116 models
This is version 2 of the TCD (Trading Card Dispenser) I found that at a recent event, taking out the card dispenser, meant having to disconnect the motor plug, then removing the whole unit & then using the rear slot to reload the cards,…
Just creating items for Star Wars themed props. Base diameter = 42mm Height = 16mm Print Settings Printer Brand: TEVO Printer: Tarantula Rafts: Doesn't Matter Supports: Doesn't Matter Resolution: 0.15 Infill: 20 Filament: filament PLA any…
2023 myself and family finally made it to Galaxys Edge! The first ride was The Rise of the Resistance, and on walking though the queue, I noticed some great props and fixtures. This lamp was one of them. I placed a popcorn bucket next to…
Design up this 'panel' based on Star Wars theme. It can be displayed in any orientation that you want, there's no up or down. Print Settings Printer Brand: TEVO Printer: Tarantula Rafts: Doesn't Matter Supports: Yes Resolution: 0.1-0.4…
I found these cartons that look great as something that could be used on a panel as a greeble, doesn't have to be Sci-Fi related, but also military etc. The carton is formed so has angled sides for release from it's mold. Hollowed out the…
Just another greeblie panel that I created and used on my GOUD-4 messenger droid
This vained panel was inspired by one on a backpack from Star Wars. There is no specific size, so I choose these that could be printed on a small bed printer. Print Settings Printer Brand: TEVO Printer: Tarantula Rafts: No Supports: No…
R5-D4 Funko Pop I used my own R5-D4 pop for dimensions to be able to 3D print my own alternative versions of the droids seen in the TV shows & films. These are not the bobble head versions though, I did design a version, but as most…
Similar design to other ‘disc’ node. drawn up in 2020.
This screen fits behind an astromech's utility arms. I designed this to house the TCD with a slot for the cards to come out of. This model is the ‘solid’ version I created for the upper utility arm socket. I have included the greeblies…
This has an additional component that I have taken from another project, to spruce up this model.
A Star Wars inspired display screen/panel. This is version 1 of 4, some with fake buttons, some without so that you can add your own. And version 4 which is just a small display surround.
These were originally drawn up as seperate pieces, but were then all placed onto the fake electronics board for use on R4's dome panel. Plus some other pieces that I had planned to fit LED's behind, again, all part of original plan for…
The Treadwell Droid has a claw utility arm. The found prop is an ice cube grabber. These are still available to buy, but I wanted to 3D draw it up to see if it would work. I drew the two pain components, the claw body and the actual…
Another ‘power block’, has fins for ‘cooling’ two lower holes for cable/pipe feeds.
Following on from my first panel, this one is a more simpler design. I've another version of this, without the front vain's. This can be mounted in any orientation you require. It has a hollow rear for electronic components for LED's if…
Drew this up a few years back as something to do. These are worn by travellers leaving Corellia in the film Solo a Star Wars story. They can be seen in the accompanying visual directory book.
another panel design, this ones from 2017
Was bored so drew up another panel greeblie. Sort of Star Wars inspired, but also just Sci-Fi looking. Recessed rear for electronics/same print material.
Continuing on from the other pipe work, here's another. please share your project below, thanks
Made these last minute for a work college how mentioned he was going to a fancy dress party as Frankenstein. I joked about him having neck bolts but said he didn’t have any. So I quickly drew these up and printed them out. The magnets…
Not Star Wars related.....well....I suppose it could be :D Just for fun. This 'vent' was drawn up for an air cooler for my daughters room. It has four location holes for mini cable ties. [tub with ice in, a fan and 'vent' = cooler air].…
This 'fake' electonics board was created from smaller 3D pieces. It was created for the side panels of my R4-D4 Astromech's dome. I'll post up these smaller pieces. Print Settings Rafts: Doesn't Matter Resolution: 0.2 Infill: solid…
Following on from drawing up the R5-D4, I was asked if I could do an R2 version. The body is the version I had drawn up for R5 and the R2 dome, was roughly dimensioned up from the original version, but with better details for a more…
Just a light shade inspired by Star Wars. I've included the stp file.
This is a slightly modified version of the Greeblie B , see here . Thought I'd make a version that could be linked together to form a longer part. I have included two ' end cap' versions as well, one flush and one longer.
The droid you've all been waiting for, R5-D4 in three (3) leg mode……. Based on the Funkopop, hand measured and created in 3D AutoCAD Inventor, R5 has more defined details than the original Funko. He also now has my own designed centre leg…
A Star Wars inspired display screen/panel. This is version 3 of 4, this version has an additional section below the screen surround.
