Counting matching models…
Combined 2 different DL-44 files found here on Thingiverse to try and get the proportions a little more to scale. See "Remixed Files" section for source files. Since this was made by combining two different source files, the flash…
It's a remix of the Ender 3 DragonBurner mount. Modified the toolhead mounting holes for brass inserts to be installed from the back for a more secure mount.
Remixed this mount to make the fit a little bit better to include: Shaved top sides Variable screw angle More depth for screw mounting location & silver pucks (see model - not printed example)
Remix of Nozzle Torque Wrench & Bit Holder Gridfinity by crealitycheck. Lowered bin height and added nozzle holder(s).
This is a remix of frubino Tripod Cam-Lock Repair parts modified and scaled to replace/repair all 3 cam locks on the Manfrotto 714B. Found the 714B had a smaller cam lock than the ones provided by the original designer and other designers…
Remix of Gridfinity GoPro Hero 11 Holder by @keith_972312 with a lower bin height.
Mobula 7 Battery Shim for when using a battery that's too thin like the WeBleedFPV folded 450mAH batteries or 300mAH batteries Print flat on the bed with supports (see pics). 100% infill Category: R/C Vehicles
Sherpa Mini Ender 3 Direct Drive Adapter Suggested Print Settings: ABS, ASA, PETG 0.2 Layer Height 40% Infill 4 walls/perimeters 5 top and bottom layers NOTE: I also include a mount for the HeroMe Print Settings Printer Brand: Creality…
Wago 221 (2 connnector) mount for Qidi Plus4 inner wall standoff
Qidi Plus4 Broken Heater Chamber Mount Fix - Nut & Bolt substitute. I made this part instead of using the recommended nut-and-bolt solution proposed by Qidi support when my heater chamber fan snapped off. Made this fix to integrate a…
Wera 816R Speed handle for Gridfinity
Remixed HDZero Lite Whoop Camera Mount (Adjustable Angle) by MrShutterBug to include a hood for a little added lens protection. High - HDZero Lite Lens Med - HDZero Lite Lens (glued like in MrShutterBug's video - less surface area to hold…
Removed the built-in antenna and top switches on my Radiomaster TX16s and needed to plug the holes. Printed in TPU. Category: Other
Vannystyle armguard & skid combo inspired by Brain3D's version Category: Other
This is Lulzbot's Taz 6 Filament Feed Tube and Mount. Found I could easily use this on other printers. Thanks LulzBot for the simple functional design! Category: 3D Printer Accessories
I created the adapter standoff for @Sarge013 low profile heatsink SSR mount (FIRST VERSION) . NOTE: There may be a new version available from @Sarge013 now. I had to make these as I was in a slight bind because I had already removed my…
BMW e83 (X3) lighter socket fix
HTU21D case. Can be used to mount to extrusion Print Settings Printer Brand: Creality Printer: Ender 3 **Rafts:** No Supports: Yes **Resolution:** 0.2 Infill: 25% **Filament:** Polymaker Polyflex ABS Black Category: 3D Printer Accessories
3DBenchy is a great troubleshooting 3D print torture test. One thing I had difficulty printing was a clean chimney stack. Unfortunately I had to wait until the very end of the print to verify whether or not slicer changes were improving…
Qidi Plus4 10mm x 3mm Belt Tensioner Shim There have been report(s) of reducing some VFA using either belt tensioners like one by @Jerky_FPV_1021902 or adding spacers (3 stacked M5 washers) in the stock preloaded tensioners and rewracking…
Vannystyle Action 2 Mount with ND Filter Slot REMIXED from design by PhiveOne_FPV Category: Other
Fidget spinner thumbpad / pin. Pre printed spinner available at: https://www.etsy.com/listing/526611479/fidget-spinner-made-in-the-usa Category: Toys & Games
DJI FPV Camera Adapter Originally created this DJI Camera Adapter for the FlightOne WildWilly Dolphin1 frame. Should be able to use for other frames that were designed for full-size cameras. Print in PETG or ABS Category: R/C Vehicles
SourceOne V4 & Apex - GoPro Hero 11 Mini Mount - Side Load & Vented Thanks to Pokey FPV for providing the GoPro Hero 11 Mini top originally clam shell style. Check him out at: https://www.youtube.com/c/PokeyFPV Category: Other
Skyliner MK3 - GoPro Hero 11 Mini Mount Thanks to Pokey FPV for providing the GoPro Hero 11 Mini top Check him out at: https://www.youtube.com/c/PokeyFPV TWO versions available: 1 - Side Load & Vented 2 - Clam Style (QUICK load but…
E3D Titan Bowden Mount designed to attach to the Prusa MK2 power supply. MK2(S) Bowden X Carriage adapter here: http://www.thingiverse.com/thing:2233222 Category: 3D Printer Parts
These parts were designed with Cricket when v1 was released. Some parts should transfer to the new versions, but I am not entirely sure which ones. See README.txt for some notes on some parts
Remixed this VTX antenna mount for CraftQuads LoFlo frame Category: R/C Vehicles
Sony ICD-PX370 Mono Digital Voice Recorder - Gridfinity
Ummagawd Cricket Moongoat GoPro Hero 11 Mini Mount Thanks to Pokey FPV for providing the GoPro Hero 11 Mini top so I can add the Moongoat base!!! Made a second version that is side load Check him out at: https://www.youtube.com/c/PokeyFPV…
FatShark Fan Guard - theFPVgeek edition Category: R/C Vehicles
