Lead Screw Coupler 5mm to 8mm for Ender/ Aquila
Z Axis Lead Screw Coupler 5mm to 8mm for Ender/ Aquila I found what I wanted here... https://www.thingiverse.com/thing:4150872/files ONLY to realize it was way too big after I printed it. It say's it's 5mm to 8mm but it's more like 6mm…
- Downloads
- 309
- Likes
- 29
- Rating
- 0
P
PrintablesJEBurroughs
Ender 3/Pro/V2/Voxelab Aquila - Z-Axis Stabilizer using 616mm GT-2 Timing Belt and F688ZZ Flanged Ball Bearing
I haven't done much printing, but I found that neither of my printers care for having the timing belt system going. They were both printing like crap, so for an acid test I took this off both any they started printing great again. So at…
- Downloads
- 245
- Likes
- 46
- Rating
- 5
P
PrintablesJEBurroughs
X-Axis Z-Axis MGN12 Linear Rail MOD for Ender 3, Pro, V2 and Voxelab Aquila Includes my FANG DUCT MOD
This started with a linear rail X axis mod I did for the Aquila. I have since added Direct drive versions and for stock wheels. Found here https://www.printables.com/model/332268-voxelab-aquila-x-axis-mgn12-linear-rail-conversion. This…
- Downloads
- 177
- Likes
- 34
- Rating
- 5
P
PrintablesJEBurroughs
New Concept - Quick Release for Sim Racing Steering Wheels
11/13/2022 UPDATE I removed the old handle and uploaded a new version. My second version cracked so I increased the height of the locking tabs by 2mm. It fits tighter now. I made the handles more printer friendly and they are less…
- Downloads
- 157
- Likes
- 28
- Rating
- 0
P
PrintablesJEBurroughs
AnkerMake M5C Magnetic Filament scrap catch tray with embossed clips.
Just another version of the left side filament catch tray. I made mine to extend further towards the wheels. It's a plain flat tray, nothing flashy. It has pockets for 12mm magnets to help hold the rear to the upright. I wound up using 2…
- Downloads
- 128
- Likes
- 26
- Rating
- 0
P
PrintablesJEBurroughs
Ender 3 Style Filament Spool Locking Clips and Spacers
Ender 3 Style Filament Spool Locking Clips and Spacers How To video... Just a way to keep from accidentally knocking your spool off the holder. Variety of spacers. 2 Types of clips. One is just a little tighter than the other. Added to…
- Downloads
- 127
- Likes
- 11
- Rating
- 5
P
PrintablesJEBurroughs
Rlaarlo Omni-Terminator Truck and XTS-S10 Rally Car Minimal Steering Servo Mounts.
4/23/2026: UPDATED I made a new version that is much stronger and correctly lines as if it were in the original mount. This also works for the XTS-S10 Rally Car, and I assume the upcoming Short Course Truck. I wanted to get rid of the…
- Downloads
- 105
- Likes
- 11
- Rating
- 5
P
PrintablesJEBurroughs
Graphics Card Support Screw for TPU 60 to 120mm range.
My take on a Graphics Card Support Screw. Made to be printed with TPU so that you don't need anything sticky to hold it in place. Screw makes it ease to size up or down. Should range from 60 to 120mm. If you need a different length then…
- Downloads
- 102
- Likes
- 11
- Rating
- 0
P
PrintablesJEBurroughs
AnkerMake M5C Cell Phone holder
I forgot the charge port hole, go get the fixed version here… https://www.printables.com/@tenchiken_2597318 Made this one to be easy to print, light weight and stable. Prints on the big side with no supports.
