Counting matching models…
This is a modified version of TheSin's PCB36 mount for Steath Changer and the Nitehawk36 toolboard PCB, for use with a modified version of the Stealth Changer backplate I removed the extra holes, and shifted the extruder mounting holes,…
I used https://www.printables.com/model/140094-monster-tail-rainbow-loom as an inspiration This remix just has stronger thicker loom pins, as my kids kept breaking them Printed at .16mm layer height with a .4mm nozzle and .6mm line width…
Prints with no supports .2mm layer height 20% infill 4 wall layers Should print with ABS or ASA, but seems to work well with just PLA I used a single Voron heat set insert on the back for the clamp bolt
This is a modified version of the Anthead Stealth Changer backplate, but with an extended pad for the PCB mount This works in conjunction with the modified PCB board I made here:
I found the stock LK5 bracket to be less than ideal, so I used the model to generate a new version. It includes radiuses where applicable for strength, as well as tapered hole tops for ease of printing Recommend using supports underneath…
I needed a wrench to grab the bottom of a Lippert TPMS sensor The kit came with a wrench, but I didn't have it handy Here is a model, so you can print extras Printed in PLA with very basic settings, there should be enough clearance so…
Picked up an APUS 2 extruder, but could not find any adapter to use it on my Voron steath changer This mount is a 5mm thick plate, that bolts to the APUS 2, and allows you you bolt to the Anthead The cut out in the rear allows wires from…
This is a simple low profile mount for a common 3007 fan for a Raspberry Pi, to mount on the back of a Nitehawk 36 USB board The fan clips cleanly in with no screws, and the mount is mounted through the standard mounting holes, making it…
I had seen other examples of well designed handle bar ends, but my kid's bike had a smaller inner diameter. Redesigned with a bigger, 32mm diameter plug, but with a 14mm ID tube for my 15mm ID handle bars
This is a PEI stop that is 17.5mm in height, compared to the origina 20mm height I had originally sanded down mine for better nozzle clearance, until I shaved the original model down
These are all currently available results.
