Counting matching models…
If you have solar panels on a flat roof and the panels are less then 15 degrees mounted, some water will stay in the lower edge of the panel. After some time your panel become dirty in the lower part and it reduces photovoltaic panel…
Sensor holder for Xiaomi Aqara Temperature sensor. You can get it easy out for battery change.You can stick it to the wall or use some screws. I printed with ABS. If you print with PLA there can be some space between sensor and case…
Clamp for connecting DS18B20 to 15 or 22 mm pipe. Used for temperature measuring heating radiator. Best to print with ABS or PETG because of temperature used for the heater. Category: Electronics
Holder / case for Xiaomi (V2) Aqara Door sensor and magnet. For the V1 (round) version, see https://www.thingiverse.com/thing:2791484 . You can get it easy out for battery change. You can stick it to the wall or use some screws. I printed…
Nozzle for vacuum cleaner Electrolux Ultra Silencer ZUSG3901. I made also another one for computer cleaning with a hose. See https://www.thingiverse.com/thing:2739851 Category: Household Supplies
An enclosure/case for a Sonoff 4CH Pro R2. Below the sonoff there is some room for wires or/and Screw Terminal Blocks. The walls are 3mm thick. I have used m3 Brass insert nut Injection Molding from…
This is a replacement cap for a Bosch AKE 35-19S chainsaw oil tank. It will probably fit other models too. The size of the thread is M36 but I have adjusted it because because the depth is less then normally for M36. Depending on you…
Actuator (plastic lever) for strimmer Black & Decker for GL280, GL30, GL301, GL340, GL420XC, GL423, GL425SC, GL530, GL540, GL544, GL545, GL550, GL555XC, GL560, GL560PXC, GL570, GL570C, GL580, GL580C, GLC13, GLC14, GLC120, GLC2000,…
Pipe clamp to connect a 25mm pipe to another 25mm pipe. Used for a pipe with a solar panel on a boat. You can connect 2 vertical pipes (see photo) or one vertical and horizontal pipe together. For last one, just turn 2 pieces 90 degrees.…
Bracker for a linear actuator with diameter of about 20 mm. I use it for this one…
It is a motorized camera slider. See https://www.youtube.com/watch?v=Xh0SBud-Cfs . First the slider is running on slowest speed, then full speed and slowest speed again. I used the original thing as an example but changed a lot. You can…
Holder for Xiaomi Aqara Switch. You can get it easy out for battery change. You can stick it to the wall or use some screws. I printed with ABS. If you print with PLA there can be some space between sensor and case because of the less…
This is a vacuum hose adapter for DeWalt airlock systeem. On my DeWalt DWE315KT multitool it replaces the dwv9000-xj adaptor. Maybe it will fit also other DeWalt tools. It is for hose 32 mm. The diameter on the DeWalt adaptor on my…
Sensor holder for Unimag Itron watermeter. It is for a 12mm inductive proximity sensor(12A3-4-Z/BX-5V). I printed it with PETG. I'am still testing, my sensor is NOT working at this moment in my case. I have also added a sensor holder for…
Customized version of http://www.thingiverse.com/thing:38819 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=38819 Instructions Using the following options: $fn = 35 cableHoleDiameter = 5 catchHeight = 1…
Filter for a rain barrel. It is about 7 cm width and 6.5 cm high. It will fit on a rain barrel with a pipe which needs M27 nut. I used a part of a pantyhose to create a filter. Just a knot below and the other part is folded inside and…
My Bakeey P15 Sport Foldable Bluetooth 4.0 Headphone was broken at the head band. Just where it can be folded. With this part and some glue it can be repaired. You have to use 2 of these parts. Print Settings Printer Brand: Prusa Printer:…
Holder / case for Xiaomi WXKG02LM Aqara Smart Light Switch Wireless Version. I think it will also fit the single switch if its dimensions are the same. You can get it easy out for battery change. You can stick it to the wall or use some…
Tool used to disconnect male and female MC4 connections which are use with solarpanels Category: Electronics
Hose adapter for vacuum cleaner Electrolux Ultra Silencer ZUSG3901. You can use this to clean your computer (small places). You can use it with a hose of 12 outside diameter. Warning: don't use it to long because your vacuum cleaner will…
This is an airfilter for an Atlantic Explorer WPB v3 or v4. But it kan be used for others with an intake of 160mm (outside diameter). The top and bottom can be clicked together. Maybe you have to sand down the 4 lips at the top part a…
Raspberry pi Zero (W) case with camera. Holes for 2 x usb, hdmi and SD card. I also added another bottom cover (V3) with additional parts which can be mounted on a P3STEEL prusa printer. You can use a combination of the parts you like. I…
This is a remix of http://www.thingiverse.com/thing:532424 My part touching the ground of the P3Steel front and back plate was a little bit smaller (about 25mm). Also the original one could move freely. I made it more tight, so it won't…
This is an adapter from a Busch Jaeger wall switch to 3 Philips Hue dimmers. You can use double-sided tape to put it on the wall switch. There are magnets (2 per dimmer) at the back of the adapter. I have used Neodymium magnet 10x2mm.…
A tool to make a fillet with epoxy. The first one is 25mm. I added one with 15 mm. The pictures are from the 25 mm. Category: Hand Tools
This will lock the spool holder rod in place. The rod will easily fell off. Made for PS3Steel from HTA3D. It will click in place. Mirror the part with the slicer software before printing for the second one. Category: 3D Printer Accessories
These are all currently available results.
