Counting matching models…
This is a remix of the '7 inch LCD Case' by arrowmeiwaracing, which can be found here. I was looking for a case for my Elecrow 7 inch LCD screen to be used as a touch interface for my Octoprint server, I came across the original by…
Introduction I currently use the Anycubic RERF (Resin Exposure Range Finder) method to dial in my resin materials, as my Anycubic M3 does not support variable layer time through UVTools, RERF is the next best thing for me. I was not happy…
Board game mat storage for IKEA KALLAX or similar Overview This is a simple way to store boardgame playmats (or any other vaguely cylindrical object of diameters around 100 mm) on the side of your furniture. It is modular so you can have…
This modification allows you to use the Gamesir G8 with a Lenovo Y700 tablet. If you are confident in your first layer adhesion and ability to print 45° overhangs, print with smallest section facting the bed as seen in the image. A brim…
These are a set of protective soft jaws for the smallest Knipex Pliers Wrench (model number 86 03 125). If you work on delicate items such as electronics you can use these jaw covers to protect whatever you are working on. These jaw…
This is a replacement foot for the Ikea LÄMPLIG trivet. Print in flexible material for best results. Print instructions Category: Replacement Parts
Printing Instructions Print on it's flat face without supports, just remove and tidy up the single sacrificial layer where the screws go, a sharp knife is a good tool for the job. I printed mine in black Prusament PETG on the Prusa Mini…
This is a set of flexible covers for vernier calipers, it should fit most calipers both digital and otherwise. My hope is that it will reduce damage to the jaws of the calipers. Ideally it would hold the calipers very slightly open but I…
This is a set of accessories to mount the 7 inch LCD screen to a table or desk, such as an Ikea LACK. The mount is attached to the screen case with 4 off M3x16 bolts and nuts. The arm is mounted using 4 off M3x8 bolts and nuts. The arm…
These are a set of printable jaws for the Stanley Multi Angle Vice, they replace the soft jaws that came with the vice, I have designed a few sets to accomodate different types of work holding, with vertical and horizontal prismatic…
This is a remixed version of the fully printed resin vat drainer by MakerMatrix that has been modified to work with a frame constructed of 2020 aluminium extrusion. You can construct the entire frame with a single meter of 2020 extrusion.…
NB: You might want to print this with something like PETG or a higher temperature capable material. This will help to prevent warping from the heat of the LED ring. I use an enclosure for printing, so the light levels aren't great, I have…
This is a vacuum adapter for a Black and Decker Dustbuster, model number NV7210N, I designed this to assist with removing the air from zip lock style bags. My usage case is currently for longer term storage of filament in the rigid.ink…
This was a quick rebuild in Fusion 360 because I wanted the material details to be embossed in the swatch because my handwriting is terrible. There are 2 versions of the filament swatch, one designed to work at a layer height of 0.15 mm…
This is a remix of the 'Star Trek Voyager Communicator' by 4ndreas, which can be found here. You can use this file, in combination with raft layers and a mid-print pause to make a Star Trek Communicator badge with a pin back encased in…
This is a remix of the 'Customisable Organiser' by DarraghB, which can be found here. This is an insert I have sized to work with the Wera 2go 4 tool quiver. It has 2 rows of 3 columns, with a total of 6 slots, I have chosen this to suit…
This is a remixed version of the mostly printed resin vat drainer by Rob52 that has been modified to work with a frame constructed of 2020 aluminium extrusion. You can construct the entire frame with a single meter of 2020 extrusion.…
This is a clip over webcam cover for the Dericam web cam. I built it for the model W2, but it looks like it should fit W1 as well (not W1C or W2P.) The tolerances on the print are a little tight, but with a small amount of force I was…
I noticed that the original version of the InFiDEL lever arm would not print properly; this is because there are intersecting faces in the CAD and there are areas which are effectively infinitely thin, causing the slicing program to just…
This is a cutting template to help cut the transparent component of the Prusa face shields. N.B. THIS DOES NOT FIT ON THE BED OF A PRUSA MK3 YOU WILL NEED A LARGER PRINTER FOR THIS. Print instructions Print it out, use it to cut out face…
This version of the ESP32 Camera case works with the USB C version of the ESP32 camera module and might also be helpful with the micro USB version if the plugs are especially large. I have also removed the pesky downskin fillets and…
This is a customisable foot, the default settings are for a 2020 extrusion with an M4 socket head bolt. Print instructions Category: 3D Printing Summary This is a customisable foot, the default settings are for a 2020 extrusion with an M4…
NB: You might want to print this with something like PETG or a higher temperature capable material. This will help to prevent warping from the heat of the LED strip. Perhaps the pinnacle of "If it's stupid, but it works, it's not stupid"…
This is a wall hanger for Lego Hokusai – The Great Wave. You will need to change the position of the two hanger components on the backside of the piece, see the attached photos. The hangers should stay attached to the piece as it is moved…
This is a remix of E3D Revo Nozzle Organizer (Bosch Pick & Click) by Fabian. I had not come across these boxes before and liked the idea so I remixed the original to accomodate V6 nozzles. The organiser features a printed M6 thread so the…
This is an OpenSCAD version of the original Anycubic M3 2.6 mm Offset for Wham Bam by meierme176. It allows you to vary the thickness of the spacer. After I tried to install this on my Photon M3 it turns out that the original file can…
This is a magnetic holder for a TS80 soldering iron. Version History Version 1 - Soldering Iron Holder.stl This version uses a pair of 10 x 3.5 x 2.25 mm N45 Neodymium magnets in the base of the print to attach it to a suitable surface. I…
This is an OpenSCAD version of the original Anycubic Mono X Wham Bam Z axis spacer by Elantris. It allows you to vary the thickness of the shim. The original model can be found here: https://www.thingiverse.com/thing:4637052
This is a replacement watch strap keeper, this one is a rough replica of the watch strap keepers that came with my Traser H3 P96 Outdoor Pioneer, please see the attached drawing to determine whether this component is suitable for your…
This is a remix of Minimayhems filament sensor cover with the magnetic coupling design by Line Arc Line. This design uses 5mm diameter magnets, there are two versions of the design, one for 5mm tall magnets and one for 3mm tall magnets.…
This is an OpenSCAD version of the original WB Spacer by psdesign. It allows you to vary the thickness of the shim. The original model can be found here: https://www.thingiverse.com/thing:4533310
This is a remix of the Magigoo mount by Jubelsalami. There are 3 versions, a version in the orignal style that holds 6 bottles as well as a 4 bottle and 6 bottle version that attach to a flat surface such as on the side of a LACK rack.…
This is a photography fixture for the Smartphone Photo Studio by CreativeTools. It allows you to take repeatable photographs of the AmeraLabs Town calibration part. The original model can be found here:…
Throughout the build of the E3D Toolchanger I noticed a significant number of parts that rely on tapping into plastic printed parts, in my experience this is a great method when using M5 and above sized threads, but is not very reliable…
I often want to change soldering iron tips and never had anywhere to put the hot parts so I made this. This will work for TS80(P) soldering iron tips and I guess anything with a 3.5mm jack on the end of it?
These are all currently available results.
