Counting matching models…
If you find my designs useful, please consider sending a tip UPDATE: Thanks to design adjustments by DryFly when trying to print his own on an Ender 3 with built-in tabs, I have updated the design to just 2 variants, both with internal…
Remix of YasiekPL's Voltometer probes hanger to fit the FNIRSI 2C23T multimeter. Update DEC 2024 : 2nd version with enclosed probe area added. Attach with good double sided adhesive (3M Core etc) Print standing up using tree supports or…
Remix of the Dew shield from SeeStar S50 Accessory Set by Lordwhiteley to support the mask/defraction spike clips from the ZWO Seestar S50 (Lens cap, Levelling pads and accessories set) by All-Pixels . I'd already printed All-Pixel's kit…
If you find my designs useful, please consider sending a tip I recently mounted my GeForce RTX 3080 vertically in my Corsair iCUE 4000X case using the Linkup PCI-E 4.0 Riser Support cable but I was concerned about how much the Riser's PCB…
If you find my designs useful, please consider sending a tip Original clip broke on one of these generic water bottles, new replacement designed. Print Settings: Quality: 0.2 Infill: 100% Brim: Yes (Personal Preference) Supports: No…
Remix of Tom_DD's "5.25" DVD/Blu-Ray Drive Enclosure/Sleeve" to accommodate a Vantec NexStar USB 3.0 to SATA 6Gbps Optical/Storage Adapter. Full and Bottom sections modified, Top part is the same as original but included for completeness.…
If you find my designs useful, please consider sending a tip I needed to install a XFX Radeon HD 5450 into a tower PC but the card originally came with a low profile/SFF bracket. The card also took up 2 slots as the VGA port was on a…
Remixed the original to add the Corsair triangular holes to match the PSU basement cover 3 hole styles available: Style 1: Small Triangle Holes Style 2: Large Triangle Holes Style 3: Large Triangle Holes - Alternate rotation Also included…
If you find my designs useful, please consider sending a tip UPDATE: Dec 2024: Fixed the messed up HotasX_ExtensionBaseStreamDeckHousing_v1 model! Original blurb from 2019: I have remixed the excellent "Thrustmaster HOTAS X T.FLIGHT…
If you find my designs useful, please consider sending a tip Replacement clip for the Pet Voyager 200 Cat Carrier. I added re-enforced areas which the original don't have to stop it snapping at the weaker points. Can be printed in PLA but…
If you find my designs useful, please consider sending a tip The coin tray on my 6"/150cm wide Helix Cash tin broke, so recreated it in Tinkercad. Print Settings: Quality: 0.2 Infill: 40% Brim: Yes (Personal Preference) Supports: Yes -…
Remix of dingobingo_yt's " Cable Tray Ecoflow River 2 Pro Powerstation " to fit the smaller Ecoflow River 2. Print Settings Printer Brand: Creality Printer: Ender 3 Pro **Rafts:** No Supports: No **Resolution:** 0.2 Infill: 40…
If you find my designs useful, please consider sending a tip This is a simple holder for an ATX/ PC Power and Reset button and also Power and HDD activity LEDs. Dimensions are 48.5mm x 13.5mm x 10mm I recently built the awesome "poor…
If you find my designs useful, please consider sending a tip Somehow lost one of the domed clips that holds the boot scuff / landing plate in place, had absolutely no luck finding any online or even figuring out the correct name for the…
Remix of AstroStock's 2pc Tripod Leg (51mm or 2in) Bracket to allow attaching the ASIAIR by it's dovetail for easier removal of the ASIAIR from the tripod leg. Print Settings Printer Brand: Creality Printer: Ender 3 Pro **Rafts:** No…
Remix of wizalex's HEQ5 44mm Tripod Leg Holder to fit 50mm / 2" tripods like the Celestron CG-5 / AVX etc. Also removed excess material in the centre. V1: Original remix with hex-shaped hole. V2: Changed central hole to round to be better…
Print Settings: Quality: 0.2 Infill: 40-60% Walls/Perimeters: 4-6 Brim: Yes (Personal Preference) Supports: Yes Material: PLA
If you find my designs useful, please consider sending a tip The standard backet that comes with the ZWO EAF (Electronic Automatic Focuser) wouldnt line up with the mounting holes on my Astro Essentials SCT Crayford due to the large…
