Counting matching models…
FIRST THING FIRST This is a remix from Thingiverse from CSD_Salzburg https://www.thingiverse.com/thing:2853261 THIS IS One of the best setup for SKADIS for thoses reasons: - Most of the thing print without support - the hook are printed…
FIRST THING FIRST This is a remix from Thingiverse from CSD_Salzburg https://www.thingiverse.com/thing:2853261 THIS IS One of the best setup for SKADIS for thoses reasons: - Most of the thing print without support - the hook are printed…
This model use the universal hook from CSD_Salzburg (Thingiverse) https://www.thingiverse.com/thing:2853261 The slot is 6mm and the round hole for the handle is 17mm. The hook from CSD_Salzburg is in the files too. Printing Informations…
Simple base to hold your LED strip to solder your wire. Perfect to make 90 deg corners. I used a leftover silicone mat to protect de base from the soldering iron. In the corner, you can add weight to help holddown the base to be sure that…
Print flat without support. 25% infill 4 perimeters (4 walls)
This kit is to replace all the part from the original cooler Coleman drain plug. I made the design to used the original gasket to prevent leak. You can print the gasket in TPU or maybe use a gardenhose gasket. Personnally, I printed it in…
To replace my broken plug on my coleman. Printed in TPU
FIRST THING FIRST This model use the universal hook from CSD_Salzburg (Thingiverse) https://www.thingiverse.com/thing:2853261 THIS IS One of the best setup for SKADIS for thoses reasons: - Most of the thing print without support - the…
I bought cheap tires from Aliexpress but I couldn't find any compatible wheels. Link to 63x26mm tires: https://www.aliexpress.com/item/1005004783223829.html?spm=a2g0o.order_list.order_list_main.50.21ef1802I5UhtY So here they are. The…
Print without support 0.16 or 0.12 layer height 3 perimeters
The switch sit inside and can't move. The external dimension of the switch is 158 x 101 x 29 mm You only need 3 smalls screws. No support needed for the print. Yay !!
A little box to save all the little doors from the Advent calendar from LEGO. For an whatever reason, the cardboard from the LEGOCITY one was thicker than the LEGO Friends. So, I made 2 versions: 10mm thickness 13mm thickness everything…
I wanted to have a lightweight sprinkler system that hangs above my gardens. EMT Galvanized steel conduit are cheap and dont rust, I then designed this double clip which attaches to the micro drip tube as well as to the 1/2 inch EMT…
This if for my RYOBI 40V tool shaft extension. I pretty sure it will fit most of the tool brand with a 26mm shaft. Let me know if you need a larger diameter shaft and I will post it here :). The one you see in the picture is the small…
Frame to adapte filter M210 filter to LS1 vaccum. Sorry for the picture, I printed the part in clear PETG :)
Simple base to hold your filaments. It's made to show your color selections. Just cut a section of +/- 32mm of each color. My print settings: resolution (Layer height) 0.20 mm or better. 3 perimeters 20 % infill No support needed 8mm brim…
Print in PETG or ABS. Supports needed.
Voici un porte-clé à imprimer en 2 couleurs pour bien identifier vos clés.
This Shelf use the container hook from CSD_Salzburg (Thingiverse) https://www.thingiverse.com/thing:2853261 The dimension are 160mm x 26mm x 30mm Print NO SUPPORTS .20 layer height 3 perimeters infill 20-30% THIS IS One of the best setup…
Print flat with support for the center. 0.20 20% infill 3 perimeters I prefer PETG for this type of print.
These are all currently available results.