- Downloads
- 102
- Likes
- 25
- Rating
- 5
P
PrintablesJEBurroughs
Voxelab Aquila X-Axis MGN12 Linear Rail conversion- All Printable
UPDATE 1/23/2023 NEW BELT RETAINER and FANG Mount The original belt retainer broke after a long time in service but I decided to re-engineer it anyway. I forgot to measure to length, but I cut a piece off a roll that was about 6 inches…
- Downloads
- 87
- Likes
- 13
- Rating
- 0
P
PrintablesJEBurroughs
G27 Pedal Model for creating projects
ATTENTION: Updated many little incorrect measurements. No matter how many times I look I find a little thing, so PLEASE check back to see if I have posted an Update. V11F is most current, Includes the 2 metal pieces along with the 2 shock…
- Downloads
- 84
- Likes
- 9
- Rating
- 0
P
PrintablesJEBurroughs
Voxelab Aquila / Ender 3 Y Axis Motor Mount for Damper With Cooling Options
July 13, 2022 UPDATE: I Converted my Ender 3 Pro to a V2. This worked perfectly on it as well, and should work for any Ender 3 style I would think. Voxelab Aquila Y Axis Motor Mount for Damper With Cooling Option "USES THE ORIGINAL…
- Downloads
- 82
- Likes
- 14
- Rating
- 0
P
PrintablesJEBurroughs
Ender 3 V2 locking bed knob for Silicon Springs
Wanted to use this design with my silicon springs and added handles. Great concept so I chose it. I added a 3mf with the supports on the strain relief so you could see how I did it. Printed on my 2 Aquila's converted to Ender 3 V2's using…
- Downloads
- 73
- Likes
- 21
- Rating
- 0
P
PrintablesJEBurroughs
Rlaarlo Omni Terminator Truck and XTS S10 Rally Car Full Steering Servo Mounting Adapter
I found a few already online and I found that they sucked so I made one that works slick and is really stout. This adapter allows a full size steering servo to be used on the Rlaarlo Omni Terminator Truck and XTS S10 Rally Car.
- Downloads
- 71
- Likes
- 7
- Rating
- 0
P
PrintablesJEBurroughs
Battery Dummy Storage Compartment for DJI Mini 2, 4K and Specta Mini Drones
This is a compartment box that is same size as the batteries for the DJI Mini 2, 4K and Specta Mini Drones. It will store inside the drone and can hold spare propellers and such. Has a dovetailed sliding lid with a finger catch to held…
- Downloads
- 62
- Likes
- 9
- Rating
- 5
P
PrintablesJEBurroughs
DJI RC2 Controller Desk and Remote Stands
A variety of desktop and mobile styled RC 2 stands. Some attach to the controller and some just rest on the desk. This allows for a 45 degree slant. Easy reading and a quick handhold when reaching for the controller. I have some that are…
- Downloads
- 62
- Likes
- 1
- Rating
- 0
P
PrintablesJEBurroughs
Holy Stone HS720E Elevated Modular Skid System for Ground Level
UPDATE 10/05/2024: Added Large Pontoon Floats. UPDATE 10/02/2024: I have reworked everything and added many more options. I have added a lift ring as well. It is super sturdy. This is a 20mm elevated modular skid system for the Holy Stone…
- Downloads
- 59
- Likes
- 9
- Rating
- 0
P
PrintablesJEBurroughs
Sim Racing Button Box Steering wheel adapter.
5/22/2023: UPDATES Optional Wheel Coupler Spacer I uploaded my first version of the Paddles to try. I printed them with TPU @ 40% infill no support and they are the cat's meow! This Wheel Hub, Button Plate and Shifters was meant to be…
- Downloads
- 59
- Likes
- 17
- Rating
- 0
P
PrintablesJEBurroughs
45mm High Poly Rings for Crafts
My wife wanted some rings to use on a project where she makes the Gnome characters. You can print 16 in about 2hrs 15min. I included the 3mf with my PrusaSlicer 2.6.0 settings set with a full bed of 16 rings. Gcode is also included.
