Counting matching models…
This mixer is designed to fit into a cordless drill and can be used to mix paint in smaller paint cans. I tested this extensively and it works great, you can nicely control that not too much air is dragged into the paint and the mixing…
osVAC conversion adapters for Dust Commander cyclone dust separator. With these adapters you can attach osVAC hoses directly to the Dust Commander. Also check out my osVAC pressure relief valve adapter. The female connector uses my osVAC…
Update: some users mention that the studs are too lose and that scaling to 101% fixes the issue. I designed and printed this model a long time ago and adjusted the tolerances for my old printer which was probably not well calibrated. So…
This little Duplo compatible brick features 2 rollers so you can build a cable car or other things that involve a rope. All you need in addition is 2x Lego Technic axles (length 6 or longer) 4x Lego Technic stoppers (If you don't have any…
Slim Kärcher to osVAC Adapter. It uses my osVAC leak tight design, so you can insert a 37x32x2.5mm O-ring. If you don't have an O-ring at hand just leave it out, it will work as a regular osVAC coupling then. And the Kärcher vacuums have…
A pressure relief valve is a handy addon that prevents your cyclone dust extractor system from imploding or collapsing, if the hose is blocked e.g. by too much dust or debris. This is a mount for the pressure relief valve from Dust…
This osVAC adapter fits the Bosch 28mm dust extractor connection. Tested on my 12V circular saw and on the multi cutter (Stichsäge) and GEX random orbital sander. There are two versions of the adapter, a larger one where the osVAC…
This simple mixing cup, rod and spatula combo can be used to mix silicone rubber. The great feature is that the radius of the rod is matched to the bottom fillet of the cup, so you have thorough mixing and can sweep a lot more material…
My son loves his Playmos figures but immediately lost the red book that comes with "Liv". So I printed a new one and a compatible bookshelf. Compatible with Playmobil. Enjoy! Category: Toys & Games
This is a simple crane basket that prints without supports and let's your kid hoist toy cars with a Playmobil crane, heli or similar. It features a little dent for the tyres so that the cars don't roll out during transport. Printed from…
This is a simple replacement waste bucket for Jura coffee machines: Jura D4 / D6 / D60 Jura Impressa C Limited Edition Jura Impressa C5 / C50 / C55 / C60 / C65 / C70 / C75 / C9 / C90 Jura Impressa E10 / E20 / E25 / E30 / E40 / E45 / E5 /…
This is a Lego Duplo compatible tracked vehicle, my son absolutely loves it. With this thing you can build excavators, diggers, bulldozers, snow cats and so on. The "Antriebsplatte" need to be printed with supports and in the orientation…
My son loves to play Asterix and wanted a roman spear as a toy. So I printed a spearhead modeled after the ones in the comic books. The shaft is tapered from 20mm to 18mm, we simply rolled up some card board to form the body of the spear.…
Adapter for Bosch PEX300 and PEX400 orbital sander. Tight fit, might fit other Bosch sanders as well if they have the same connector. The design is off center to achieve a larger distance of the hose to the work piece, make sure to attach…
osVAC adapter for Bosch GAS 12V vacuum. If you have a 37x32x2.5mm O-ring at hand, you can insert it for a leak tight connection. If you don't, this will be as good as any other osVAC connector. Enjoy Update: print with the nozzle facing…
This is a remix of my filament dust filter to fit Bowden printers, e.g. the Prusa Mini. This fits nicely over a standard Bowden tube, if you need to change the size, you can either use sandpaper or modify the attached Fusion360 file.…
This thing adapts a Bosch easy click connector to osVAC. The goal was to achieve a permanent fit so it is not intended to be removed frequently. Works great so far! I use it for my Bosch GHO 12V hand planer. Category: Tools
This is a custom sprocket wheel compatible with Lego Technic tracks. Prints without supports. To assemble the 10x sprocket you need 3x M3x10 screws. The 5x thin sprocket needs no assembly. There is also a "free run wheel" included to…
The orignial LEG0 tracks do not have any grip on a flat surface, so I created some clip on inserts that can be printed from flexible filament. Works great so far, tight fit and they won't fall off. Happy printing! Print Settings Supports:…
The Lego Duplo train is great, but to build bridges, you need a ton of bricks for supports. This brick solves this issue, print it and have self-supporting connections between the tracks. Just support it with a toy and you're good to go.…
