Counting matching models…
A simple test print that should cover the bed with small squares. Each square is only 1 layer (at .2 mm) thick. I use this model to adjust my z-offset to just the right value - it's really nice to see uniform, clean, smooth squares. Print…
I needed a wall-mounted hanger for a new daisho set that I bought, so i designed this. I thought most of the existing models seemed overly complicated or over-built. These are quick to print (about one hour and 40 minutes each), and are…
I needed a set of brackets to run the input shaping tests on my Ender3 V3 KE, and Creality makes you sign up for an account… which bugged me. So I signed up, downloaded the files, and I'm posting them here in case anyone needs them. Lord…
A simple bracket for directly mounting the filament runout sensor to the Ender3 V3 KE instead of using the filament holder. Prints fast, and fits fine. The mounting hole might need a little reaming out in order to press-fit the metal…
I needed a bracket to mount my 3D-Touch on my new Ender3 V2, and after looking around, decided to make my own. This one is super simple, the holes line up, there is enough clearance, and it seems stable enough. The M3 lock nuts should…
A simple 200x200x0.3mm rectangle used to test the level-ness / Z-offset of your bed. If you're not getting a solid rectangle, you'll need to adjust your Z-offset to be a little more negative (say, from -2.45 to -2.55). If your filament is…
A cute little milk crate for storing CDs. Will hold 24 of the slim jewel cases nicely. I added supports in a few spots so that it could print without general supports being enabled. Print in the normal, upright position. I uses PLA+, but…
I needed a very slight shim so that my z-axis stepper was slightly further away from the frame on my Ender3 V2. With the .4mm shim in place, my threaded rod is now an equal distance away from the frame at both the top and bottom. This…
This object was made in Tinkercad. Edit it online https://www.tinkercad.com/things/czGNmh0JVvM Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 0.2 Infill: 25% Filament: Whatever PLA Black…
This is a non-sharp, totally non-functional, very thin and floppy replica of the shuriken from “The Master”.
This object was made in Tinkercad. Edit it online https://www.tinkercad.com/things/cbX7zoXE4QQ Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 0.2 Infill: 25% Filament: Polymaker Polyflex PLA…
This is a simple replacement knob for a Singer 9805c sewing machine reverse knob. It could probably stand a little tweaking, but works on my sewing machine fine. Pics are from a real knob. I tried to make the replacement one as close as…
This is a replica of the Brides' sword Kojiri (scabbard end cap) from the Kill Bill movies. It's sized to fit a typical Chinese-made saya, which are generally more chunky that Japanese-made Iaito saya. No guarantees on the fit, though:)…
A simple little wedge to mount the display from an Ender3 V3 KE horizontally. I switched to GuppyScreen on my KE, and needed a 90 degree-turned holder, but I was limited because I'd added some supports that got in the way of other models.…
This is a replica of the second variant of the shuriken used on “The Master”, that fine TV show from 1984 starring Lee Van Cleef and Sho Kosugi. This is not a real shuriken - it is only 2 mm thick, is not sharp or sharpened, and is hardly…
A bust of Lee Van Cleef, as John Peter McAllister from the 80s television show “The Master”. I'm trying out different ways to print this for best results right now, so far, I'm trying printing with him laying down, split into a front half…
A really simple model to stick on top of the on/off button on my ResMed AirSense 11 button and make it easier to press in the dark while half asleep. I used some old double-sided phone battery tape that I had laying around, but any…
4mmHanzoTsubaMostAccurate.stl is a re-work of the design - i went back to the original and started with that, then I cleaned it up a bit (equalizing things, centering things, etc). A much cleaner tsuba, IMHO, than my original. This object…
Loved the simple and solid design that Mulilla made, but I found that the left locking tab was very delicate. I replaced the tab with a thicker tab, without the locking knob. The locking function isn't needed anyhow and now the tab is…
A little shell to allow use of 3 257 button cells instead of a 523 battery in your Mac Plus or other classic Macintosh computer. I used a left-over spring from my Ender3 (after I replaced the bed springs with better ones). And a couple of…
A replica of the butterfly pendant worn by Lee Van Cleef in “The Master”. I've tried to make it as accurate as possible, working from screen shots. I've included two versions. The three-line one is the more accurate, but nothing can print…
This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/bYpHl8IhtT6 Category: 3D Printing
Had to move the two mounting holes over 1.5mm so that this shroud could live nicely with my BL-Touch mount - other than that, it works great. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: Yes Resolution: .2…
This little do-hicky will allow you to attach the tuner part of a Snark tuner to the hooks on your Goodtime banjo. I print it at 50% infill, .20mm, PLA+. This is a remix from: https://www.thingiverse.com/thing:4180336 - I reshaped the…
Original cover design was great, and it fit, but was off (on my ender3 V2) by a few mm here and there. Changed one of the holes to a slot to better line up.