Y Belt Tensioner for Prusa i3 MK2(s) inspired by IsmaelPR1's design. Redesigned / Remixed to use M3 bolts and square nuts. Print with main block with supports Category: 3D Printer Accessories
Skyeliner HD Skull GoPro Hero 7 Mount Category: R/C Vehicles
Vannystyle - GoPro Hero 11 Mini Mount Thanks to Pokey FPV for providing the GoPro Hero 11 Mini top Check him out at: https://www.youtube.com/c/PokeyFPV TWO versions available: 1 - Side Load and vented 2 - Clam Style (CINEMATIC USE ONLY )…
Pirat Hook V2 - GoPro Hero 11 Mini Mount Thanks to Pokey FPV for providing the GoPro Hero 11 Mini top Check him out at: https://www.youtube.com/c/PokeyFPV TWO versions available: 1 - Side Load & Vented 2 - Clam Style (CINEMATIC ONLY) -…
Vannystyle front bumper inspired by Brain3D's version Category: Other
Pirat Hook V2 DJI Action 2 Mount Category: Other
My old Slick tripod broke (see pics) so decide to create a small adapter to fit between the tripod and hot shoe / cold shoe mount. Hotshoe clamp: https://www.amazon.com/gp/product/B00K17THY2 Category: Camera
This is Direct Feed Titan Extruder X-Carriage designed to work the the Tevo Tarantula. This was designed to work specifically with an E3Dv6 Hotend, E3D Titan Extruder, and a Nema 17 Pancake Stepper motor (Link below to dimensions and…
Broke one of the blocks on my cheap Flash Bracket Swivel Umbrella Holder so instead of throwing away quickly designed this replacement piece. IMPORTANT: This is NOT the entire Flash Bracket Swivel Umbrella Holder. Just a replacement for…
Skyeliner (Std & HD) - Immortal-T Bottom Mount Category: R/C Vehicles
Rebel Rukus Immortal-T Arm Mount Category: R/C Vehicles
20x20 VTX / RX Plate for Mini or Micro quads Category: R/C Vehicles
Ummagawd Cricket Moongoat Hero 7 Mount Category: Other
Pirat Hook V2 - GoPro Hero 9 & 10 Mount Category: Other
Vannystyle front bumper inspired by the Brain3d version Category: Other
Ethix Multi-Purpose Prop Tool Hex End Covers Category: R/C Vehicles
Designed this GoPro Session mount for the BQE 5AFX with Basher United (see link below) Be sure to check his channel out and subscribe to see this print in use :) https://www.youtube.com/user/BASHERSUNITED Message me if you'd like one…
This is a revised and improved version of my original Flash Umbrella mount (top) fix. Improvements: Added angle to the bracket to angle the umbrella and flash towards each other for better placement Added / made bracket for the rear to…
Shendrones Squirt GoPro Mount Reinforcement Plate Print in PLA or other HARD plastic. Will need longer screws. Category: R/C Vehicles
Remade these in Fusion360. Decided to modify the center mount to a hex hole and is underside for a very tight fit to prevent rotation and sipping up or down. Part is meant to be printed in TPU 100% infil. Category: R/C Vehicles
Remixed / adjusted thingirob's Tevo Tarantula Modular X Car Basic X Carriage to accommodate for the Openbuild wheels and Openbuilds Aluminum Extrusion. Wheels fit in the V-Slots better but results in the spacing to be too wide for the…
Skyeliner HD Session GoPro Mount Category: R/C Vehicles
HE3D K200 220mm Bed Mount Top/locking mechanism will be uploaded shortly Category: 3D Printer Parts
Rear SMA (TBS Style) Mount - Project399 Super G / G+ Category: R/C Vehicles
Newbeedrone Smoov ESC covers Thick and Thin versions. Has cut out for the LEDs Design inspired by covers I've seen used on Drib's quads Category: R/C Vehicles
ARMATTAN ROOSTER SESSION MOUNT Message me if you'd like one printed. Please visit my Instagram at https://www.instagram.com/thefpvgeek/ for more designs and other related pics. Category: R/C Vehicles
Tevo Tarantula X Cartridge w/Autolevel Sensor Mount Uses heat press screw inserts in the carriage. Available for purchase here: http://www.mcmaster.com/#94180a331/=118mq8b NOT my design. Forgot where I found it. Want to mod it a little…
AstroX Johnny_FPV Foxeer Lollipop & Diversity Antenna Mount Message me if you'd like one printed. Please visit my Instagram at https://www.instagram.com/thefpvgeek/ for more designs and other related pics. Category: R/C Vehicles
Armanttan Chameleon (Aluminum) Session Mount Category: R/C Vehicles
Had "fix" the original file as I was having issues printing the original file Category: R/C Vehicles
TBS SourceOne GoPro Couch (30 Degrees) Made this couch but haven't tested fitment yet. Feel free to try and report back. Category: R/C Vehicles
XHover Skyeliner Session Couch V1 Message me if you'd like one printed. Please visit my Instagram at https://www.instagram.com/thefpvgeek/ for more designs and other related pics. Category: R/C Vehicles
Foxeer Lolipop Stubby mount 26mm standoff Message me if you'd like one printed. Please visit my Instagram at https://www.instagram.com/thefpvgeek/ for more designs and other related pics. Category: R/C Vehicles
XLabs Steez Battery Couch (Inspired by Craftquad's LoFlo version) - Centers the weight of the battery even more in the toilet tank position. The battery sits at a 30-degree tilt. For my setup, I noticed when the battery was mounted toilet…
Created by Ioannis Hagström Category: 3D Printer Parts
These are all currently available results.
