Counting matching models…
My wife wanted some embroidery hoops in fun colors for display of her projects, 3D printer to the rescue! I printed these with 20% cubic infill with 3 walls in Prusament and Printed Solid Jessie PLA. No supports needed. I've uploaded a…
I recently decided to install a BTT smart filament runout sensor on my Voron V2.4. I side mount my spool holder (front left of the machine) so I wanted a sensor inline with the bowden guide which would be easy to load, easy to access, and…
Updates: May 2024: Added a very tight 0.1mm tolerance version June 2024: Added LED version I designed this for my kid after they got a kyber crystal on our Disney trip and wanted to wear it. The design is based off the Jedi crusader…
Spring steel flex plate holder which attaches to the top extrusions on a V2 (I think this should also fit a V1/Trident as well) and holds up to 3 plates. 250mm, 300mm, and 350mm total lengths available. I have 3.4mm thick panels and 1/8…
A remix of the GaggiMate pro pcb bottom. You will still need the cover available from the GaggiMate GitHub or you can use this remix for an easier no support print. Superglue or epoxy the 6x3mm magnets into the underside and then assemble…
These two prints allow for the smart filament sensor to be mounted to the top cross piece of an Ender 3 printer and raise the spool holder so it does not interfere with the sensor. This was designed for use with a direct drive modified…
Potential Spoilers for Star Wars Andor Below This is my take on Maarva's funerary stone from the final episode of season one of Star Wars Andor. Dimensions are approximated based on reference images and the text used is the Bazeese script…
I updated my V0.1 to the new V0.2 bottom Z endstop and had an unsightly hole in my back panel where the switch used to pass through. I decided to remix samwiseg0's NTC100K thermistor mount to fit in that space and cover the hole while…
A bowl/nest for the egg tokens from Stonemaier's Wyrmspan board game. Inspired by basalt columns such as the Giant's Causeway in Northern Ireland. There is a small one designed to fit on smaller printers (mine was printed on a Voron V0)…
This is a case I designed after watching Nero3DPs video on using a Pi Pico for input shaper. You will need 4x M2 self tapping screws to close up the case and then an acceptable wiring loom (an ethernet cable will work great).
Print these pads in TPU with 2 walls and 10-20% gyroid infill. They should insert into the kyber crystal case easily and will hold the crystal nicely for display. Black TPU is best as these are intended to blend into the original case and…
I was inspired by Elothan's https://www.printables.com/model/272115-knurled-m3-m8-thumbscrews but I wanted some which would look right on my Star Wars themed Voron V0.1. These are all meant to be printed with the hex side down and require…
All parts are designed to be printed in the orientation they load into the slicer. You will likely need supports for the battery holder but maybe your bridging is up to the task. Printing The crystal should be printed in something…
These models will allow you to convert the useless (and detrimental) chamber fan in an original Anycubic Photon resin printer into an activated carbon air filter. The goal here is to not vent the resin fumes at all but to capture them in…
Print settings were 0.2mm, 0.4mm nozzle, 3 walls, 5 top and bottom layers, 40% adaptive cubic infill. I used the octogram spiral bottom infill pattern as well. These parts were printed in ABS and the hole sizes work accounting for the…
The standard magnetic latches on the Voron V0.1 have screw holes too narrow for utilizing no drop nuts in the frame. Unfortunately you make the decision to use no drop nuts early in the build and it is very difficult to undo their use…
This is a small case I designed to attach to the exterior extrusions of an Ender 3 to hold a Rasberry Pi Zero W. The case requires 4 heatset inserts and 4 M3 bolts. It has slots to allow for the dupont cables, the camera ribbon cable, SD…
Brandon Sanderson's Year of Sanderson Kickstarter rewards have been really nice so far. The Sel (Elantris & Emperor's Soul) box has this really nice set of forger stamps with 2 stamps, ink and wax. The storage boxes are fine if you just…
These handles are designed to mount onto the acrylic top of resin printers to allow easy removal. The side handles are angled for a better ergonomic feel and the rear handle is a lower profile handle. They can be used interchangeably in…
Needs an M3 button head screw, an M3 heatset insert into the tower, and zip ties. Mirror the strain relief tower if you want to use the molex microfit instead of the white minifit.
I really liked Wusaweki's nozzle tray with the hexagonal springs but I wanted a box with a lid and labels so I remixed the design into a more traditional nozzle box. The box has 10 slots each for 0.4mm, 0.6mm, and 0.8mm nozzles with half…
I designed this mounting bracket to hold a Triangle Labs filament runout sensor on the top extrusion of an Ender 3. I previously had a BTT smart filament sensor on this printer but decided to move it to my Voron V2 and replace it with a…
Individual tiles are sized proportionally to the note or beat that is depicted on them. Students can use these tiles to learn about rhythm and meter and gain a better understanding of how long or short certain notes are. 3D PRINTING…
With the release of the v2 of the BTT smart filament sensor I saw that it had a button/plunger for easier loading of flexibles. This has been a pain on the current v1 and looking around I saw that FNM on Thingiverse had a mod to add a…
Suggested to treat as single use due to issues with cleaning 3D prints after use and keeping them food safe. I printed mine in natural PETG.
Remix of https://www.thingiverse.com/thing:4336908 Changes from original design Updated to use heatset inserts instead of captive nuts or cutting threads into plastic Added an adjustable BL Touch mount Added a carriage clip to the rear…
This headband/helmet was made for an elementary school aged child. It should be able to be scaled up to adult sizes pretty easily as only really the headband should need to be changed. To build this costume piece you will need the…
Suggested to treat as single use due to issues with cleaning 3D prints after use and keeping them food safe. I printed mine in natural PETG.
I designed this based off some injection molded ones I got from Home Depot which cracked and fell apart after only one season. I printed these in PETG with all walls and they have been on my gutters for years with no issues.
My brother has a 1984 Alfa Romeo Spider which had a damage heater switch cover. Using some pictures and the damaged piece we were able to make a replacement part which can be made entirely with a 3D printer or can be made in combination…
Hardware Needed 12x M3x5mm Bolts 12x M3 Heatset inserts Slicer Setup This model uses slicer modifiers to print so setup in your slicer is critical. Import one of the main body parts (20mm or 40mm height) and then right click and add a…
This soap dish was inspired by the epic soap making seen from The Slow Regard of Silent Things by Patrick Rothfuss. Print with flat side towards build plate, I think Hilbert curve may look really good for the top infill for the gear but…
Background This shadowbox is heavily inspired by the artist Lark Anne Art and their piece they posted on Reddit . I've been staring at this as a background on my computer on and off for a year and thinking it work be a nice shadowbox, so…
These are all currently available results.