This thing turns your Hue Play into a desk lamp. I made two versions, a small and a taller one. You still need one M3 screw to fix the lamp to the stand. Happy printing! Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: No…
Simple goal wall to practice your target skills in Tipp-Kick. No need for multi color prints, just set a color change at the appropriate layer heights in your slicer. A pre-sliced profile for Prusa i3 MK3s and PETG is also attached. The…
When my son started playing with his LEGO Duplos, I immediately noticed one major isse: there are no proper wheels! Just stupid squeaky tiny wheels. So I designed larger wheels with 60mm diameter made of PETG and TPU or silicone rubber…
Simple guard rail that clips into the original holders from carrera and replaces the flimsy cardboard rails that come in the box. Print from PETG and cut to the proper length. You need good bed adhesion since the width is only 1.2mm. For…
These bridges help fixing the track in place, especially useful on slippery surfaces. Addon for the nice 1/76 RC racetrack design of robdeanhove for the cool littel Turbo Racing micro RC cars. https://www.thingiverse.com/thing:4762231…
Fits Bosch part# 2609256d57 Dust extractor for PMF250 CES/PMF350 CES. The Bosch adapter fits both the blue and the green series. Category: Tools
90 degree bend for osVAC. Print both parts as shown in the screenshot. The female connector with the slip ring should rotate freely right after printing without any problems. Assemble both pieces, should be a tight fit. I secured the…
osVAC adapter for 58mm vacuum hose connector, fits the Kärcher hoses nicely. This design uses my osVAC leak tight design, so if you have a 37x32x2.5mm O-ring at hand, you can make the connection much more leak tight. If you don't have an…
This is the bathtub version of the famous batyscaphe Trieste. The original Trieste was the first manned submarine to dive to the deepest point of the earth, the Mariana trench. The Trieste was filled with fuel, which has a lower density…
There is some debate if a dust filter is necessary or useful for a 3D printer. I honestly don't know the answer, but I prefer to not have dust in my extruder. In the first weeks of printing with my MK3 without a filter I experienced a…
With this adapter you can use your Bosch vacuum accessories like nozzles, tubes etc with your osVAC system. Update 2026: added 3D CAD files so you can edit if needed. Fusion360 and STEP file. Tested on Bosch Ultimate series 8 battery…
Introduction Colorprint is awesome until you get the bill for 10+ different filament spools. So I designed a sample spool filament system. This is also a great way to use up small quantities of left over filament, just put them onto a…
Convert your Playmobil helicopters to amphibious vehicles! Simply print the adapter plates and float, assemble with M3x10 screws and enjoy. My son loves to play with this in the bathtub. There is also a version that lets you attach the…
With this thing you can mount your CalDigit SOHO dock under your table. First attach the main mount with 2 wood screws, then insert the dock from the front. Attach the lid with 4x M3x10mm screws. There are holes and spaces for ventilation…
This is a remix of the awesome osmo pocket stand of alessandroame https://www.thingiverse.com/thing:3315469 His design works and looks great, I however needed a way to attach the Osmo Pocket more firmly for long term exposures and also…
osVAC adapter for Bosch EasySander 12V also sold as PSM 10.8 or PSM 12 This tool is for the green series of Bosch, so the batteries for the blue 12V series won't fit and there is no comparable tool in the blue series. But you can simply…
This is a remix of the great design of Stefan from CNC Kitchen. Please check it out and also his Youtube Video where he explains everything in great detail. There are two main modifications: The casting process can be much much simpler…
This is an addon to the nice AA battery holder design by jgillick and others on Thingiverse. https://www.thingiverse.com/thing:469115 When using the battery holder I found that sometimes the batteries don't fall into place but get stuck.…
Simple holder to mount the Hobbywing XR10 in your RC vehicle. Hole distance chosen for Traxxas Stampede. Use M3 threaded inserts and M3 screws to mount the ESC in the holder. If you need to adapt you can also find the Fusion360 and STEP…