- Downloads
- 55
- Likes
- 18
- Rating
- 5
P
PrintablesJEBurroughs
TM1638 Enclosures for V1.2 and V1.3
I have enclosures to work with ProMicro and NANO boards as well a a generic version that is trimmed down. TM1638 comes in 2 versions 1.12 and 1.13. They are physically different and only the 1.12 would work with the original. I also made…
- Downloads
- 50
- Likes
- 3
- Rating
- 0
P
PrintablesJEBurroughs
Ender 3 / Aquila Frame Rails for Sizing and Modeling
Ender 3 / Aquila Frame Rails for Sizing and Modeling This includes all the separate rails in their correct locations and with correct measurements. I only included holes for the X-Rail Member. It also includes a complete stl with all the…
- Downloads
- 39
- Likes
- 7
- Rating
- 0
P
PrintablesJEBurroughs
Ender 3 V2 Slotted Pivoting LCD Display Bracket Mount
Ender 3 V2 Slotted Pivoting Display Bracket Mount Title say's it all. Basic bracket that has 1 fixed and 1 slotted opening so you can mounting same as the stock bracket. I hated the stock brackets fixed location and this fixes that. Let…
- Downloads
- 38
- Likes
- 7
- Rating
- 0
P
PrintablesJEBurroughs
Holy Stone HS175D Progressive Suspension Landing Strut Dampening system for Drone
This could be altered to accommodate many different applications. I am currently working on a version to use on the drawers and shower door in my Transcend Camper. I have uploaded a 10mm version that is quite a bit lighter and does the…
- Downloads
- 38
- Likes
- 3
- Rating
- 0
P
PrintablesJEBurroughs
4040 extrusion Dual V Slot 100mm Extension Blocks and Hinge
4040 extrusion Dual V Slot 100mm Extension Blocks and Hinge for use with T-Nuts \\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\ PS: I know you see the nuts protruding on my hinge mounting plate but that's because that is my first print and that's…
- Downloads
- 36
- Likes
- 6
- Rating
- 0
P
PrintablesJEBurroughs
Fiber Punk Node Pro Mounting Enclosure with Flip Cover
Update: I sent the piece of junk back to Amazon. Wifi connects really easy but the rest was a nightmare. One printer wont read the fake SD card but will home the printer, the other printer, did read the SD and would start the print, tilt…
- Downloads
- 36
- Likes
- 0
- Rating
- 0
P
PrintablesJEBurroughs
48 space Cricut Pen holder with 3 compartment detachable basket
UPDATE 1/11/2023: By request, I have added a smaller version that fits on a 180mmx180mm Build Plate such as the Prusa Mini has. Holes are the same I just pushed them all closer together. I have not printed them, so please let me know if…
- Downloads
- 35
- Likes
- 11
- Rating
- 5
P
PrintablesJEBurroughs
Voxelab Aquila Adjustable X Limiter Housing and 13mm Spacer
UPDATE: Added the open spacer that somehow got left out. V5.stl \\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\ V6: Added a spacer that covers the open area that was exposed behind the Limit switch housing. \\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\…
- Downloads
- 33
- Likes
- 5
- Rating
- 0
P
PrintablesJEBurroughs
Meanwell LRS 350 Twin 60mm Fan cover with honeycomb vents
