Counting matching models…
Important: This fits only the GbE Version, also called: USW-Flex-Mini This is a simplified version of the unifi usw flex wallmount. It is simplfified for easier printing. Print on the flat side! (mounting holes touching the print plate)…
This is a simple kitchen cutting board holder. It fits 2 20mm and 2 10mm cutting boards. It has a feet on the backside, so it doesn't tip over when the boards are fitted upright. I have used 0.3mm layer height, 20% infill and PLA
Update 05.06.2025 I changed my hotend to a Rapido Ace, which is the shorter HF Version. So I had to modifiy the mount for it. I designed shorter version which has to be used with my modified BTT Slim Case…
This is remix of a Case for a NAS Build with the Odroid H2/2+/3/3+ Boards I added new HDD rails with vibration dampening. The rails consist of two parts the rail shell is of PLA/PETG the rail inserts are TPU There are two different rails…
This is the prototype of the improved version of the Orbiter Filament cutter, which is based on the Sherpamini cutter. I reduced the play in the mechanism and designed a better support for the lever. I tested the function of the cutter by…
This are replacement feets for a Lenovo Ideapad S340 Notebook. They may fit on other Lenovo Models Printed in TPU
Praying Mantis is a complete Printhead for the following configuration: Sherpa Mini Extruder V6 Volcano Hotend 40mm Hotend Fan 5010 Part Cooling Fan BLtouch Sensor I did this Remix because the original Mantis was a much to complicated…
Completely new designed Silca Container for the IKEA 365 Box. I made the overhangs a lot easier to print, designed a new lid to clip on. I tested different print settings and found the best one for use: - crosshatch Infill @ 20% - 6 walls…
This is a powersupply holder to mount the stock PSU after upgrading the printer to dual Z-axis. It is designed to print without any supports, just place the walls upwards (see picture)
Modular mini shelf that can be easily assembled using screws and press-fit nuts. Since I couldn't find anything suitable, I designed this for my kitchen cabinets. All measurements are in millimeters. Update 06/2026 added Wall Type B I…
I modified the BTT Eddy slim Shell, to better fit it on a Chaoticlab Tap V2. It replaces the original case. shortened the case made it slimmer added supports for the bottom board of the eddy removed the pocket for the screw heads You can…
This is an easy removable and easy to clean dustfilter for a 92mm fan you can glue an nylon filter to the inner frame you can pause the print (at layer 9 or so) an lay a nylon filtermat on the print and resume the print. I used the second…
Update 03/2025 Sorry I forget to describe I had a Spigen Thin Fit Case on the phone. It only fits properly with this case. This is a remix of the cd slot iPhone holder für the mercedes benz C-Class (w204). I made a completely new holder…
This are for vibration dampening. You can mount them with adhesive tape on the back side of your flagstone or concrete slab. Settings: Infill: 30% Grid Supports: Yes Material: PETG / PLA Hint: print on the sqare side with supports
This are new feet printet in TPU for the IKEA Nisse Chair. https://www.ikea.com/at/en/p/nisse-folding-chair-black-30115066/ The original feet are very small and can damage the floor or break off! So I designed this larger ones, that can…
This Mount for the BLtouch (and clones) fits on the X-Enstop. With this Mount, the BLtouch is mounted as right side as possible, on the X-Endstop Position. The height has a little more clearance then needed, so it is possible to use…
You can print it either way, flat side or the other way around. Supports are needed for both options. See pictures Printed in PLA with following Settings: 2 walls 5 Top layers 5 Bottom layers 20% infill 0,2mm layer height normal supports
This is a Board Mount/Holder for mounting the BIGTREETECH Octopus Board on Anycubic Mega Zero (2.0), SE and other Ender like clones I've designed it in two parts: Board Mount Spacer Plate So it is easier to adapt to different printer…
I made this to mount the Anmite 14" Portable Display with its VESA 75 to the Tablet Holfer Hinge of the Small Multifunction Arm System. The holder offers enough space so that the screw can still be turned without any problems. You can use…
This is my Modular Magnetic Wrist Rest I designed for my mechanical keyboard. Its made out of PLA with 6x2mm Magnets. So it is adjustable for the most mechanical keyboards. It holds together with this magnets and also attaches to the…
This is a vibration damper for a Titan Extruder on the Anycubic i3 Mega. I changed the orientation of the extruder, so it is easier to feed filament. The extruder gets mounted with M4 screws and nuts to the struts of this damper. Print…
I created this insert after realizing that the cables could scratch the display. I also experienced several cases where the oscilloscope turned itself on while in my bag because one of the cables was pressing on the power button. The…
I created this adapter to mount a tablet wall mount to the multifunction arm. The M4 holes in the plate are spaced 40mm apart and have a countersink for the head of an SHCS screw. I used this wall mount, but others should also fit:…
This is a SSD Holder/Mount for the Vullers-Tech Raspberry Pi Case. It is an old design from me, but it works well. It has a slottet hole at the end, to ensure a good fit for the SSD. Print Settings: no supports 0.3 Resolution 15% Infill PLA
These are all currently available results.