Replica medallion from "The Path", a Hulu show I have never watched;) This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/h8SthI6ASRF Post-Printing Lots of sanding, filing and general cleanup. A touch of…
No glue requried, just press fit works fine. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 200 Infill: 20 Filament: Generic PLA black Category: 3D Printing
This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/gBOMfMzN89q Print Settings Printer Brand: Monoprice Printer: Maker Select Rafts: No Supports: No Resolution: .1mm Infill: 40% Filament: Monoprice ABS…
This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/gflj9vYuB2T Print Settings Printer: Monoprice Maker Select V2.1 Rafts: Doesn't Matter Supports: No Resolution: .2mm Infill: 20% Notes: Slightly improved…
A replica of the eyepatch worn by Sho Kosugi as Yamada in “Ninja III: The Domination”. I print these in two colors using a layer change. If you want, you can order one from me here:…
This is a replica of the crane pendant worn by Sho Kosugi in “Revenge of the Ninja”. I print these in two colors (silk silver and copper). Add a tiny 3mm red gem to finish it off. I also see these on here:…
Hi, This is a manual stapler for making digest-sized booklets (an 8.5x11 sheet of paper folded in half size). I needed to make a few booklets, and I didn't want to spend the money to buy an extended reach stapler. Plus, I wasn't sure that…
This object was made in Tinkercad. Edit it online https://www.tinkercad.com/things/gyFJDrrxeLo Used these 90-degree USB-C adapters. The adapter fits snugly into the base, at just the right height to be supported, yet not move (that took a…
A simple little template that might help you set the correct size for your classic compact Macintosh CRT (WARNING: opening the Macintosh case can be deadly). Nominal size for the display area on all classic compact Macintosh computer…
A stand to hold your Kindle 3 Keyboard or Kindle 7 Paperwhite. Especially nice if it's doing the whole “Literary Clock” thing like here: https://github.com/elegantalchemist/literaryclock Only needs supports for the back cable hatch. I…
This object was made in Tinkercad. Edit it online https://www.tinkercad.com/things/hmgIowUiFrG I printed this using color/layer changes at the right points. One right after the first base layer is done, and the second after the first…
A simple little print to stop my lip gloss from rolling off my nightstand. Just slides into place with just enough “grab”.
This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/euTeIJGdk4H Print Settings Printer Brand: Monoprice Printer: Maker Select Rafts: No Supports: No Resolution: .2mm Infill: 20% Filament: hatchbox ABS…
This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/c0JRQAxM277 Add a little paracord with the inner threads pulled out. Insert the paracord up from the bottom, and push out the sides (if you see what I…
This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/bkmAB47PXj1 Turns a standard socket into a head wrench for your Goodtime banjo. Fits my socket nicely, but YMMV. Category: 3D Printing
Stabilizer coupler for 1/4" steel rod to m5 nut. Seat everything using JB-Weld. Prints with no supports. You'll also need 2 right and two left of these - POSA5 SA5T/K 5mm Male Metric Threaded Rod End Joint Bearing M5x0.8mm As well as 4…
A simple little cable clamp to hold the flag Sprite cable in place on the old stepper motor mount. It holds the cable at an angle so it doesn't touch the threaded rod. I print it upside down with supports, then pop-out the little circles…
I bought a Kershaw Amplitude 2.5, but I found the pocket clip a bit aggressive. I ended up replacing the stock clip spacer with this on (which is .5 mm thicker), and now things are a little better. Printed at 100% infill, only takes about…
Just a quick print for a little “sheath” to slide over a Swiss-Tech 6-in-1 multitool. The arms on my multi-tool tend to not stay in place when it's in my pocket, this fixes that, and protects the inside of my pocket from the screwdriver…
This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/43CY2aPNCft Got tired of trying to use the clips that the ReptiRain unit came with. These allow me to point the sprayer heads directly down into my turtle…
Needed a mount for my buck converter (apparently called a "kis-3r33" buck converter). Didn't see any for my particular buck converter, so here it is. I would upload a pic, but all my pics are TOO LARGE TO FIT IN 500KB, thingiverse! This…
This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/bgXvwdSItxv Print Settings Printer Brand: Wanhao Printer: Wanhao Duplicator i3 V2 Rafts: No Supports: No Resolution: .2 Infill: 30% Notes: Needed a way to…
This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/8cKrNosHN53 Category: 3D Printing
This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/jYSs8URLDOo Category: 3D Printing
I got tired of having my flashlight turn on in my pocket, so I slapped this cap together for it. No more button pushes in my pocket. Fit is tight. This thing was made with Tinkercad. Edit it online…
This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/7moHU0eXjA2 Print Settings Printer Brand: Wanhao Printer: Wanhao Duplicator i3 V1 Rafts: Doesn't Matter Supports: No Resolution: .2 Infill: 30% Notes: I…
This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/6xfbJCmlQyr Print Settings Printer: Monoprice Maker Select V2.1 Rafts: No Supports: Yes Resolution: .2 Infill: 20% Notes: Printed in ABS with a large brim…
I bought this TV stand from Walmart to use for a snake enclosure. It's got glass doors, two levels, and looks to be sturdily built. In the back there are two long wiring pass-throughs to provide access / ventilation. For my use, they…
These are all currently available results.