Simple cover I made for the Meanwell LRS 350 so I could run 2 60x25mm fans in a “Push-Pull” arrangement. My Printer is on raise feet so the fans are just mounted to the outside and protrude below the printer. This will only work with…
- Downloads
- 33
- Likes
- 5
- Rating
- 5
P
PrintablesJEBurroughs
Under Controller Phone Mod for Holy Stone Controllers
I was never very fond of the Holy Stone controller phone placement on my HS720E controller so I made this mod that hold my old iPhone 7Plus that works like a champ for a dedicated drone screen. This allows the phone to slide into a custom…
- Downloads
- 29
- Likes
- 1
- Rating
- 0
P
PrintablesJEBurroughs
Holy Stone HS720 Series Directional Accents
UPDATE: 10/8/2024: I was out today testing things and the hex version does cause some turbulence. I hovered at ear level with and without and I could hear it. I removed the inside hex material and left the ring. Should still server the…
- Downloads
- 26
- Likes
- 3
- Rating
- 0
P
PrintablesJEBurroughs
DJI Specta Mini 2/4K and so on Blade Brakes
It's a simple TPU Print. This print attaches from the bottom of the Motor Arms by spreading the corresponding Blade Brake, and pushing up. The front unit will have a noticeable taper and bigger vertical taper faces the rear. The rear is…
- Downloads
- 25
- Likes
- 4
- Rating
- 0
P
PrintablesJEBurroughs
Radial Fan - Clip on - Mount for Ender 3 style X Carriage Stepper Motor Cooling
Radial Fan - Clip on - Mount for Ender 3 style X Carriage Stepper Motor Cooling Whewww...Long Title I know, I know!!! I mainly wanted to, more than needed to, make a Cooling fan for the X stepper motor. I scrounged in my fan box and found…
- Downloads
- 25
- Likes
- 9
- Rating
- 5
P
PrintablesJEBurroughs
Holy Stone HS720 series controller phone shim
You can't get ton the to side buttons on the controller when you have the phone on. WTF were they thinking when they made it that way. My finder wont fit. Out of anger I made this basic wedge to go under you phone to get it off the top of…
- Downloads
- 23
- Likes
- 2
- Rating
- 0
P
PrintablesJEBurroughs
FANG Duct with Center mounting BLTouch for Aquila and Ender 3 V2 and 3 Pro
UPDATE: 3/3/2023 I added the file “BLTouch_Mount_JB_V10”. This adds 3mm's of vertical adjustment. I found that when I changed my nozzle to a .6 it was longer and hit before the BLT and I rammed the bed hard. So when you set your BLT made…
- Downloads
- 23
- Likes
- 4
- Rating
- 0
P
PrintablesJEBurroughs
DJI RC-N2 to RC2 Mounting Holes Adapter
This adapter allows an RC-N1/2/3 Controller to emulate the same 4mm holes and spacing. Thus allowing either lanyard hooks or any device you with to attach it to or to it.
- Downloads
- 22
- Likes
- 2
- Rating
- 0
P
PrintablesJEBurroughs
UniTak3D Rail X-axis Conversion Belt Fix with added LED Bar
https://www.amazon.com/dp/B09M73XRBH?psc=1&ref=ppx_yo2ov_dt_b_product_details UniTak3D Rail X-axis Conversion Belt Fix with added LED Bar I got one of these kits because I installed a BLV rail kit a year ago and the rails were crap. So…
- Downloads
- 21
- Likes
- 1
- Rating
- 0
P
PrintablesJEBurroughs
RV Screen Door Handle Installation Jig and support channels.
