Counting matching models…
Please hit LIKE on my design if you download it so I get credit, thanks! This is a counter top enclosure designed to hold a 1602 LCD display run by an ESP-32 processor. There is also a spot for a LoRa transceiver. Fits these parts: ESP32:…
Remember to hit LIKE on my design if you download it so I get credit, thanks! Yet another cigar ashtray! Check out all my ashtrays: https://www.printables.com/@geokscott/collections/1050149
If you please, hit LIKE on my design so I get credit, thanks! Several basket sizes currently available: width / depth / height / thickness 300x250x150x3 mm 200x130x65x2 mm 150x80x50x1.5 mm 175x145x80x3 mm 204x204x76.2x3 mm This is a…
If you LIKE this model PLEASE hit so I get credit, this will encourage me to make more models like this, thanks! Case for the LILYGO LoRa32 V2.1_1.6 Board and 18650 LiPo Battery. I used this is for the MySondy GO Project:…
Remember to LIKE so I get credit, thanks! NEW Version 2. Parametric Box. You can adjust the dimensions as needed. If you don't have Fusion 360, let me know what you want and I'll create the model for you. I found some bugs and corrected.…
A nice cigar ashtray with embossed "I Smoke Cigars and I know Things" saying. Should be used to make a mold and actual ashtray made from a non-burning material, or print in a very high temp material. UPDATE 12/9/2023: I centered the text…
I needed a minimal light weight add-on to carry payloads. I suspend my package under the drone with light weight nanobraid fishing line. This clip snaps onto the bottom of the drone exactly at the center of gravity. It has a 4mm smooth…
These shelves fit the HSW. They are two sizes 200x130 mm 150x80 mm They fit the baskets I designed here: https://www.printables.com/model/1025468-honeycomb-basket-2-sizes-hsw Suggest: No supports, 3 perimeters, 0.25 layer height, 15%…
(Similar to my case with battery: https://www.printables.com/model/922494-mysondy-go-case-ttgo-lilygo-lora32-v21_16-board-18 ) Case for LILYGO LoRa32 V2.1_1.6 Board only. No battery, intended to run off USB port. Board:…
This is a Hummingbird Feeder as the title says. Holds about 400 grams of 4 to 1 sugar water mixture if you use the recommended container (Girard's salad dressing bottle https://girardssaladdressing.com/). Look online for details on the…
I designed this super light weight payload holder for the Mini 4K to carry loads suspended with two lines to keep the payload from twisting. I printed with PETG 100% infill, 3 perimeters. It snaps in place at the center of gravity. I have…
If you LIKE this model PLEASE hit so I get credit, this will encourage me to make more models like this, thanks! These clips fit my “generic” 7 inch aluminum rain gutters in California. Lot's of gutters out there, these have a 16mm lip on…
I wanted to control the tilt of my 2" venetian blinds through Home Assistant using ESPHome. My first setup was using a 28BYJ-48 stepper motor which worked but is was barely strong enough for the job. I had to use gear reduction to power…
NEW BETTER VERSION HERE: https://www.printables.com/model/1451414-round-container-bayonet-mount-twist-on-lid-or-klee This tube fits most car cup holders and holds standard square box tissues. I have not tested, but other tissues might…
This bracket holds a 28BYJ-48 Stepper Motor and AS5600 12-Bit Magnetic Position Sensor together for testing and experimenting. Update: Turns out all stepper motors are not alike. I created Version2. V2 has the magnet 2mm closer to the…
This is a hand grip I made for holding a yagi antenna. The mount is 13.5 mm and fits in a typical 15mm square tubing boom. The antenna in the picture is this one: https://www.amazon.com/gp/product/B083GG3ZQ6 You can glue or screw the…
Car tissue holder that fits into a car cup holder. Uses tissue from a standard box. 82mm outside diameter, 200mm tall. Has a solid lid option if you want to use it for something other than a tissue container. This fits in our Honda Accord…
This dog bowl stand/riser has a 116mm od lip. It tapers out to 140mm at the base. My bowl pictured has a lip that snaps perfectly in place on this stand. it should hold any bowl with a lip between 116mm or slightly larger. I printed in…
Remix of @Tom_62253 excellent Stevenson Screen. I wanted the base to be a little more lighter weight and specifically hold a DS18B20 temperature sensor. I also wanted a simple wall mount to screw it to a flat surface. Fits this sensor…
