Counting matching models…
This is the first release of TIME: A 3D printed clock, designed to be as easy to assemble as possible using readily available parts. This initial release should be regarded as a work in progress, with the instructions and files evolving…
Anemometer made for an M8 bearing to minimise friction, the bearing fits inside the support.stl file. Note a modified version can now be found at http://www.thingiverse.com/thing:338464 The centre goes through and rests on top of the…
Full details and how to build available via the Connected Environments Site at University College London - https://connected-environments.org/blog/allsky/
A case for the 4.2-inch Waveshare Paper screen. The display is using Home Assistant to update the data every five minutes, in this case, data from a Weather Flow Tempest station as well as local rain gauge readings using the Environment…
Anemometer for wall mounting. Instructions Inspired by the other anemometers on thingiverse. Easy to make - requires 1 x 8mm bearing - the pictured version was printed using the Replicator 2. Print the following: Anemometer Cup x 3 -…
Case for a 2.9 Waveshare eink screen using a NodeMCU - displaying live data from Home Assistant. Code will be posted on github - at the moment it can be found via the Home Assistant Community Forum under eink (…
Joiner brackets and feet for the Hub 75 RGB LED Matrix Panel 128x64 2.5mm pitch. Model ships with the Pimoroni Interstate 75 Starter Kit https://shop.pimoroni.com/products/interstate-75-w?variant=55006518411643
The Wind Spinner / Whirligig Wood Chopper is an easy-to-make wind spinner in the style of the classic wood chopping mechanism. It can be made with either 2, 3 or 6 blades, according to your choice, and only needs a few M4 bolts/screws to…
A case for the Raspberry Pi 4 with a 3.5 inch screen - made to display weather data from Weewx/Belchertown Skin from a Weather Flow unit. However, it will work with any Pi Application. (edit just updating the main case and Thingiverse is…
A case for the Inkplate 6 - the case snaps together and includes an optional stand, allowing either wall or desk/table mounting. The back stand pushes in and should be adjusted to provide enough support, note it goes in with the…
Replacement part for a Second Hand for Smiths Ships Bulkhead Clock - looks the same as the metal when printed in black and installed on the clock. Sized to gently push on.
THE' is a mini MQTT Information Display for Time, News and Environmental Information. Using a 4.2-inch eInk screen, Its concept is simple - to display information on a rotational basis, updating every couple of minutes. The data can be…
' The Hour ' is a, 3D-printable marble desk top clock. It was made to mimic the classic stricking of the hour of a traditional clock but with a marbles. The model was designed specifically for the Marble Runs competition and fits neatly…
A Neopixel Thermometer made using a Raspberry Pi Pico - A tutorial link is incoming, see the link below for the 3D model on SketchFab. https://skfb.ly/6ZvN9 Code at https://github.com/digitalurban/Raspberry-Pi-Pico-Neopixel-Thermometer…
A total of 5 Dial Graphics are provided in this release and now on Printable as part of Open Gauges – sized to fit into the 3D printed cases. The 5 Dial Graphics are – Temperature (-10 to 40 oC), Wind Speed (0-60 mph), Wind Dir (0 – 360),…
These are all currently available results.