I have watched so many videos of really bad or failed RV Screen Door Handle installations that I had to do something. I modeled the channel of the screen door so that 3d printed part can be used to elevate the position and the allow a…
- Downloads
- 19
- Likes
- 9
- Rating
- 0
P
PrintablesJEBurroughs
Sim Racing Magnetic Paddle Shifters
I designed my own Wheel Button box and I looked at other designs and tried to improov or make it my style from their concepts. I Used TPU to print the paddles and they are awesome. No Supports and 40 or more infill. Shifters are same…
- Downloads
- 17
- Likes
- 3
- Rating
- 0
P
PrintablesJEBurroughs
RV Extended Grab Handle Main Entrance TPU Door Bumper
I have a Grand Design Transcend Xplor 240 ML and installed an Onnais Electronic Main Entrance Lock. When I place the extended grab handle in the travel or closed position it was touching the #3 on the keypad. I made this bumper block to…
- Downloads
- 16
- Likes
- 2
- Rating
- 0
P
PrintablesJEBurroughs
40mm Fan Clip mount for X Stepper Motor and Extruder Motor
Very basic clip on mount for cooling the X Axis and Extruder Motors with 40mm Fans. Can be assembled in various way for your convenience. Category: 3D Printer Accessories
- Downloads
- 15
- Likes
- 4
- Rating
- 0
P
PrintablesJEBurroughs
12mm Mag Paddles with Joystick addon for Sim Gear Shifters
This is for many of the same style wheel mounted paddle gear shifters. However I did specifically make them for my Magnetic shifters found here… https://www.printables.com/model/487560-sim-racing-magnetic-paddle-shifters This mod…
- Downloads
- 14
- Likes
- 1
- Rating
- 0
P
PrintablesJEBurroughs
Linear Rail Direct Extruder Drive MOD for my Center mounted BLTouch FANG Duct System
UPDATE: 2/5/2023 I apologize for uploading the wrong part EnderV2_X_Limit_Motor_Mount_V3. This has been fixed and the new file is EnderV2_X_Limit_Motor_Mount_V4.stl Please use this file. I have paired All my mods together to create these…
- Downloads
- 13
- Likes
- 1
- Rating
- 0
P
PrintablesJEBurroughs
CAPART Chest Mount Stand Holder for DJI RC/RC 2 Controller USB C Extension Access with a right angle addon.
CAPART Chest Mount Stand Holder for DJI RC/RC 2 Controller USB C Extension Access. This allows for access to the USB C and Memory Slot while using the CAPART Chest Mount Stand Holder for DJI RC/RC 2. It also has a dongle that closes the…
- Downloads
- 12
- Likes
- 2
- Rating
- 0
P
PrintablesJEBurroughs
iFoo Wireless HDMI Extender H2 pro 90 DEGREE Magnetic Stand
I made this so I could use a 90 degree HDMI adapter on the H2 pro. The adapter exits on the top so I needed to turn the H2 Pro sideways. I am shooting at my computer that is across the room, and this angle allows for a clean cable…
- Downloads
- 12
- Likes
- 0
- Rating
- 0
P
PrintablesJEBurroughs
DJI RCN1/2/3 controller Antenna Booster Protector
Two simple prints to help support and protect the addon antenna booster for the DJI RCN-1/2/3 controllers and the Parabolic Antenna Booster. https://www.amazon.com/dp/B0939YVFZB?ref=ppx_yo2ov_dt_b_fed_asin_title
- Downloads
- 10
- Likes
- 0
- Rating
- 0
P
PrintablesJEBurroughs
ROBO TABLET STAND
UPDATE: New Studs, make sure you print them flat with 90degree support. Brace addon kit the add stability. Kit also includes a removable cross brace for the rear foot. Added a Support_Uni file that will replace the single supports and…
- Downloads
- 9
- Likes
- 1
- Rating
- 0
P
PrintablesJEBurroughs
Pneumatic Fitting Tubing Brake for 3D Printers
1/22/2022 UPDATE: Added support for the PC4-M6 that is on some extruders. -------------------------------------------First Upload--------------------------------------------------------------------- Searched here, and around the web, and…
- Downloads
- 9
- Likes
- 0
- Rating
- 0
P
PrintablesJEBurroughs
Generic Extruder Handle for hand mobility impaired users
Never even thought of it until I was looking at my post, but I could have just made an insert for the original Handle. SO... I did just now... \\\\\\\\\\\\\\\\\\\\\\\\\\\\\ I made this version to work with a simple 3mm hex head metric…
- Downloads
- 8
- Likes
- 1
- Rating
- 0
P
PrintablesJEBurroughs
Adapter to convert CAPART RC2 Vest Support Lanyard mounts to RC-N Style Controllers
This allows the DJI RC-N1,2, and 3 style controllers to to attached to the mount originally meant to hold the RC2 controller. Could be used for any other purpose requiring the 4mm holes and spacing that the original DJI RC2 has. I found…
- Downloads
- 6
- Likes
- 1
- Rating
- 0
These are all currently available results.