Build your own filtration kit from cheaper parts. I modified the Advanced Filtration System Bracket to fit the following fan and filters I sourced from Amazon for a nice savings. Fits this filter $9/ea:…
Brackets for making a Yagi antenna. Fits square tubing boom and round stock for elements
Version 1 of this hand grip is here: https://www.printables.com/model/984190-handgrip-hand-grip Both mounts fit either grip This version is a smaller version with a slightly tapered tale. I find it more comfortable. I made this grip to…
EFHW antenna base. 4mm screw holes. 6mm support holes Fits this toroid: https://www.amazon.com/dp/B084LVGZ9Q Has optional ground connection hole and counterpoise hole. My personal design uses a counterpoise and I DO NOT connect it to…
How to use the tools video: https://youtu.be/PJnoJSMHrW0 I did a lot of trial and error to get this design perfect. The small clip pops right out with no effort. The larger clip is very stiff and takes a lot of force, but this tool fits…
This is a mounting bracket that holds a JSN-SR04T ultrasonic sensor and waterproof DS18B20 temperature sensor for mounting to a 1" square tube. This is part of a project to measure the water level of a creek. The sensor will be extended…
This is a replacement thread guide that fits the Brother Lock 1034D Serger. It may fit other models. The post that fits into the vertical tube is 7.5mm diameter. The bars press fit into the hub. You could glue them, but it's not really…
Case for HM3301 laser particulate PM2.5 air sensor and ESP32 board. I use this to monitor my indoor air quality via Home Assistant. I programmed the ESP32 with ESPHome and run the ESPHome add-on in my Home Assistant. Really easy to setup.…
THIRDREALITY has several sensors that are all 2.2" x 2.2" x 0.48" I have several of these THIRDREALITY Zigbee Temperature and Humidity Sensor Lite's and needed a way to mount them without permanently sticking them to a surface. So I made…
Another desiccant box. Sturdy design, snap on lid, lots of vents, holds lots of beads. Recommend printing with 4 perimeters in PETG. I'm able to put the whole box in my dehydrator oven for several hours with no problems. There is an…
This holds the REYAX RYLR998 LoRa radio, for potting. Fits in a 18mm hole, has a slot for a 17mm O ring. Part of another larger project. This will be mounted to the top of a weatherproof box outdoors, with other electronics. Radio:…
For all the loomers out there. Pin to peg the loom strings
Pet food bowl riser. Elevates you pets food bowl off the ground. Raises dog/cat bowl 90mm and fits bowls with approximately 110-116mm diameter lip. I printed in PETG, PLA would be fine also. You can print hollow or with minimal infill, it…
Mold for casting concrete cigar ashtray I made a second mold with 5mm walls to reduce the size. I also included the mold positive in case you need to make a mold from the original.
I use these to wind up my arborist throw lines for stringing up my antennas for POTO and SOTA activations. Photos show 80 feet of cord wound up.
Fits Android Galaxy Note 20 Ultra with Spigen case. For mounting Mysondy Go box to phone. Glue the top clip in place. Fits my MySonde GO case: https://www.printables.com/model/922591-mysondy-go-case I made this to mount my MySondy GO box…
I love making cheesecakes but always found it hard to find the right thing to easily and evenly tamp down the cracker crust. So I make a tool to make the job super fast and easy. It fits my 6x3 and 9x3 inch spring form pans perfectly. I…
I wanted some battery operated lamps for emergency lighting around the house if and when the power goes out. Everything I could find was way to expensive or didn't run on 18650 batteries - of which I have a ton of laying around. So I came…
I don't like the mess of putting peanut butter in my trap directly, so I made these bait trays so I could easily fill the trays then insert them eliminating the need to clean the inside of the trap of old peanut butter. I have extras so I…
Simple cover for Victor or similar rat traps to keep the rat in the kill zone. Easily slips over end of trap. Has small hole on the sides to tack it or screw it in place, but usually just slipping it on works fine. Note the ledge deep on…
This bracket is for mounting the Somfy Eolis 3D RTS Wind Sensor to the rail of a Sunsetter awning. There is really no flat level surface on the Sunsetter awning rail to mount this sensor, plus I didn't want to drill holes in my rail. So,…
These are all currently available results.
