P
PrintablesCaptainAwesome1776
Batman Hot Wheels Displayinator
I wanted to make a display for my 4 Batman Hot wheels cars. UPDATE added a model to allow for 5 cars! Category: Vehicles
- Downloads
- 583
- Likes
- 120
- Rating
- 5
All models
Counting matching models…
P
PrintablesCaptainAwesome1776
Gridfinity Hand Drill Holder
1x1 Gridfinity hand drill holder. It holds the hand drill and well as 10 drill bits. (Sizes in mm: 3,2.8,2.5,2.2,2.0,1.8,1.5,1.2,1,0.75) You can find the drill here:…
- Downloads
- 238
- Likes
- 24
- Rating
- 5
P
PrintablesCaptainAwesome1776
Connect One
Do you go up, to the side, or diagonally? Start in the middle or at the edge? It's your choice in the classic Connect 1 Game. Stack the one disc vertically, line it up side to side, or go on the diagonal. As long as you get one-in-a-row,…
- Downloads
- 221
- Likes
- 143
- Rating
- 5
P
PrintablesCaptainAwesome1776
4mm Thick Lithophane holderinator
I was looking for a stand to use with my Lithophane that had a 4mm slot to fit the frame. I couldn't find one, so I made my own. This one is meant to hold a T-light candle to provide the light. It came out pretty well. The lithophane will…
- Downloads
- 221
- Likes
- 18
- Rating
- 5
P
PrintablesCaptainAwesome1776
Gridfinity Precision Screwdriver Set holder
3x3 Gridfinity Precision Screwdriver Set holder. This holds the entire Pittsburgh Precision Screwdriver Set from Harbor Freight. The lid from the set folds underneath, and this holder fits into the recess in the lid. (I have cut off the…
- Downloads
- 148
- Likes
- 15
- Rating
- 4
P
PrintablesCaptainAwesome1776
Toothbrush Holdinator
This is a wall mount toothbrush holder for Quip toothbrushes. It accommodates a family of 4, or just one person who really likes to brush their teeth. It also includes toothpaste holders on the sides. 1 for the kids' fruity stuff, and one…
- Downloads
- 103
- Likes
- 21
- Rating
- 0
P
PrintablesCaptainAwesome1776
Gridfinity Harbor Freight Super Glue Holder
1x1 Gridfinity Harbor Freight Super Glue Holder. I couldn't find any models that my super glue fit in, so I made one myself. It is for the super glue found here: https://www.harborfreight.com/super-glue-68347.html Print settings: 0.2…
- Downloads
- 98
- Likes
- 16
- Rating
- 5
P
PrintablesCaptainAwesome1776
Folding Jurassic Park Pop Socket Phone Stand
Collapsible phone stand for those who use Pop Sockets. You will need to print the pieces out individually and then just put it together. It also helps to have “Print thin walls” on. There is room for a cord if you want to charge it while…
- Downloads
- 84
- Likes
- 29
- Rating
- 0
P
PrintablesCaptainAwesome1776
PLA Molecule 4040 end cap
This endcap is designed to fit the end of a piece of 40mm x 40mm extrusion. It has a PLA molecule on the face of it. Hope you enjoy!