Wanted a specific size of honeycombed screen for PSI's to be installed in an R2-D2 dome. The holder it fits into can be found here: https://www.thingiverse.com/thing:4506665 Created by Vass88 Print Settings Printer Brand: TEVO Printer:…
This version I didn't use on my GOUD-4 messenger droid, just two of Panel 1.
This is a recreation of a prop found in the Solo a Star Wars Story visual directory book. It's been drawn up in two halfs so that electronics can be fitted. There are two front panel options, one WITH a non functioning keypad, one without…
I planned on building an MSE droid, from Star Wars, years ago. This got shelved, then Solo a Star Wars Story came out and along with it GOUD-4 (mouse droid) appeared too. Already a member of the Mouse Droid forum, I found 'Daleacre' had…
This is version 4 of 4, this is just a small display surround.
A Star Wars inspired display screen/panel. This is version 2 of 4, without fake buttons so that you can add your own. Version 4 which is just a small display surround.
Another 'control panel', a WIP as I wanted to make the buttons tactile enough to operate micro switches behind them.
Designed this up to hold a Teeces board for R2-D2's PSI dome lights. This, along with the honycomb screen, were designed to fit inside this item: https://www.thingiverse.com/thing:4506665 By Vass88 Print Settings Printer Brand: TEVO…
This was the second 'Bulb' holder idea I had. Slight changes compared to the first Print Settings Printer Brand: TEVO Printer: Tarantula Rafts: Doesn't Matter Supports: Doesn't Matter Resolution: 0.15 Infill: depends on screen opacity…
designed to hold an LED in place.
My own design for a ‘power node’, designed back in 2020 Uploading all my designs.
This is R6-LE5 or Les lol, the model is based on my original three legged body and I created the R6 dome to follow the similar designs of the Funko's. Included is a free GA drawing that can be printed off. These were available for a time…
Thought I'd create a Y splitter fitting to distribute the smoke better. Two pipe tubes can be attached to different locations. The holes are dia 6.3, after printing tho the hole is only dia 5.23 The tube I'm using is dia 6.25 My tube is a…
Just freestyling ideas using models I already have. If you'd like me to create anything from what I already have, drop me a message and I'll see what I can do.
This is the two coin display stand for the 2016 & 2023 Droid Builders coins from Celebration Europe.
Designed to fit this relay switch, purchased off eBay. Print Settings Printer Brand: Ultimaker Printer: S5 Rafts: No Supports: Yes Resolution: 0.1 Infill: 50% plus Filament: filament PLA any How I Designed This ===================…
This is a non-cannon created item to cover over the screw holes in the wood panel to secure R4-D4's Holo Projector in place. Print Settings Rafts: No Supports: No Resolution: 0.2 or less Infill: 50-90% Filament: filament PLA Notes: I used…
Two pipes, one with one without a top ridge, part of another project, but thought I'd share them as they are.
OpenR2 shows that the eye pieces used are more than likely a component found on a Michell & Transcriptor Turntable. See pictures & link: https://audiogold.co.uk/product/michell-transcriptor/ There are other items on these decks that were…
Was asked to draw up a ‘flexible’ looking hose. After following a youtube video, I was then able to reproduce this in AutoCAD Inventor. See other post for 90 deg adaptors.
This is a four way splitter for connecting tubes to for venting smoke/vape.
This was not created by a scanner, but by measuring the original by hand and then drawing it up in AutoCAD. This took several hours to complete & is missing one hole near the light square opening. The project was for a You Tuber.
Wanted a box to house the ‘timer delay off’ circuit board for mounting it in my garage. This design allows the the box to be fitted in place and then the circuit board can be fitted inside after wires are connected. I wanted a LED light…
Designed these brackets for my vintage Schumacher SST Sport RC. One end is for the battery to slid into, the other is a clip form. Print Settings Printer Brand: TEVO Printer: Tarantula Rafts: No Supports: No Resolution: 0.2 Infill: 20% to…
Design is slightly different to the 1st. The inner section protrudes out more. please share your project below, thanks
Due to some people having issues with sourcing the correct spring etc. I thought I'd have a go at drawing and printing a 3D spring version. SPRING print settings that I used: 25% infill, wall thickness 1.4 & print inside to outside with…
After drawing up R5-D4 to be able to create the R5 droids that FUNKO haven’t produced, I needed to draw up an R4 dome version, for my own built droid. There are two models, split into two half's [front & rear] and a whole version. +++…
Here is just the Block with back plate, for you to be able to create your own carbon frozen figure. To create the carbonite effect, I just used PVA glue mixed with model paint, it takes a while to dry, but enough time to add texture to it.