Minimalistic and easy to print hose connector for D28/36mm hoses e.g. from Bosch. The design is as narrow as possible, this avoids collisions with the work piece, especially for use with sanders. The slip ring function is similar to the…
This is a slimmed down version of the great osVAC connector design. I redesigned it to fit a 37x32x2.5mm O-ring (cheap one from amazon) to achieve a leak tight fit. If you don't have an O-ring, this will behave like the standard osVAC…
In principle, a baby monitor is a nice thing. Too bad that Philips decided to remove the belt clip for the current version of their DECT babyphones. So if the baby is sleeping and you want to get some stuff done, you still only have one…
osVAC adapter for battery powered Worx circular hand saw. Replaces the original bajonet type adapter that comes with the saw. On my saw the adapter has a very tight fit, I had to convince it with a few taps with a hammer. For me this…
The design of robdeanhove https://www.thingiverse.com/thing:4762231 is great, but it doesn't offer a garage for the cars. The design is quite simple, just click in place. Make sure to print the "Balken" with the chamfered side down. Enjoy…
osVAC connector for Metabo 70 quick jigsaw, might fit other Metabo models as well. Tight fit, might need a slight tap with a hammer. Category: Tools
Simple adapter to attach the Playmobil underwater motor to the sub bot. Clicks in place. Category: Toys & Games
A vacuum robot is a great thing and ours is so flat, it can even go under the couch. Unfortunately it won't find its way out and will get stuck, so I had to design an extension to the turret, so the safety switch will tell it to turn…
My son just got a Playmobil Segway police scooter, but this thing won't stand upright and does not have any blue flash lights. This thing fixes these issues. Just print and snap in place. I added the color changes manually since this is…
Simple handle so you can transport your TV more easily. Fits a standard 100mm VESA mount distance with M4 screws. Category: Household
Simple osVAC adapter for old circular hand saw with slim 36mm connector. Tight fit. Category: Tools
This design lets you mount your Hue ambience lamp in a corner e.g. as a reading light or for indirect lighting. Just attach the mount with 2x M3 screws. Category: Household
I got my hands on a relatively cheap Bauhaus design scissor lamp from Kaiser Idell but it was missing the wall mount. As a containment I designed and printed a wall mount and a back piece, but this is surprisingly sturdy so I am not going…
Simple tool to remove the ball head from Bauhaus design Kaiser-Idell lamps. These ball heads tend to be stuck and a bit rusty, WD40 and this tool did the trick for my lamps. Worked well even with soft PETG but I would recommend using PLA…
Minimalistic and easy to print hose connector for D27/32mm hoses like Festool and Bosch. The design is as narrow as possible, this avoids collisions with the work piece, especially for use with sanders. The slip ring function is similar…
osVAC adapter for hand planer. Category: Tools
Simple osVAC connector for Metabo circular saw Category: Tools
If your good books also happen to be your 1 year olds favorite toy, this thing can protect them and save you the time picking them up from the floor 1000 times a day. The lock mechanism can be inserted in a book shelf with standard 32mm…
Taking the laundry home from the dry cleaner while pushing the buggy was quite a hassle. But this is all in the past thanks to the new coat hanger mount! It is clipped on the handle and locks against the hand brake (therefore only…
Simple mount to secure the battery powered Worx WX031.9 shopvac under a workbench. For a permanent fit you can apply the 2x M4 heat set inserts and M4 screws, but it already holds quite well without them. I don't use the screws. Category:…
This is a storage solution for your TOES (totally overengineered filament sample spool). Holds up to 9 spools. Just print the parts and assemble with M3x10 screws. The feet are optional but come in handy if you want to use the same box…
Simple holder to attach LED tea lights (38mm diameter) on an advent wreath or similar. Print with supports and insert a small wood screw. Category: Household
Simple mount for my bit box, will fit any container with <31x54 mm width/depth. I used M4 heat set inserts, self tapping would also work, just modify the file accordingly. Insert 2x M4x6 screws, adjust to length and slide into the…
The countersink drill bit is a nice tool but comes without a case, so I designed one. Fusion 360 file is included if you want to adapt. Category: Tools
These are all currently available results.
