Counting matching models…
Modified the Raised Voron Trident XY Cable Bridge to suit 2 hole cable chains such as the ones provided in the LDO Trident kits. Raised 13mm Printed, fitted and tested on my Voron Trident. Fixes an issue with the XY Cable Bridge rubbing…
I wanted to check the alignment/collimation on my Svbony SV121 Laser Collimator, but other existing tools didn't work as it has 2 different diameters to the front an rear of the housing so I designed my own alignment jig for it. Uses 4 x…
Flex Plate Stops to suit the print bed that ships with the LDO Voron Trident Kits Print 2 of them in ABS or other heat resistant filament. Insert heat set inserts in each side of the print. Drop into the cut outs in the rear of the heat…
Came up with this design to fit the HDZero Race VTX into a 30mm stack mount on the FPV Cycle Glide frame. Offset it so that it will sit inside the standoffs, just enough clearance to get squeeze it in and clear everything. I run mine on…
Various Antenna mounts I have designed for my FPV Cycle Glide Frames should be something to suit most applications and tyes. May also work with other frames with 27mm spacing between stand-offs. Print in TPU for best results.
Camera Mount to install a Runcam Split Mini Camera into the iFlight iX3 V2 140mm Quadcopter Frame. Note: I have upgraded my standoffs to 35mm to get the stack to fit in this frame, it will not fit the standard standoffs. Print Settings…
First design I created, made to fit Martian II with 6mm diameter stand offs (larger than stock) has a recess to fit Immersion RC Tramp VTX Antenna SMA Mount but will probably fit most similar VTX mounts. During my latest build I decided…
Lightweight battery protector I designed for the Sparrow 3" quadcopter to protect the underslung battery from the sharp pointy things and impacts. Suits 4S batteries from 600mah to 1050mah and others of similar dimensions. This has been…
A top cover I made to check the fit of my drawing files while I working on some other ideas for the GepRC MX3 Sparrow Frame. Makes a neat way to close the top of the frame and give your stack a little bit more protection. Sits nice and…
I found that when using a 20mm Flight Stack with a UFL Antenna in the GepRC MX3 Sparrow frame that it tended to come straight out the back right in line with the props and it would hit them occasionally. So I drew this Antenna holder up…
Side Load 30 Degree GoPro Session Mount with ND Filter Holder to suit the Impulse RC Reverb The design has been solidly crash tested as well now :p proven to be tougher than a park bench Added a New Version V3 which is lighter and has an…
Adaptor Plate for the Predator Mini to move camera forward 5mm to get standoffs out of camera view. Use Brass Blind Nuts from a similar adapter to fit in rear holes (may need to heat up and press in) I found a soldering iron set around…
These are all currently available results.
