Counting matching models…
Check out the redesign with easier to print hinges and a better latch design: https://www.printables.com/model/1252247-just-in-case-print-in-place-pun-box I was following a tutorial for print in place hinges and saw a similar item on…
Required hardware: 1x Cherry MX switch or compatible alternative, bonus points for clicky Assembly instructions: Print both parts Insert the switch into the main body When connecting the plant/back to the switch, be very careful to align…
I exported the obj of my character wearing the helmet using the Runelite Model Exporter plugin . After chopping off the rest of my character, I had to make a bunch of edits to the mesh so it could be solid (video games don't require…
Same idea as my previous version ( https://www.printables.com/model/265985-just-in-case-pun-box ) but this time using conical hinges, a more compact lid, and a buckle-style latch. Prints flat on the bed with no supports. I printed this…
Friction fit on the corner of a cardboard box to make some cheap FPV racing gates. Assembly: It works best if you cut “rings” out of the middle of box (ie cut off the flaps first). You can then cut it at opposite corners and trim the…
I added a stand to the model uploaded by onmioji. The stand is 50mm wide and 5mm tall with a slight bevel on the top Print Settings Printer: Voxelab Aquila X2 Rafts: No Supports: Yes Resolution: 0.16mm Infill: 10% Filament: eSun PLA+…
Printed at 0.3mm layer height with a 0.6mm nozzle in Overture Silk Green PLA, no supports
I exported the party hat model using the Model Exporter Runelite plugin. I loaded it into Fusion 360, cleaned up the mesh, then gave it thickness. I included 3 stls: partyhat-game-accurate.stl - This is the model just after cleaning and…
A teleport tablet from oldschool runescape. I designed this in fusion 360 from scratch. The different colored sections are separated by 0.6mm (3 layers at 0.2mm layer height) so you can insert filament swap gcodes at the layer changes. I…
Bought some batteries that were mislabeled in the specs and they were too big to fit into the regular tray. Customer service gave no response so I figured I would try to make it work. The batteries fit snugly into clip (tighter than the…
A coworker made a joke in a meeting, and I knew I had to make a literal “Case of the Mondays”. Similar to my “Just in Case” , this model utilizes print in place hinges but these have been fully redesigned to use conical hinges instead of…
My batteries measure 17x6.9mm ( these from RDQ ) but I gave them a little wiggle room so slightly larger batteries may fit. I only printed the 4x5-text model as that was the one I really wanted but since I parameterized the model in…
Holes are centered for screwing 1x4 or 2x4 to 2xn boards (see 2x2 example render in pictures). Printed at 0.3mm layer height with a 0.6mm nozzle in Overture gray blue PLA.
A variation of my “Just in Case” so you can double down on the physical puns. Like the V2 Just in Case, this model has conical hinges, a more compact lid, and a buckle-style latch. Prints flat on the bed with no supports. I printed this…
Bearings should press fit but a small amount of super glue can be added to posts before adding the bearings if tolerances are off. Printed at 0.3mm layer height with a 0.6mm nozzle in Overture gray blue PLA.
Printed in black Overture Easy PLA and olive green Overture PLA at 0.2mm layer height with a 0.4mm nozzle I did a color change just after the top layer of the background, but the back of the leaf is at a separate height. You could do a…
Wiring and software are not completed yet, I will try to remember to update this when it is done. Requires: 8x 5mm x 2.6mm round magnets (I used these , although they are listed at 5x3mm, I measured them with calipers to the 5x2.6mm) 16…
A PTFE guide clip for the Voxelab Aquila's extruder intake, intended for routing filament through a ptfe tube from a dry box. I designed this part to be at the same height as this cheap dual gear extruder. Requires 2x m3x6 (can be longer)…
Mount your webcam to the MK4's X-axis, no modifications to the webcam required if it has a tripod mount (1/4-20 thread). I designed the part to have the camera sit lower to accommodate the height added by the webcam's base. I also…
A simple microphone keychain that uses multiple heights so you can change filaments to make a multicolor print without an MMU or multiple extruders. Check out the full collection here:…
Printed at 0.2 mm layer heights with a 0.4 mm nozzle in Overture orange, gray blue and easy black PLA (the blue should have been darker, but I went with what I had). The color change was done in Cura using a post-processing script at the…
A simple cherry blossom keychain that uses multiple heights so you can change filaments to make a multicolor print without an MMU or multiple extruders. Check out the full collection here:…
A simple butterfly keychain that uses multiple heights so you can change filaments to make a multicolor print without an MMU or multiple extruders. Check out the full collection here:…
Printed at 0.3mm layer height on 0.6mm nozzle with Overture Silk Green PLA. I've included the fusion 3d file so the parameter for cabinet door width can be modified
Some heart-based keychains that use multiple heights so you can change filaments to make a multicolor print without an MMU or multiple extruders. Check out the full collection here:…
A simple question mark keychain that uses multiple heights so you can change filaments to make a multicolor print without an MMU or multiple extruders. Check out the full collection here:…
A hurricane keychain that uses multiple heights so you can change filaments to make a multicolor print without an MMU or multiple extruders. Check out the full collection here: https://www.printables.com/@AndrewGeltz/collections/2387182…
A simple dog keychain that uses multiple heights so you can change filaments to make a multicolor print without an MMU or multiple extruders. Check out the full collection here: https://www.printables.com/@AndrewGeltz/collections/2387182…
A simple space invader keychain that uses multiple heights so you can change filaments to make a multicolor print without an MMU or multiple extruders. Check out the full collection here:…
Put your mealworms or other live feed at the end of the box away from the hole, and snap the lid closed.
These are all currently available results.
