Counting matching models…
I didn't find a fitting sheriff badge, so i made one myself. Printed with a .25mm nozzle and .10mm layer height so that the text is easier to print. Made a filament switch at 3.10mm so that the upper ring has another color. Glued the two…
It's a recreation of a Tenex 300 series tape dispenser. I used a 20mm wide metal tape cutter blade from another old dispenser. The top half can just be pressed on the bottom half and you could fill the holes with sand if you want to make…
after an insightful comment from @Bischi_244918 i've remixed my tape dispenser to fit on a 2x4 Gridfinity grid.
I split the model into two pieces so that the inner side is as smooth as possible. Glued together with some drops of CA glue. The latch on the bottom half needs to be wiggled a bit after printing so it can move freely. It has a little…
Printed it with PETG @0.6/.30mm layer height. The holes for screws have a diameter of 3.5mm.
edit: I've added a version 2 which has thicker outer walls and an adjusted cover.
I've used some glue strips to attach it to the wall. STEP file is included if you want to make changes, eg. holes for screwing it onto something.
Simple Bialetti Venus 6 cup holder. It's for the old model with the plastic thumb-rest on top. Fits the three parts at an angle so the water can run out. It has a small drainage but i suggest you dry the coffeemaker a bit before putting…
I remixed the body so it uses no screws.
Inspired by @MCollins_25719 print sheet holder https://www.printables.com/model/19318-steel-sheet-holder-for-prusa-i3-under-table-mount One set of holders are used as a spacer (gray prints) for the screws that would otherwise be in the…
A spare brake pad set for your bike toolset. It's compatible with all Magura MT 2 caliper brakes. You'll need a Torx TX25 wrench to assemble/disassemble it, because you need the same tool to replace them on your brake. Prints without…
These are all currently available results.
