Counting matching models…
Remixed (from scratch) for a standard, X-ACTO #11 blade. See here for a minimal version... https://www.thingiverse.com/thing:3183256 Print Settings Printer Brand: XYZprinting Rafts: Doesn't Matter Supports: No Notes: Designed for 0.4mm…
As simple holder for two LR44/AG13 batteries using a standard paperclip cut down into two parts. Category: DIY
Here is the minimal version with update for using two X-Acto blades. Category: Hand Tools
Remixed with a 3/16" post to use with a standard, helping-hands unit. Also angled the tips by 4° so that they are more parallel when used on thinner items. Update: Made the middle sections taller and a bit thicker as what I printed…
Another remix for a minimalist version. Still uses an X-ACTO #11 blade. Print Settings Rafts: Doesn't Matter Supports: No Category: Hand Tools
Remixed for quicker printing and no supports. My earphones are just wrong for this. ;) v2 is for others with earphones like mine shown in photo. I've added protrusions to help keep the wires in place when you wrap them around the body.…
Remixed to eliminate the battery and go back to the pogo pins (the wire-version was very fiddly). Also reduced the width to fit better in a cartridge of mine that was a bit tight, bumped up the height of the inner "rails" so that the Nano…
I saw products like this at a car show and felt like trying some out. Category: Earrings
The Safety Shield is nice pill cutter, but it's made for round tablets. This nest holds 11mm, oblong tablets. Not sure if it's needed, but version 2 is rotated to lie flat if your slicer can't place a model flat on the build surface.…
Angles the mini up by 10° more. Category: Computer
A protective cap for your extra pod. Second version added that is a bit looser and has ribs for better grip. Category: Other
Holds 3x 12mm, 2x 18mm, and 1x 24mm tapes. Designed for 0.6mm nozzle and print time is 43 minutes for me.
Parts to hang hats on Dakota Closets shelving units. Two, 5mm x 10mm Euro screws attach the brackets to the units. Example of screws .
Remixed (from scratch) for the Scotch Brite Dish Brush which has more of an overhang so it requires a bigger base. Print Settings Rafts: No Supports: No Notes: Print with threaded portion down. Post-Printing Don't forget to transfer the…
Just big enough to work! Print as shown in the second image. 34 minutes for me! Update: Added a version that tips the Mini back 10°. It should print in less than 30 minutes. Print Settings Rafts: Doesn't Matter Supports: Yes Category:…
Mount with provisions for a right-angle USB connector and AMPS hole pattern. Uses two, #4 x 3/8 screws. I used a couple, small dabs of epoxy to hold the USB connector in place. Not for bare phone, but with a case. Print Settings Rafts:…
The Chromecast remote is a bit small for my hands, so I created this to make it a bit longer. Print Settings Rafts: Doesn't Matter Supports: Yes Category: Household
Remixed for quicker creation and much less filament. ;) There is a printed top and bottom frame, but the large portions are now cut from chipboard (DXF pattern supplied). Slip the cut pieces into the grooves as noted in the DXF file. You…
The Dakota Closets system from Menard's is pretty nice, but the location of the wardrobe rods are too far forward. This template helps with drilling new holes 3" back from where they are now. Note that some of the uprights I have use…
Thickened up the top and added a taper. Category: 3D Printer Accessories
The VGA plug was good, but this takes it back much further! Print two.
Remodeled the Screwie for use with a 0.6mm nozzle.
Remix of... https://www.thingiverse.com/thing:2922204 ...to eliminate the battery and go back to the pogo pins (the wire-version was very fiddly). Also reduced the width to fit better in a cartridge of mine that was a bit tight, bumped up…
Remixed this for my x-carve CNC with a Misumi-extrusion bed upgrade and mini toggle clamps from Amazon . Designed for #4 screws and nuts. Clamp can be mounted either parallel, or perpendicular to T. v2 has been adjusted for a better fit…
Clips onto the extruder stepper motor with clearance for an extruder indicator. Uses two, #4 x 3/8" screws. Print Settings Notes: Print the mount with the dog-leg to the bed. The holder should be oriented with the large hole perpendicular…
Snaps on shaft of screwdriver and holds four bits. Irwin 1948779 Category: Parts
Aligns door/window casing rosettes for 1/4" reveal.
Conversion parts to hold the standard, 5" lens (5 diopter) on a Lumapro magnifier light (6MNU series) for quick lens swaps. Print upside down from preview. Update: Added a version for an 8 diopter lens. Also added numbers to the side for…
A towel-hanger clip for the SimpleHuman pump dispensers. No drilling or adhesive! Sized for a towel rack with a 3/4" square bar and a #8 x 3/8" screw. If you have the dual or triple version, print two. Category: Bathroom
Another version of the handle. The other one ( https://www.thingiverse.com/thing:2223698 ) has a through-hole that seems too small. Mirror for the other half and glue together. Category: Bathroom
Reworked for easier printing (hex holes) and 30mm slot centers. Print part C face down for no supports (there are bridges instead). You will need to punch through a one-layer membrane for the M5's. Category: Machine Tools
Update 2: Angled the nest for the brush by another 10° (20° total) for better cleaning action. I'm no longer sure where I saw the idea for this, but this one is modified for my preferences. It was made to hold part of a wooden, Harbor…
These are all currently available results.
