Counting matching models…
This is my copy of the famous Szilassi polyhedron, resized for RepRap printers, including the Huxley. This unusual mathematical shape has the topology of a doughnut but using only 7 faces and 14 edges. Each of the 7 faces shares an edge…
A scan of an ornament made in 123D Catch. Instructions Not printed yet but looks as though it should print well. Category: Scans & Replicas
Iwahiro's Apparently Impossible Cube is an example of a coordinate motion puzzle - all the pieces have to be moved into place at the same time. You can find the original at http://puzzlewillbeplayed.com/444/IwahiroAIC/1/ Instructions…
I found this beautiful high resolution scan of the head of Venus de Milo at http://www.deskproto.com/support-videos/videos-venus.php and was quite surprised that it hadn't found its way onto Thingiverse yet. Their website does state that…
The designer of this puzzle, Alfons Eyckmans, has kindly given his permission for this new puzzle design to be shared for personal use. It is released here under a non-commercial licence. Please respect this. This is a 6 piece puzzle. You…
Update 21 APR 2019 There is a newer easier-to-print version of this puzzle at https://www.thingiverse.com/thing:3578594 . This puzzle was my entry for the 2011 IPP Puzzle Design competition in Berlin where it was a Jury 1st Prize winner.…
This is my entry for the 2015 IPP Puzzle Design competition http://www.johnrausch.com/DesignCompetition/2015/default.htm#08 Read more about the story behind this puzzle in the 'How I Designed This' section The puzzle is composed of three…
A simple twistable Valentine's Day gift inspired by the locket from The Illusionist Instructions Print two halves of the heart and one of tbuser's pins from http://www.thingiverse.com/thing:10541 . Make adjustments to the pin as necessary…
2020 UPDATE - Check out the three newest files for improved joints with labels and logos! Superstrings is a Turning Interlocking Cube (TIC) puzzle with only two pieces. You can assemble and disassemble the puzzle with the correct sequence…
When I had the privilege of meeting nophead and his good lady last month, one of the questions I was asked was whether I had made lots of useful things for my wife. Reluctantly, I had to admit that I had only made her a keyring, so far.…
This version rendered in puzzlecad (thanks, Aaron Siegel!) provides two benefits. First, the pieces have been split into printable sub-parts that need no support material. Each of the 3 STL files contains all the parts for one puzzle…
The four identical pieces of this interlocking puzzle make up a 5x5x3 cuboid. Gregory Benedetti is the designer of this puzzle and the plans are freely available on Puzzle Will Be Played. The pieces of this puzzle would impossible to…
Not a remix but inspired by http://www.thingiverse.com/thing:1008948 , this is an original design created in Onshape. The binocular clamp consists of three interlocking parts. The main post was designed to fit in the QS03 quick-release…
This puzzle was my entry for the 2014 IPP Puzzle Design Competition. http://www.johnrausch.com/DesignCompetition/2014/ It is an interlocking 5x5x5 cube which is 99% printable without support. Only the short tab on the ring piece needs…
Another very nice board burr type puzzle designed by Donald Osselaer and published at http://puzzlewillbeplayed.com/12BoardBurr/Faraday/3/ Converted to STL files using Burr Tools including a 0.1 mm offset for tolerance - the .xmpuzzle…
I like the proportions of this Klein bottle but I needed to make a couple of tweaks of my own. Smoothed out the sharp angle at the neck. Scaled the Z axis by 120% to make it more elegant. Reduced the overall height to 8 cm to fit my…
I love designing, making, solving and collecting interlocking 3D puzzles. I have lots in my microcubology shop on Shapeways site but most of them will not print well on current RepRap machines because of the need for tight tolerances and…
This dramatic statue is in the Hirshhorn Sculpture Garden in the Washington DC mall. http://dcmemorials.com/index_indiv0000455.htm I selected it partly for the interesting subject matter and partly because it looked pretty printable, with…
