Counting matching models…
I couldn't find the 90-degree adapter for the Bestway Power Steel pool so I made one. The threads for the connection for the pool seem to be non-standard so I custom-made the threads. The threads are ~109mm in diameter. The 90-degree…
Simple drain plug for the bath tub. Dimensions: Bottom - 40mm Top - 70mm Printed with TPE, no supports should be required but I did use them form the build plate only Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No…
UPDATE Nov 01, 2021 I've had issues trying to print these with PETG. I've changed the cylinder and piston to be oval so there is less overhang in the clearance area between them UPDATE - Feb 24, 2021 Uploaded a V2 version with more…
Handle broke, I made a new one 100mm long Print Settings Rafts: No Supports: Yes Resolution: 0.2 Infill: 30 Filament: Any PETG or ABS Any Category: Containers
Hole in the end to allow for air to escape. Print as it stands, it is designed not to need supports on the inside Print in TPE
Designed for 11.5mm pens. Contoured for easy grip and carrying.
This tractor is not meant for young boys. This part broke fairly quickly and instead of buying a new part I created this in Fusion 360. Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: Yes Resolution: 0.2…
These are $20 bucks on amazon but why buy when you can print! Extended downspouts to reduce water pouring on to your trailer when it is raining because the original spouts are too short. Also reduces black marks under the downspouts. 20mm…
Quick to print dustpan. Designed to slide onto a 22mm broom handle. Print in PETG or ABS for durability.
This is a compatible replacement part for Bruder part number 44004. Used in John Deere and Massy Massey Ferguson, and possibly other tractors with a loader. Category: Mechanical Toys
Print in a light color with PETG. Print with 4 (for 0.4 mm nozzle) perimeters so no infill is used in the walls. No supports required.
The lampshade is made to be printed in Vase/Spiral Mode in your slicer. Dimensions Top: 220mm Bottom Hole: 36mm Print Settings Printer Brand: Creality Printer: CR10S PRO Rafts: No Supports: No Resolution: 0.12 Filament: Any PLA Any Notes:…
This is based on the John Deere 7930 Loader and is not compatible with either piece of the Bruder part (42000 Front loader arm 1-B14), but it is a replacement. Both parts will need to be replaced. It is compatible with all other parts of…
The original one never quite fit right so I remixed it and extended the tabs to make it easier to take on and off. Forks can be downloaded from https://www.thingiverse.com/thing:2656090 Category: Toy & Game Accessories
For those of us still too cheap to buy wireless headphones/earbuds. Start with the earbuds in the center and position the chords through one of the openings then begin winding. Once short enough to reach across, bring the connector in and…
Requires 2 * 6201RS bearings. The spool is held in pace by friction, and I have not had any issues with slipping to this point. Parts of this were reused from my spool holder . I printed in PETG with no supports on any of the pieces,…
My kids broke yet another part of the hitch assembly so I've created it from measurements in CAD. We only have a dump wagon so it has not been tested with any other components. They've also lost the plastic screw which raises/lowers it,…
This tractor is not meant for young boys. This part broke fairly quickly and instead of buying a new part I created this in Fusion 360. Not very detailed, as the original is but it's good enough for a functional part and my boys don't…
You bought all of the filament dryers so I needed to make my own out of a Salton VitaPro (DH1460). My Ender 3 bed is too small to print this in one go so I split it up. Print 3 to get the full circumference. No supports or other parts are…
Kids broke the bucket where the forks attach so I created this one in CAD to reinforce the connection. I've placed cut-outs on the front of the interface so that it is easier to attach and remove. I've also angled the tabs on the back for…
I'm not sure if sponge filters are standard but this one works with the Hydra Aquatics filters. Printing Supports under outer ring are required. Dimensions: Top (clear tube outer diameter): 20.5mm Bottom (connection to the structure…
Compatible with 42107 Mounting plate for CAT and JLG telehandler 1-D03 Requires support from build plate. I was able to bridge everything else. Category: Toy & Game Accessories
