P
PrintablesSJ-Prints
Ikea Kallax Cube Spool Holder
Adjusted into a two part model to fit into IKEA Kallax cube shelving. Print 1 long and 1 short and interlock them and slide into your cubes.
- Downloads
- 65
- Likes
- 5
- Rating
- 0
All models
Counting matching models…
P
PrintablesSJ-Prints
OpenRC F1 Front Wheel Axle 12mm Hex 1/10 Wheel adaptor - for display models
FOR DISPLAY PURPOSES AS WILL MAKE THE WHEEL FIXED Front wheel axle from OpenRC project adapted to take a 12mm hex wheel that is common on 1/10 scale cars. Even on fully built cars can be changed to this part with removal of one screw in…
- Downloads
- 37
- Likes
- 12
- Rating
- 0
P
PrintablesSJ-Prints
WLED Box - Nodemcu & PSU box
A custom box with a sliding lid to house a Node-MCU 30Pin ESP32 board as well as a Meanwell LRS-50watt-5amp. Have included the finished box as well as seperate bases for the individual components. The box should be adjustable via user…
- Downloads
- 34
- Likes
- 3
- Rating
- 0
P
PrintablesSJ-Prints
CFS Stand/Tray - Moveable on wheels.
*****Version 2 now ready.**** Redesigned to be stronger, uses nuts and bolts to join middle pieces. 8x m4 nuts 8x m4x12 screws Moved my CFS unit to underneath the printer, the printer is on top of the popular Ikea lack table. My…
- Downloads
- 33
- Likes
- 10
- Rating
- 0
P
PrintablesSJ-Prints
Cookie Cutter - gluten free
Cookie cutter for contest. Designed to leave an imprint into the cookie, so even those most convincing gluten free cookies have a clear mark of being gluten free.
- Downloads
- 32
- Likes
- 11
- Rating
- 0
P
PrintablesSJ-Prints
Gravel Bike Stand 41-43mm - 280 x 265 mm buildplate
Edited to allow the leg to be printed in two parts to fit onto the build plate, removes the requirement to glue the pieces together.
- Downloads
- 29
- Likes
- 1
- Rating
- 0
P
PrintablesSJ-Prints
10 Inch Rack Components
Getting in on the 10" rack craze. Had a 10" rack for a few years but never had a printer big enough to easily print parts for one. A lot of models I were finding are heavily restricted licenses, feel free to use/adapt these as you wish.…
- Downloads
- 26
- Likes
- 8
- Rating
- 0
P
PrintablesSJ-Prints
Mod10 Unifi AP top mount - 10inch rack
Modified top Mount for Mod10 so can securely Mount a unifi ap. Tested with u6LR, I believe the pro and unifi 7 line use the same Mount but not tested myself. Will not fall off can be held upside down as shown in photo. Note: if you have a…
- Downloads
- 24
- Likes
- 5
- Rating
- 0
P
PrintablesSJ-Prints
Dell Monitor P2423D Storage Base
A storage system to neatly fit within the footprint of the Dell monitor stand to better utilise the space it takes up on the desk. Designed around the P2423D/DE, may fit other monitors if compare stands. Dimensions are included in a PDF.
- Downloads
- 18
- Likes
- 1
- Rating
- 0
P
PrintablesSJ-Prints
Gymshark Gift Card
Print the e-gift card code that you have received via email. Allows you to give a physical item rather than a printed off email/bit of paper. Font used in example Bebas Neue. Original Source: https://github.com/dharmatype/Bebas-Neue Have…
- Downloads
- 17
- Likes
- 2
- Rating
- 0
P
PrintablesSJ-Prints
Slim Steelseries Arctis Nova Pro/7p/7x/7 Wireless Travel Case Lid - AMS/CFS
A lid to print with the original model base, removes a box shaped face on the inside of the lid. Also positions the logo object for easier printing, either change colour by object for AMS/CFS, or print the whole object as one colour.
- Downloads
- 15
- Likes
- 2
- Rating
- 0
P
PrintablesSJ-Prints
Customizable Stackable 1/10 Tire Rack for OpenRC - Shorter Top Rail
The original design was too tall to fit within my ikea kalax shelfs. Shortened the top rail mount so that it only adds one shelf and not two. Ideal for smaller spaces or if you simply have less tires to store.
- Downloads
- 14
- Likes
- 3
- Rating
- 0
P
PrintablesSJ-Prints
Camelbak chute mag handle storage infill
Had been wedging my gumsheild case into the handle gap. Decided to work on making a integrated case instead. Wasn't any handle storage accessories available so wanted to upload a few versions that can be adapted easily for other means. A…
- Downloads
- 14
- Likes
- 0
- Rating
- 0
P
PrintablesSJ-Prints
Ender3v3SE Screen Mount - RaspberryPi4b Octoprint
Version 2 now available: https://www.printables.com/model/1219990-ender3v3se-screen-and-octopi-mount I have left this up so that the basic screen or printer mounts can be used still.…
- Downloads
- 11
- Likes
- 2
- Rating
- 0
P
PrintablesSJ-Prints
Ender3v3SE Screen and Octopi mount
This is a redesign of my previous version. Base screen mount, and printer mount files are available on the original model page, to design your own mounts. Improvements Hole now present within the mount for the ribbon cable to go through,…
- Downloads
- 11
- Likes
- 0
- Rating
- 0
P
PrintablesSJ-Prints
Raspberry Pi 4b - POE headless simple case
A simple raspberry pi 4b case. This case only allows access to the USB/Ethernet end, ports on the side are not accessible, so a POE HAT will be required. I made this as part of designing a new mount for my printer that runs an octoprint…
- Downloads
- 9
- Likes
- 1
- Rating
- 0
P
PrintablesSJ-Prints
Unfi AP mount - simple
Simple functional ap mount, designed for use in integrated prints.
- Downloads
- 8
- Likes
- 1
- Rating
- 0
P
PrintablesSJ-Prints
Buck Converter Enclosure
Buck converter cover to fit commonly sold buck converter. Has a roof to cover over the wire terminals to prevent accidental shorts. Tight fit cable hole to help provide some accident pull resistance.
- Downloads
- 7
- Likes
- 0
- Rating
- 0
P
PrintablesSJ-Prints
Do Not Eat/Touch Sign
Coming up to bbq season when there is food in the fridge and cupboards that you are not allowed to touch. I have a terrible memory and always forgot, was I told not to eat or to NOT eat that food? Can be used for other season events or…
- Downloads
- 7
- Likes
- 0
- Rating
- 0
P
PrintablesSJ-Prints
G3 Flex 30degree ceiling mount
A unifi g3 camera mount, designed to give a 30 degree angle so when ceiling mounted provides an angled view capturing more of below. Does not require unifi mounting bracket or hardware. Designed to use a single 5mm screw to mount.…
- Downloads
- 7
- Likes
- 1
- Rating
- 0
P
PrintablesSJ-Prints
Tyre Tread Gauge Keyring
Simple tyre tread gauge and trolley token. Dimensions are that of a UK £1 coin. UK legal limit is 1.6mm (car) but it is often recommended to replace tyres when they are at 3mm. Quick simple keyring check.
- Downloads
- 5
- Likes
- 0
- Rating
- 0
P
PrintablesSJ-Prints
T Spark Plug Gridfinity Tray
Gridfinity tray for t spark plug handle and spark plug sockets commonly found in a set. Black 'T' insert is not a perfect fit, is made to be functional. You could create one from the offset of the inside of the box but for what I needed I…
- Downloads
- 2
- Likes
- 0
- Rating
- 0
These are all currently available results.