Counting matching models…
This is a slim compact case for a SSD1306 I2C 0.96" OLED Display Screen. The case was designed based on the measurements of this model I ordered from AliExpress. Other boards do vary slightly, and the model's clearances are very tight. A…
Redesign of a simple micro SD card organizer, based on the original MicroSD Card holder by FritoBandito. Created a new model in Autodesk Fusion 360. Redesigned the slots for easier card removal. Print with 0.2mm layer height
You should do an extruder calibration first before tuning flow. I use these flow calibration squares to find the best flow and layer height combination. Slicing with Cura To slice the .stl in Cura 5 with custom flow settings per tile:…
This is a slim case for ESP32-C3 Super Mini Development Board. Ideal case for a small Home Assistant Bluetooth proxy. This is designed specifically to fit these ESP32-C3 Super Mini boards I purchased from AliExpress based on the board…
13 infill sample swatch cards for Cura infills: Grid, Lines, Triangles, Tri-Hexagon, Cubic, Cubic Subdivision, Octet, Quarter Cubic, Concentric, Zig Zag, Cross, Cross 3D, Gyroid Recommended slicer settings: Layer Height 0.2 Top/Bottom…
Simple bit holder I designed for my collection of Dremel bits
16 infill sample swatch cards for PuraSlicer infills: Recilinear, Aligned Rectilinear, Grid, Triangles, Stars, Cubic, Line, Concentric, Honeycomb, 3D Honeycomb, Gyroid, Hilbert Curve, Archimedean Chords, Octogram Spiral, Adaptive Cubic.…
Collection sample swatches for testing different slicer top layer finishes Print with a 0.2mm Layer Height and enable the Print Thin Walls option. Top Layers Cura: Lines, Zig Zag, Concentric PrusaSlicer: Rectilinear, Monotonic, Hilbert…
This is slim compact case for a ST7789 I2C 1.54" TFT Display Screen. The case was designed based on the measurements of this model I ordered from AliExpress. As with the other slim cases I've created the model's clearances are very tight…
This is my first Gridfinity design. After printing the gridfinity 1x2 D battery block by BenBreaksThings I was looking for a similar holder for some C sized batteries. Designed the model in Autodesk Fusion 360, following the sizing from…
Based on the Customizable Filament Swatch box by Makkuro design. Rather than using OpenSCAD I re-created a model in Autodesk Fusion 360. Holds 30 half-width swatches (30h x 40w x 2mm) that I've created for testing infill patterns and…
A slim case for the ESP32 Devkit V4 micro-USB micro controller boards I picked up on AliExpress ESP32-WROOM-32D . The style of this case is inspired by the Raspberry Pi Pico snap-together case by @glabifrons Designed for a 0.2mm layer…
Remix of the Logitech Streamcam Tripod Mount with Joint by Neoz3d Rebuilt from scratch in Autodesk Fusion 360 based on Neoz3d's design. Model is fully 3D printed. Replaced the need for an M3 nut and bolt with a printed thread and nuts…
Slim SD Card organizers to hold 4 (2x2) or 6 (2x3) SD Cards These are designed for a 0.2mm layer height. Printed in PLA.
Remix of YubiKey 5C Nano cover by jkim_makes I've been using the original model for a while since I found it on Thingiverse and I love it. I did however find it would fall off my Yubikey easily as the inside grove doesn't align with the…
Gridfinity 1x2 3u high bin to hold a BT-168D model Battery Tester upright. Printed in PLA. 0.2mm Layer height. 15% Infill
A simple slim light weight enclosure for a BME680 sensor. Designed based on the measurements of the specific board I was using, your mileage may vary. STEP file and original Autodesk Fusion model file included.
