Counting matching models…
This is a 2.5 to 1 ratio worm gear in a frame. It uses 3 mm bolts to hold it together. It uses 4 mm threaded rod and nuts for the drive shafts. Print Settings Supports: No Resolution: 0.2 Infill: 15 Notes: All the parts are oriented for…
It will print without supports. Mostly.
Simple spring that won't move around like a metal coil spring. Use the one appropriate to the filament you use. Turn the spring on its side to print for a better flex. Start with version 1, if it is too stiff, try the next version. Print…
Teensyduino 4.0 Dimensionally Accurate with Largest Components. I tweaked an existing model that was not available in STL format. The PCB and components are dimensionally accurate and placed within .25 mm.
I didn't want to tape the camera mount to the wall, screws are preferred. So I made a slide-in base for the camera mount. I modified the camera holder to have a tapered front to slide in easier. The short mounting post fits into the holder.
A spacer for the i3 / MK10 hot end cooling fan that won't fall out when you re-assemble. It replaces the two cylinders. It has a connecting bar that slips between the bottom two cooling fins. Supports: No Resolution: 0.2 Infill: 100 %
Complete Frame Mounting System for the i3 / Duplicator style of 3d printer. There is no drilling required. It eliminates the separate power box and the wiring umbilical cord. It improves the frame rigidness considerably. It adds 60 mm…
Dual spool roller using 60822 bearings. It fits the two common spool widths - 5.5 and 7.5 cm. The required number of each part is in the "PrintReady" version stl files. If you want to print them differently, the individual parts are also…
A set of screw holes from 3.2 mm to 3.6 mm for your projects. Import and set to subtract to use. There is a test print so you can determine which screw hole size works best for your printer and material use. Print Settings Rafts: Doesn't…
This is an X carriage for the Prusa i3 MK2 hot end that works with the Duplicator Frame Mount System - https://www.prusaprinters.org/prints/141358-i3-frame-mounting-system-major-mod-to-i3-duplicato A1 and A2 go together with 2 20mm long 3…
This is a snap on OR bolt on frame for the i3 v2.0 OR i3 v2.1 (MK10 hot end) to mount a 60 mm OR 40 mm fan, that goes on the back of the X axis carriage. It is modular for printing ease and simple changing of the fan / duct. UPDATE - I…
Simple tools to hold 3 mm bolt nuts in place for the i3 / duplicator style frame. It holds 2 or 4 nuts in the needed pattern to match the bolt holes in the frame. The 4 square is for the front bolt pattern at the top of the frame…
This is a 60 mm axial fan duct that holds a 6 mm USB camera that fits the i3 v2.0 OR v2.1 Rear Mount Cooling Fan Frame [ https://www.prusaprinters.org/prints/141368-i3-v20-or-v21-rear-mount-cooling-fan-frame-for-60- ]. This is the camera…
These are all currently available results.