This model started life as a bronze statue in my parents' house. I took photos and uploaded them using the Photofly software at http://labs.autodesk.com/utilities/photo_scene_editor/ to create an .OBJ file. I then closed up any holes…
This new puzzle was published on Puzzle Will Be Played earlier this year. Six identical pieces can be combined using a sequence of 9 steps to make the traditional burr puzzle shape. Initially, I overlooked this as a non-printable puzzle…
This a great little puzzle by Mineyuki Uyematsu that I saw on Puzzle Will Be Played last week. http://puzzlewillbeplayed.com/444/CubeLibre/ It's another great example of a printable puzzle that requires no support on RepRap printers.…
This is a copy of a puzzle found on Puzzle Will Be Played. Its full English title is The Magic Flute - Queen of the Night as it is one of a series by Gregory Benedetti. http://puzzlewillbeplayed.com/DieZauberfloete/KoeniginDerNacht/ The…
Many puzzle pieces have complex shapes with inevitable overhangs whichever way you orient them. I would like to try soluble support material but I don't yet have dual extruder printing capability. Ordinary support material leaves nasty…
Remove the top cover. Use a long Philips screwdriver to remove the small screw deep in the cover. Print the new button on its side with support enabled. This orientation is important for strength. Pushing the new button into the hole in…
A difficult 6 x 6 x 3 puzzle consisting of a ring and four identical blocks. Fit the blocks into the ring and slide them around to make the final shape. No rotations required. Original design at…
I printed a selection of fan ducts for my Mendel90. Some of them didn't fit and others just didn't work, so I designed my own. I have copied some of the best features from other designs and merged them into a model that will fit on the…
This is a scan of the bust of Samuel Pepys that can be found in the garden of St Olaves Church in Hart Street, London. http://spitalfieldslife.com/2015/09/24/samuel-pepys-at-st-olaves/ I used the Occipital Structure Sensor attached to my…
I used my Structure Sensor to scan the Joseph Wilton bust of Oliver Cromwell in the Victoria and Albert museum in London. The scan has been cleaned up in Blender to remove holes and imperfections and make the mesh watertight. Position…
This ornament is a reproduction of the tree used on the stage set for Imogen Heap's 2010 Ellipse tour. In the photo which shows two models, the one on the left was produced by Shapeways in laser-sintered nylon and cost about £15 in…
When I bought a new hot end from E3D-online I discovered that it wouldn't fit inside the fan duct on my Mendel90, so I redesigned it. This duct is for a 60 mm fan and has a larger central hole and a slimmer profile, which allows it to sit…
Custom made mount plate to fit the stock hot-end in the twotrees Sapphire-S 3D printer and allow a Flex3Drive extruder to connect to it. The cut-out lip is needed to accommodate this hot-end mount Print Settings Printer: E3D BigBox Rafts:…
I love the design of sneakypoo's Earbud holder but I don't like turning on support in my slicer. So I designed a modified version of the shell parts with built-in support flanges that can easily be trimmed off afterwards. This way you can…
Two of these brackets mounted on the side boards will support an axle capable of holding 5kg of filament. Instructions Print with plenty of infill to make it strong enough to support the weight. Position the bracket on the board as far…
My copy of BigBox Hybrid Dual Fan Alternative by GregoryHolloway printed in black Edge filament was wilting in the heat between the two hot end blocks. I decided to try and modify the blower ducts to provide a shorter, straighter path to…
I really wanted to be able to use Triffidhunter's parametric herringbone gears ( http://www.thingiverse.com/thing:10707 ) as recommended by Richrap, but they were just too tall to fit on my X-carriage. This adapter will raise the Wade's…
This is my first attempt at a modification to my printer and I'm pretty pleased with it. I love printing with my Huxley - http://www.thingiverse.com/thing:5631 - but one of the frustrations is the major impact on print quality with even…
These are all currently available results.
