Counting matching models…
A pottery clay tool designed for quick and precise cutting of clay at 30°, 45°, and 60° degree angles. Things you will need: 4x 4-40 brass heat set PEMs 4x 4-40x.25in screws An old guitar string or stainless steel braided wire both work…
This is a printable wall mounting bracket for a Samsung soundbar. Instructions for installation: Attach brackets to soundbar using M4 socket head screws. Hold soundbar centered, beneath tv, 1" lower than where you expect to have the…
A simple tool for trimming a foot for pottery
These are clay handle forming jigs for mugs, jugs, vases etc. The jigs come in all different sizes and shapes. Use the split object function in prusaslicer to choose which you'd files you'd like to print.
This is a hydroponic basket that fits this model. https://www.amazon.com/gp/product/B08TTSD78F/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
This adapter is to convert a 3.5" drive to a 2.5" form factor. This mount is meant to be super rigid when assembled. M3 x 6mm screws work well for mounting the SSD to the adapter.
This model is a golf tee cigar holder. Place your golf tee inside the main print and then use a hex key or flathead screwdriver to tighten the small print, which secures the golf tee into the base.
This design is for a pottery scoring tool. There are two models available. One model allows you to insert finishing nails as the tip for the scoring tool for higher durability and the other is entirely 3D printed.
This is a printable tool for accurately bending an IC chip's leads, so that their legs are straight and perpendicular to the body of the chip. This allows for chips to be easily placed in their respective sockets. Simply slide the chip…
This SSD adapter was 3D printed to accommodate a standard sized SSD drive and give it the exact footprint of a full size HDD. This can be used for all hot-swap bays usually found on a server type chassis, as it will fit the form factor of…
This model is used to mount two SSDs stacked, with enough separation that the power cables don't aggressively bend on one another… like other models I've tried before. The model is also meant to be very rigid when assembled. M3 x 6mm…
A tool to set a consistent base thickness for cups, pots or bowls while throwing on a wheel.
A DeWalt Router circle cutting jig that allows quick circular cuts of many different diameters. You can place a nail or screw into the small hole and cut a perfect circle. The markings on the jig represent the final diameter, not the…
This is a replacement Ninja coffee bar measuring scoop. It fits in the side of the Ninja for measuring ground beans. Print Settings Printer Brand: MakerGear Printer: MakerGear M2 Rafts: Doesn't Matter Supports: Yes Resolution: .2mm…
This brake reservoir cap was made for a Chrysler Pacifica, but may work with many other makes/models
A pottery clay tool designed for quick and precise cutting of clay at 30°, 45°, and 60° degree angles. Things you will need: 4x 4-40 brass heat set PEMs 4x 4-40x.25in screws An old guitar string or stainless steel braided wire both work…
A simple, yet convenient tool for checking the 60 degree angle on lathe thread cutting tools. Additionally a 55 degree angle check is added for special threads, and markings along the sides indicate thread count per inch. Category:…
A simple tool for trimming a foot for pottery
E-Stop shroud for industrial-style e-stop
This is a jig to add bat pin holes for your pottery wheel head. Use the holes that are farthest apart for the standard 10" bat pin spacing.
These gauges allow you to quickly slide them over a specific size of PEX, CPVC or Copper tubing to check the insertion depth and mark it. This way you can cut tubing to the perfect length prior to inserting a PEX fitting.
A jig for cutting horizontal slices from a slab of clay. One side has .25" spacing and the opposite side has .375" spacing. Print 2x and use a wire across the slots in the print to cut the slab.
Calipers that are used to find the center of an object. They have a max opening distance of nearly 18.5" The smaller legs need to be printed with support material. These calipers require the following hardware: 1x 8-32 x 5/8" Button head…
Clean/Dirty Dishwasher Magnet that indicates the status of your dishwasher by simply spinning it. Superglue a .375" x .125" neodymium magnet into the back.
This pool cue crown allows you to press it onto the end of a normal pool stick, or attach it permanently to a dowel rod.' This crown is unique because it can be placed directly over a ball without contacting it.
This is a "Mind Your Head" sign I made - Simply use PrusaSlicer's filament change command (or the auto command that pops up) to create the dual color print.
A rib that looks like a razor... Because why not?
A simple print to mount a dual USB extension to 20mm extrusion. I made this to access the internal USB from a Raspberry Pi running Klipper, from the outside of my printer. Mount the Dual USB extension to the print using 3mm x 8mm SHCS…
My glass arrived broken so I made this - it cost about $9 in materials. The model can be printed on large printers like the Neptune 3 max or Neptune 4 max. The 3D print uses a sheet of polycarbonate (lexan) for the top window that is…
A quick remix of othe Ford Expedition key fob faceplate to include hole for the alarm button. Use support for keyring
Mostly exact copy of a Seadoo Speedster 1996 carburetor cover clip.
Replacement Wipe-Down Blade for 2" Uline Tape Dispensers. I printed it from PETG to allow it to flex without breaking when pressing down on a box or tape.
This is a BT30 style holder for the Tormach TTS Probe. It mounts directly to the side of the control cabinet and utilizes the existing screws.
These are all currently available results.
