Counting matching models…
The Model Y has a spot under the main display for two phones, but mine doesn't have a pass-through for a charging cable. If I plug a charging cable into the phone, the phone will no longer sit in its designated spot, and slides all over…
I made this for my son who is pursuing his private pilot's license. It is designed to strap to your thigh and holds an iPad Mini 6, allowing it to tilt to several positions. Assembly Notes: For ease of printing, the frame is in two parts…
This is a replacement door striker for a number of Frigidaire and other brand clothes washer doors. I accidentally broke the one on my washer, and modeled this one as a replacement. Category: Replacement Parts
This is a duct and mount for a 120mm fan, to provide broad/gentle part cooling for the Seckit SK-Tank. The idea is that for certain parts, the regular part cooling fans can't cool some places sufficiently because the print head is moving…
This is an adjustable mount for the dock for a Euclid Z probe , to fit on the Seckit SK-Tank. The bracket attaches to the underside of a Y brace*, the tray attaches to the bracket, and the dock itself attaches to the tray. The dock shown…
This is a mount for dual 80mm fans, to cool up to four Corsair Vengeance LPX DDR4 memory modules. I was having problems maintaining stable operation with my RAM overclocked to 3200 MHz, and I had a couple of Arctic F8 fans lying around,…
This is a PC desktop with stylistic touches reminiscent of a cockpit. It is designed to fit on the VIVO DESK-V102E standing desk frame and may require some modification to work with another frame. This desk was featured with the rest of…
This is a replacement SecKit SK-Tank mount for a BMG and CF gantry, with dual 5015 radial/blower fans for part cooling, and a ducted axial 30mm (3010, 3015, or 3020) fan for hotend cooling. The same mount supports the Dragon HF, E3D V6,…
This is a mount for the Bondtech LGX and Phaetus/TriangleLab Dragon hotend, for the Seckit SK-Tank with the carbon fiber X gantry. It includes support for dual 5015 blowers for part cooling, and mount points for a Z probe. I've included a…
This is a modular dome design for the SK-Tank. So far I've got some feet, a center platform, a couple of spool holders, and some options for mounting filament runout sensors and badge reels. I've designed for 3/4" and 20mm square aluminum…
This is a mount for a Biqu H2 extruder/hotend combo, to go on a SecKit SK-Tank X carriage. It takes a 5015 blower fan (see link below) and either an inductive probe or a BLTouch. There are zip tie slots included as well, and the fan duct…
This is a mount for the LDO Smart Orbiter 3.0, for the SecKit SK-Tank v2 with the carbon fiber X gantry. It supports both the MGN9 or MGN12 rails, and use with or without the EBB36 toolboard that you can get with the Tank. I don't yet…
These are parts and a base design to support a bunch of upgrades to the Printrbot Simple Metal. I have more detail on each of the upgrades on my web site here . Here is a list of all the upgrades: * Wooden 'Throne' Base Duet 2 Maestro…
This is a collection of parts to facilitate cable routing within the frame of the SecKit SK-Tank. There is a channel to go in the lower Y frame pieces. As provided, it is for the left side. It can be mirrored in the slicer to be printed…
This collection includes: NEW! Blower Gaskets: These are a pair of gaskets (print in TPU) to go between the side blowers and the blower boxes. I had those gaps taped up for the longest time, but finally got around to designing these…
These are supporting files for a little electronics project I undertook to add analog throttle controls to my VIRPIL Constellation Delta sticks, for use in Star Citizen. The project was described in a blog post on my web site, but I've…
These are printable feet for the SK-Tank. They protect your tabletop from the sharp edges of the steel frame, and are designed not to interfere with the bolts holding the frame together. The front feet can be bolted to the frame (this…
This is a version of my dome design for the SecKit SK-Tank, for version 2, with 2020 aluminum extrusion for the legs. Most, if not all, dome accessories for the v1 should also work on the v2. I found the dome platform to be particularly…
This is a set of little trays that sit in the holes in the lower rear frame of the Seckit SK-Tank. Two of them have holes to pass cables through, and the third has recesses for two 10x10x29 bubble levels* at right angles to each other,…
Here is a hotend mount for Berd-Air cooling on a Seckit SK-Tank using the BMG extruder and Dragon HF hotend*, and the optional carbon fiber X carriage. The mount attaches to the carbon fiber carriage adapter and midplate, and provides an…
I had a couple of extruder* wires break at the connector due to flexing while printing. This is a small piece that provides strain relief for the wire bundle coming from the extruder/hotend on the Seckit SK-Tank. It attaches to back of…
This is a mount for the control board (Mellow Fly CDY v2), plus a 120mm driver cooling fan, for the Seckit SK-Tank. It consists of three parts: a base, a hinged fan frame, and some little caps to go on the appropriate fin(s) to latch the…
This is a collection of parts for mounting a webcam to a SecKit SK-Tank. Cameras can be front mounted via an arm that mounts with M5 bolts in the two existing holes just below the right front pulley assembly. That arm has a 'shoe' that…
Here are some simple diffusers for 10mm RGB light strips. To make them easier to print, I divided each side into two halves, so for one side, print two copies and mirror one of them in the long direction. I glued them together in the…
The SecKit SK-Tank has a thick, heavy printbed, and without additional support, it sometimes drops a bit in the rear when the power is switched off despite the geared Z steppers. This is a mount for a Key-Bak Securit heavy-duty…
This is a simple rear housing for the power switch on the Seckit SK-Tank. It encloses a number of wires between the back of the switch and the hole through the back panel that the wires go through. I also included a cutout in the bottom,…
These are all currently available results.
