Counting matching models…
I have two Skadis pegboards on a closet door, held from the top by screws and wooden brackets. Mounted just like that, the brackets and the Skadis would swing as I would close/open the door. So I created these spacers, screwed them to the…
Made to match the Scan the World scan of Nanni's complaint tablet to Ea-nāṣir hosted on SketchFab . So that it may have a dignified home. In retrospect the hollow part in the “arms” at the bottom are probably not worth the printing…
Holds a Leatherman Wave multitool on a Skadis. Attaches to the Skadis with 2x 2.5 mm Skadis T-nuts . Materials & assembly Pick whether you want to use 1 or 2 T-nuts for mounting. 1 T-nut worked just fine for me but 2 would add some extra…
Dimensions are: 36 mm wide, about 31 mm “thick” (in axis perpendicular to the pegboard, 72 mm max height. height of "bottom of dispensing cutout is about 41 mm. The toothpicks I designed this around are about 6 cm long. Made for the…
Simple thingie for holding a container of tip tinner on Skadis, specifically Thermaltronics TMT-TC-2 Tip Tinner in 0.8oz (20 gram). On Amazon, ASIN B00NS4J6BY . You will need: 1x this model 1x Skadis T-nut , 2.5 mm variant 1x M2.5 hex nut…
Backstory I wanted to have some things easily grabbably reachable while in bed, e.g. bluetooth keyboard for watching movies from bed. So I decided to attach a Skadis to the side of my nightstand. Model This mount attaches into the right…
Skadis holder for IGAN-P6 side cutters ($7 on Amazon ). Holds the side cutters in a natural open position so as to not wear out the spring. Cutters can be easily picked up from the middle. Prerequisites 1x M2.5 countersunk machine screw…
Besides this model, you'll also need 1x CSD_Salzburg's "Universal Hook" to attach it to the Skadis. I've printed mine with PLA at default OrcaSlicer settings (3 wall loops, 15% infill density) on a Elegoo Neptune 4 Pro. Unfortunately…
I wanted to attach a webcam via the cool articulating system to an IKEA Bror. Bror comes with regular mounting points. Normally those are for fixing shelves and joining together adjacent Bror columns, but you can also slide on 3D printed…
Made to hold this scriber I got from McMaster-Carr: https://www.mcmaster.com/catalog/6808A11 Attached with a Skadis universal hook (originally made by CSD_Salzburg), get one from…
I bought this webcam off Amazon for watching my 3D printer: B08VJ25PL1 The Internet given the camera's USB ID (32e6:9221) says the vendor is “icSpring”. The stand it's embedded in comes with a threaded camera screw hole, but I didn't like…
I wanted to put an IKEA Styrbar smart home remote on a pegboard. I didn't like that the holders I found, so I made my own. There are 2 versions: V1: minimal, just a thin horizontal print V2 ( recommended ): bigger, rounded rectangle I…
These are all currently available results.