Slim protective case for the LD2420 24Ghz mmWave Radar Human Presence Sensor like the Hi-Link HLK-LD2420 from AliExpress Similar to my other display screen and ESP32 cases, this provide a minimal case with easy access to the pins for…
A slim case for the ESP8266 NodeMcu V3 CH340 micro-USB micro controller boards I picked up on AliExpress NodeMcu-CH340-V3 . The style of this case is inspired by the Raspberry Pi Pico snap-together case by @glabifrons Designed for 0.2mm…
I'm using this design to encase old credit card sized hotel room keys I've repurposed for use as NFC tags that trigger home automations. There are two versions of the model, a single sided slide over cover, and a double sided click…
I use this quick test after changing filaments to ensure that flow calibration is dialled in for good first layer adhesion, squish, and tolerance. Different colour filaments, even of the same brand, can have very different flow…
Section dividers for Keter Pro Cantilever Organizer to separate contents of the smaller (top level) removable bins Original The original version is a simple sliding divider to help separate the contents of a bin. Full Bin Insert…
Did you know Fusion 360 has a built in slicer! 13 infill sample swatch cards for Autodesk Fusion 360 slicer. Gyroid, Rectilinear, Star, Honeycomb, Squares, Spherical, RhombicDodecahedron, ElongatedDodecahedron, TruncatedDodecahedron,…
Created the model in Autodesk Fusion 360. I printed in Black TPU 98A with 25% Infill. 0.16mm layer height.
This is a remix of the Short Foldable Desiccant Box by NarlyB that customizes the box and lid walls to use infill modifiers. The original model is awesome, but using infill patterns instead of the fixed grid of holes provides a lot of…
My take on a 1x1 Gridfinity bin for hex bits. Holds 16 bits in a 4x4 grid. Created with a 6.5mm hex inner diameter which is a good fit for my tapping drill bits without being tight. OpenSCAD model file included. Requires Gridfinity…
17 infill sample swatch cards for BambuStudio infills: "Concentric", "Rectilinear", "Grid", "Line", "Cubic", "Triangles", "Tri-hexagon", "Gyroid", "Honeycomb", "Adaptive Cubic", "Aligned Rectilinear", "3D Honeycomb", "Hilbert Curve",…
I wanted a basic organizer for my USB dongles to keep them in one place, without being a bulky desk organizer. So I created this simple model for my specific needs to hold 5 USB C plugs, 1 USB micro, and also 1 HDMI mini to HDMI dongle.…
Vertical stand for the Anker Powerport Speed 5 USB power charger Full Base 2023-03-26 - Added new "Full Base" version which completely cradles the base of the charger. Original Original independent stands. Print two of the stands. Each…
Gridfinity organizer for a 6 piece HSS Round Saw Blade set (5 blades and 1 mandrel). This is designed for the set I picked up off AliExpress, there seems to be many similar sets available. Holds the 1/8" (3.2mm) mandrel plus one each of…
Nozzle adapter for a Shark Euro Pro 700W to use standard 32mm attachments. Might work with other similar Shark vacuum models. Inspired by the “ Portable vacuum PVC adapter ” by PocketBrain (Thingiverse), but fully recreated the fitting in…
Starting point for creating a custom Rail for the main crossbar of an Embassy suspended ceiling panel kit from Costco I'm creating some custom rail pieces for an area where the standard rail attachments can't be used due to restricted…
Created this custom mount to hang my Tuya Zigbee Smart Gateway Hub to the wall socket USB charger. Autodesk Fusion 360 and STEP files included.
Our kitchen sink has some protective bumpers to prevent the metal sink tray from knocking against the sides of the sink. Over the years a few have come off and got lost so I designed a printed some replacements Recommended print settings:…
Simple attachment to add color light filters to the Wasserstein Floodlights I have for my WyzeCam v2 and WyzeCam v3 The filter disk can be printed in your choice of color to either soften the bright white of the floodlight with an warm…
This is the first thing I created in Tinkercad for 3D printing and the very first thing I printed on my Ender-3 V2 using the generic PLA that came with the printer. It's has no specific purpose, just fun to create and print a hollowed…
This is a custom replacement mounting bracket for the Merkery Smart Solar Spotlight ( available from Walmart ). The original has a ground spike or screw mount fitting. I needed something to clip around a 22.5mm square cross beam of the…
These are all currently available results.