Design based along the lines of R2-D2, but for a single vent. Included is a rear backing ‘ring’ to help secure in place.
Based on R2-D2's octagon port, but with a twist, based on a design sketch by Jake Lunt Davis [credit]. This was designed to be fitted externally to the body, with the inclusion of a curved rear surface. This version has a flat back for…
control panel indicator display [bottom]
I've been interested in R5 since first researching him before my build of a full scale droid. I have owned a DJ Design resin one since day one as this was the only available way to have one back then. I modified it to better suit my…
This R5 has the extra holoprojector that was intended to be used in the film, to show Han Solo the join up and see the galaxy holo video. R5-PHT was also a Disney Droid Factory set. This is a 3 legged version of the Funko.
Three legged Funko Pop astromech, version not created by Funko, so I did it myself. It's designation is based on my R5-D4 converted into an R4 astromech. I've also included a PDF drawing of the R4 Funko.
Drew these up to keep RC servo leads tidy inside R5's body.
GONK droid - designed by Jake Lunt Davies. Drawn up as a 3D model.
Drew this up for a friend who built a M5-BZ droid from the TV Clone Wars animation. I split this into two half's to achieve a good finish, less clean up. He renamed him KN-B1 after his late father.…
I built an R4 type dome to mount on R5's body. I have heard lots over the years about kids twisting the Holo projectors and causing damage to the wires that connect up the LED's. There are more sophisticated designs, but I drew this one…
I drew these up ages ago, before actually thinking that someone might have already designed up a holder lol. But most are fitted into panels or enclosures. So these, designed to be mounted onto face panels, are different. The digital volt…
After I had drawn up my R5 Funko [soon to be added to my models] I thought it would be cool to do a carbonite version. One of the 3D model version I created for easy printing, was half sections, front and back, to look like the original…
This boxes houses my servo tester as well as a voltage regulator, to drop the power down from 12volts. I found this handy for my work bench power supply, also I could use a mini 12volt battery if out at an event. [This gives me an new…
Idea by Mike B, based on R2-D2's octagon port, but with a twist, based on a design sketch by Jake Lunt Davis [credit]. This was designed to be fitted externally to the body, with the inclusion of a curved rear surface. This modified…
This is the second version I drew up after not being able to get hold of the same remote control unit. I have two, one for the trading card dispenser activation and the second, for R5's ‘Bad Motivator’ activation. There is a requirement…
designed to hold a Flysky FS Sr8 receiver in place
I drew these up ages ago, before actually thinking that someone might have already designed up a holder lol. But most are fitted into panels or enclosures. So these, designed to be mounted onto face panels, are different. The digital volt…
Drawn up and 3D printed in ABS as a Lid/Panel support. My WED-15-77 droid's main body is wood construction, I needed a support for it's panels. Does what it says on the tin lol.
Was excited to see R5 appear in The Mandalorian, season 2 episode and even more so when he actually participated in his scene. Then when his holoprojector popped up.....I was disappointed that it wasn’t visible on screen for long enough…
This is the open design, version 4. Version 3 is still a work in progress. please share your projects below, thanks
We were attending a wedding and R2 was requested to hold onto the rings. So I drew up this box to hold them in. The plan was to have the lid remotely activated, but time was short. Maybe version 2. The pictures are for the finished item…
Back in 1977 when Star Wars was just Star Wars, some of the droids were operated by using Futaba radio control transmitters. This I found out whilst looking for info to build my own. After tracking down the model, possible two versions, I…
Based off my own project, I decided to create this FunkoPOP styled version. Over sized head, detailed utility arms , baby antenna, simplified, yet undeniably Treadwell‘s WED-15 droid. Version 3C is the latest update, mostly working on the…
I wanted a housing for the Syren 10 dome motor controller board. Just to add some protection to it. My first design, was good, but needed to re-position the openings a bit. The dip switch & LED openings needed adjusting. The second print,…
Star Wars Andor season 2 TV show, published a promotional magazine, called 'Rebelion an ANDOR zine'. In it was a page of 'micro-props' that I liked the look of so have recreated them to be 3D printable. I have allowed for M3 knurled brass…
I drew this up a few years ago, trying out ideas. It's hollow and the intention was to fit a large 10mm LED inside it. Print Settings Printer Brand: TEVO Printer: Tarantula Rafts: Doesn't Matter Supports: Yes Resolution: 0.15 Infill:…
This was drawn up back in 2021, but forgot I had him frozen in carbonite lol As with the other's, this was design to fit on the standard Funko base.
