Counting matching models…
So I bought a sandblasting cabinet and of course I started modifying it. One of the problems was media being stuck on any horizontal area. Surprisingly that included lower lid – a large portions of media were stuck on the slopes building…
The one in the photo is the first version of nozzle where I had to add some glue on the mating surface to build up thickness -- otherwise it wasn't locking good enough. Since then I increased thickness of locking tabs from 1.5 mm to 1.75…
One-piece sandblaster gun. It does wear out but since it's under 20g of filament I don't mind replacing it. Sand nozzle is 5 mm diameter, air nozzle is 2.5 mm, distance between nozzles either 5 mm or 3.5 mm. I use sand tube with internal…
This model is more for idea than for practical usage. It worked to some degree, but it definitely requires modifications.
Inspired by Google Pixel 8 Case by @gleonard3. I wanted slimmer case walls and less interference from the edge of the back of the case. Printed from PETG my implementation weights about 15 g. I would not recommend printing from PLA due to…
It all started with Wera Tool Check Plus set. I love the set but picking up bits, especially in gloves, were challenging. Also placing them back wasn't easy. Since I use these tool sets at home, I very much prefer easily accessible yet…
Original floss holder from Jordan has very curvy shape and most of my teeth are straight, so I had to constantly adjust angle and motion to floss properly. Alas I modeled a new handle inspired by ROCS toothbrush. Printed from PETG it's…
When printed in PETG it will likely require threads cleanup. I used tap in a drill to clean up internal thread and thread file for external threads. First screw the cap on with a towel a few times. Aside from holding a lipstick, it can…
I was somewhat repelled by Sunlu own extension for the dryer due to thick walls and no to little optimizations for FDM printing so I decided to implement one myself. I don't like how the lid works in basic version of the dryer so I…
A friend asked for wheel caps for rather large size holes -- 71 mm. It was an interesting experience, and now I publishing model in case anyone wants to print it or as a reference for ideas. Springy tabs are printed at 45° so they won't…
Inspired by Functional Print Friday. Only 19 g of filament to print, 80 mm x 20 mm. I recommend using adaptive layers to reduce layer steps in the rounded area.
The standard tip was too far of the nail entry point in my opinion. I also wanted to use nailer with 6 mm plywood (from the edge). And also nail at an angle. Printed in Colorfabb foaming TPU at 200°C and 1.1 flow.
The device features hexagonal cutout on lower part for load of the bulk of spaghetti and precision graduated ruler to adjust amount for your appetite. Please make sure that you are using it only with dry spaghetti of minimal straightness…
This summer is very humid and I don't want to unload AMS to replace desiccant beads. These can be replaced with spools loaded and have tab for handling. Holds about 50 g of silica gel beads. About 1 mm width slits. 2 pieces print in about…
Unfortunately ColorFabb 2.2 kg PETG Eco spools are huge and mostly air. 10 cm wide and 30 cm in diameter. Also I didn't want to print holder in multiple parts. It worked well for me even as-is but teflon tape eliminated occasional squeak…
Don't forget mouse ears when printing. About 50 g in PETG. 3 pcs will fit on X1C bed. Mine printed in about 2h 15m with 0.75 line width (using 0.4 nozzle)
Standard handles (part of silicone case) are just not convenient for me. Also my finger slips and interferes with the cameras all the time when using it. Handles have 0.15 mm clearance built-in. Mounted on a square profile, secured with a…
Dropout adapter model has 0.3 mm allowance for FDM shrinking! Not to be used directly for metal parts. I plan to add exact model for metal later. While building bike on a Surly Karate Monkey frame, I needed to install Shimano Alfine…
basement internal diameter 27 mm central octagon size 8.5 mm octagon height 4 mm central cutout drop 1.45 mm central cutout diameter 14.1 mm bolt size M4 x 7.5 mm bolt head size d 6.8 mm x 3.9 mm One on a photo features traditional…
There was not enough space under our kitchen sink to install reverse osmosis system, so I came up with the solution. Drawer gets reduced by 140 mm in width and filtration systems get installed in this space. Kit includes elevated stands…
The photo actually shows first version, second one is simpler. Printed from foaming TPU. We have to get dog nails quite short due to joint problems. In order to do that we need to reduce this nail seam gradually. It is only comfortable…
Print, fill with concrete or sand, glue in the plug, add rubber feet, cut the threads. The one at the photo has main body printed in PETG and jaw liner in foaming TPU. M5 x 45 mm bolt and M5 x 30 mm bolts. Threads cut in plastic. For…
These are all currently available results.