My kids had a hard time pulling the original design when the tub was full. I've added a ring that is pliable and will pull upwards, giving a firm grip and making it easier with the weight of tub of water. Must be printed with TPE/TPU to…
Quick Attach for Bruder loaders, compatible with 44002 Deflexion front loader Category: Mechanical Toys
I couldn't find the part I needed to connect a 1 inch solenoid valve to my 1.25 inch pool hose. Since Fusion can't make NPT threads, I pulled the design from McMaster-Carr with the correct size NTP threads, and modifed the outlet for 1.25…
Wanted something simple to hang my headphones on my new standing desk. Screw holes are 5mm, Screw head is tapered to 8.5mm with a 45-degree angle to recess the screws. Opening is 20mm. Print Settings Printer Brand: Creality Printer: Ender…
Requries 6-8mm (width) by 16mm (length) bolt with 8mm locknut
Bucket Hinged Forks for telescopic loaders compatible with Burder part 42145. Works for John Deere and Massy Furguson and probably more Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: Doesn't Matter Supports: Yes…
This tractor is not meant for your kids. This is only the first thing my boys broke on this tractor. Instead of buying a new part they'd break again anyway I created this in tinkercad. Print Settings Printer Brand: Creality Printer: Ender…
Infinitely adjustable shower head holder for the vertically challenged. Both pieces snap on to hose at any position and can be left on when the head is returned to its normal position. There is a print-in-place swivel hinge built into the…
API Freshwater Aquarium Salt Measure Spoon Designed specifically for API freshwater salt measurements. Extra-long to reach the bottom of the carton. Will print on Ender 3 size beds. 1 tbsp / 15 ml for 20L / 5G 1/2 tsp / 2.5 ml for 4l / 1G…
Picnic table cloth clamp to keep the table cloth in place. Includes a hook for garbage bags or anything else. Standard for North American tables 47.5mm or 1.8" table width.
This tractor is not meant for young boys. This part broke fairly quickly and instead of buying a new part I created this in Fusion 360. Not very detailed, as the original is but it's good enough for a functional part and my boys don't…
2 piece pail handle. Print both separately and standing up as they are. The 2 pieces friction fit with a locking nub to keep it together. I've included a 0.2mm tolerance. Assembly: Place the pail wire in the handle of the slot all the way…
Wheel replacement for Rubbermaid Garbage can 105mm X 38mm Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: Doesn't Matter Supports: Yes Resolution: 0.2 Infill: 20 Filament: Any PETG Any Category: Containers
Replace or additional track for Hexbugs https://www.hexbug.com/
One of my camper downspouts was draining directly onto the tip-out awning and causing it to fill with water and sag. This spout takes the water further along the trailer and dumps it off the side. Print Settings Printer Brand: Creality…
Avoid surface discolouration under plant pots due to moisture build up. Designed to fit on a 230x230mm bed. Scale as requried.
Much wider than the originals. Print in ABS or PETG
Refined my remix and added a BL Touch mount. I don't have a BL touch yet so it is untested Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: Yes Resolution: 0.2 Infill: 30 Filament: Any PETG Any Category: 3D…
Screw compatible with the loader screw in the 42106 pack. It has one flat side that does not affect operation and allows for printing flat in a stronger orientation. Supports are still required for the parts of the shaft that are not…
Print with 2 perimeters and 10-15% infill to allow for some flex. ABS or PETG
Overview I was sick of searching for the tape when wanting to print PETG on my glass bed. It has 3 rollers that you squeeze together to push the tape on. The rollers are Print in Place, which is why supports are needed. Holds a standard…
Seachem Syringe Top Pop into the top of the bottle so that you can easily use a syringe to withdraw a set amount of fluid with a syringe. Liquid-tight and can invert the bottle. Can stay on under the cap. Easily remove and move to another…
Jacuzzi compatible pillow bracket and slider. Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: Yes Resolution: 0.2 Infill: 20 Filament: Generic PLA Silver Category: Outdoor & Garden
These are all currently available results.