Wanted a way to display these two coins. The holes are a nice fit and don't damage them. The recessed hole allows for the coin to be partially viewed from the rear and also pushed out to be rotated to display the other side. Top hole…
This is version 1, I drew up to hold my remote control unit for R5's ‘Bad Motivator’ activation. There is a requirement for an M3 brass knurled threaded insert. This is to secure the front panel in place. Blog link here: remote…
Part of my strap designing, I had the idea of this being printed in TPU. It worked great as a 'hinge' to keep a storage box from getting misplaced.
This is the bracket I designed up to fit inside and behind my R5's utility arm socket. This includes a curved front so that it sits as far forward as possible and butts up against the screen, also included.
This version is for a single vertical card. It's a slightly different design as it didn't now have the angled side support, so I added to semi-circles to the rear to add as support. It just has the film title 'Solo'. Notes: I've not…
As with the others, this is a five pin display stand Print Settings Printer Brand: TEVO Printer: Tarantula Rafts: Doesn't Matter Supports: Yes Resolution: 0.1 Infill: 20% to 100% Filament: filament PLA any Notes: depending on orientation,…
This was my original idea for this panel, not just for your car but for your tool box or other wheeled transport. This was the fancy round version, I later did the more traditional square one.
Star Wars Andor season 2 TV show, published a promotional magazine, called 'Rebelion an ANDOR zine'. In it was a page of 'micro-props' that I liked the look of so have recreated them to be 3D printable. Original design & credit goes to…
This is my own designed version to suit R2-D2 FunkoPOP in three-leg-mode. It's a bit taller than a two-leg one, due to the angle etc needed to mis R2's dome. I have drawn up a tray with lipped edge glass holders, plus the option of having…
I designed this bracket to hold a mini air pump, which is connected to the e-Cig 'smoke adapter'. There is a countersunk hole to fix it with. Print Settings Printer: IdeaWerk Rafts: Yes Supports: Yes Resolution: 0.2 Infill: solid…
Created as part of a club display, featuring the three main social's used by the club. This will need to be scaled down in size to fit on a small printer lol, didn't realise it's size.
R5-D4 head with motivator - originally designed for the Little Bits Toy back in 2018.
This is the new housing for the electronics for the Trading Card Dispenser. The additional image shows the components fitted inside. This was the second base unit as the second batch of remote control boards was a different dimension, so…
These won't eliminate wind noise totally, but they do help reduce it to a less annoying sound. This is whilst driving without music on and above 50mph [motorway driving]. There are two files, depending on print orientation, the half…
The display stand for Trading Cards, created by Vic Matos: https://www.thingiverse.com/thing:2885545 There are three files, but two versions. These have a flat back (no location tab) for preference installation onto the stand. Version 1:…
![Node Greeblie [v2]](https://media.printables.com/media/prints/952848/images/7268938_a510c994-9bcc-42ae-b767-75ca8701d7bd_78f9ac1b-54ba-4f1d-93bf-4270d8dd7181/part4b.jpg)
![Control Display panel 4 [SMALL]](https://media.printables.com/media/prints/256619/images/2300919_6ad5b7af-718e-43bb-a487-044436d9dcde/control-panel-display-4-small-screen-buttons.jpg)
![control panel indicator display [bottom]](https://media.printables.com/media/prints/946886/images/7228627_d3a631e8-fb5e-4b06-93a8-63de6052ce7e_beaf151c-73b0-44e1-9696-02190aaeb666/ct1.jpg)
![R5-D4 Bad Motivator [screen accurate as possible]](https://media.printables.com/media/prints/707657/images/6846957_df32764a-2ea4-4490-b731-7111d121f16d_053b639b-5b55-42d3-b98e-7b97b4e4f4d5/bad-motivator-film-accurate-2022-view.jpeg)
![Cable clamps [4 off small]](https://media.printables.com/media/prints/470659/images/3855991_7d3425d4-e73b-444e-a860-8bf03aef23e3/cableclamp.jpg)
![Remote control wristband holder [2 button] V1](https://media.printables.com/media/prints/281613/images/2493227_d6a4ce27-ef7c-4b92-a526-9c7633aa57d9/wrist-comms-v1.jpg)
![TCD bracket [curved] & Utility Arm socket screen](https://media.printables.com/media/prints/484214/images/3955088_51781a11-156e-443f-a229-69a5c5491405/tcd-cartridge-assembly-2022-curved.jpg)