- Downloads
- 59
- Likes
- 10
- Rating
- 5
P
PrintablesCaptainAwesome1776
Beakers test seat
This is a test seat for Beaker to ride in. While Bunson utilizes his assistants help to conduct another experiment. It is a Z-axis cover that carries Beaker up and down while your print is running. The cover just slides over the existing…
- Downloads
- 58
- Likes
- 20
- Rating
- 0
P
PrintablesCaptainAwesome1776
Autobot Display Stand
A display stand for the small die cast transformers made by Jada Nano Hollywood Rides. Created from the G1 Ark spaceship. Update I just uploaded a new version that does not have the mountain that can be used in smaller spaces. Links Jada…
- Downloads
- 51
- Likes
- 19
- Rating
- 0
P
PrintablesCaptainAwesome1776
Muppet Show Ender 3 display cover
Great for an OctoPrint setup! You will have to use a very small amount of hot glue on the corners for the frame portion of this print, to attach it to the housing of your display. The cover portion fits nicely within the frame and can be…
- Downloads
- 49
- Likes
- 11
- Rating
- 0
P
PrintablesCaptainAwesome1776
Muppet Labs sign
I created this Muppet labs sign for my Ender 3. I have always liked the Muppets, so i figure why not theme my printer after Muppet Labs! The sign clips on to the top rail. A sticker is affixed to the face of it. The sticker can be found…
- Downloads
- 46
- Likes
- 8
- Rating
- 0
P
PrintablesCaptainAwesome1776
Octopus Ender 3 display cover
Great for an OctoPi setup! You will have to use a very small amount of hot glue on the corners for the frame portion of this print, to attach it to the housing of your display. The cover portion fits nicely within the frame and can be…
- Downloads
- 46
- Likes
- 4
- Rating
- 0
P
PrintablesCaptainAwesome1776
Bunson's lab floor
This is a lab floor foor Bunson to stand on while he watches his latest experiment with Beaker. I primarily made it to keep Bunson and his accessories from tipping over. Post-Printing Assembly I attached Bunson, and his table to this…
- Downloads
- 45
- Likes
- 24
- Rating
- 0
P
PrintablesCaptainAwesome1776
12.7mm Wall Mount Bracket
I remixed DrowningCameras file to be conducive with my12.7mm thick marker board. I needed a mounting bracket to mount a dry erase Board to keep the kids' chores in order. Didn't find anything that worked so I remixed this simple clip.…
- Downloads
- 35
- Likes
- 9
- Rating
- 0
P
PrintablesCaptainAwesome1776
73mm spacerinator
I created a 73mm spacer for acarita's Ender 3 Spool Holder to use Sunlu filament. It has been working great.
- Downloads
- 24
- Likes
- 0
- Rating
- 0
P
PrintablesCaptainAwesome1776
Tablet Holdinator
I needed a holder for my Kindle Fire 10HD that would be at 90 degrees as well as not having the camera blocked. I use my Kindle as part of my Octo4A setup, and place it directly behind my printer. The camera is at just the right height to…
- Downloads
- 20
- Likes
- 1
- Rating
- 0
P
PrintablesCaptainAwesome1776
Octopi Ender 3 display cover
Great for an OctoPi setup! You will have to use a very small amount of hot glue on the corners for the frame portion of this print, to attach it to the housing of your display. The cover portion fits nicely within the frame and can be…
- Downloads
- 18
- Likes
- 2
- Rating
- 0
P
PrintablesCaptainAwesome1776
Filament holdinator
I modified da_syggy's inverted spool mount to have the spool cantilevered over the side to eliminate the need for a filament guide. Now the spool hangs in line with the z axis extruder, and the circumference of the spool creates a…
- Downloads
- 15
- Likes
- 3
- Rating
- 0
P
PrintablesCaptainAwesome1776
K&M Swivel Joint end cap
The videography business that I work for as a side hustle ordered a new set of Pyle PMKS56 boom mics stands. They arrived the day before the performance, and one of them was badly damaged. The one that was damaged had a K&M 6.27105.1.55…
- Downloads
- 10
- Likes
- 1
- Rating
- 0
P
PrintablesCaptainAwesome1776
Muppet Labs bed handle
A nice bed handle with a famous quote from Muppet Labs. "Where the FUTURE is being made TODAY!" Post-Printing You will need to remove your 2 front bed leveling knobs and place this handle between the knobs and the springs. Works well…
- Downloads
- 9
- Likes
- 1
- Rating
- 0
P
PrintablesCaptainAwesome1776
Octoprint Ender 3 display cover
Great for an OctoPrint setup! You will have to use a very small amount of hot glue on the corners for the frame portion of this print, to attach it to the housing of your display. The cover portion fits nicely within the frame and can be…
- Downloads
- 6
- Likes
- 0
- Rating
- 5
P
PrintablesCaptainAwesome1776
Beakers Bell
This is a bell designed to go with Beaker's Test Seat by Captain Awesome. It slides nicely into the end of the top cross bar of an ender 3. As Beaker rides up the Z axis, he gets closer to ringing the bell. (He will not actually collide…
- Downloads
- 5
- Likes
- 0
- Rating
- 0
These are all currently available results.