If you find my designs useful, please consider sending a tip Remix of jggall01 's Fine Focus Knob to fit the older Black Celestron SP-C8 tubes with the metal focus knobs and to give it that honeycomb effect everyone seems to be doing for…
If you find my designs useful, please consider sending a tip Update: Connectors are now slightly wider and thicker and should be a snug fit. Custom Elite Dangerous version of my Corsair iCUE 4000X Front Panel design showing the 3 base…
If you find my designs useful, please consider sending a tip Remix of my CopyMaster spool Centre to fit eSun carboard spools. eSun filament on cardboard spools have hollow centres. This means, for those of us with bearing-based filament…
If you find my designs useful, please consider sending a tip ASIAir Pro bracket for the Ugreen 10Gbps M.2 NVMe SATA SSD Hard Drive Enclosure . Ideally for mounting on the side holes. 2 verisons, 1 with offset holes, if like me, you're…
If you find my designs useful, please consider sending a tip Replacement accessory tray bracket for square legged Equatorial mount tripods (Meade 4500, older Celestron and Skywatcher EQ Tripods etc) Our astronomical society received a 5"…
If you find my designs useful, please consider sending a tip Needed a replacement IO shield for the MSI MS-7366 (P6NGM-L) VER 2.2 motherboard so designed this one. 2 versions included with and without the MSI logo (logo correct to the era…
If you find my designs useful, please consider sending a tip . Update Nov 2025: Added a 2nd version which has recesses for adding an o-ring - Images online seem to show early versions of the mount used an o-ring, later ones like mine…
If you find my designs useful, please consider sending a tip Replacement battery cover for the Vtech Challenger Laptop Print Settings: Quality: 0.2 Infill: 20% - 40% Brim: Yes (Personal Preference) Supports: Yes Material: PLA Print…
If you find my designs useful, please consider sending a tip The original jaws broke on my Meade LX200GPS's autostar holder long ago (Meade part no 07580), and were since lost. I found a half of one of the original jaws when clearing out…
Remixed alienlifeform's "Astro A50 Gen 4 Headband ReMixed" to make it wider, as I wanted to apply a longer foam pad. Extended the length of the headband to accomodate the longer pad. Re-enforced the top, as where the A&B parts clipped in…
A remix (barely!) of Unistellar Evscope leg clamp dust cap holder by loykastj. Removed the eyepiece cap holder for the Evscope Equinox 1 & 2, which have no digital eyepeice.
Remix of Vixen 102M Replacement Focus Wheels by Ratlet Ratlet's version was solid on both sides whereas the originals are hollow on the inside. Ratlet's wouldnt fit correctly on my 4" vixen Refractor with the original screws, so remixed…
If you find my designs useful, please consider sending a tip An adaptor plate for the stock Meade StarNavigator & DS-2000 series telescopes. Allows using the standard finder scope mount to mount a vixen style finder, without removing the…
Remixed the original to accommodate a 90mm LED ring light, as well as allow me to still use the privacy shutter I already had installed on my C920. Created some diffusers of varying thicknesses to make it less blinding, printed in…
The original upload by bowiesjustaknife was a .step file of the base including a representation of the the bubble level, so no good for slicing/printing with Cura etc, UPDATE: bowiesjustaknife has finally uploaded a proper STL, minus the…
This is a remix of the base piece from MichaelPollack's 2 piece Forbidden Desert Twister. I increased the peg diameter to 10mm to make a snug fit in the twister piece base. I tried to use the original base model but it had a partial ring…
Remix of my ASIAir Pro bracket for the Ugreen 10Gbps M.2 NVMe SATA SSD Hard Drive Enclosure and the Support extender WIFI Vonets - ASIAIR pro by mat05100 . Ideally for mounting on the side holes. 2 verisons, 1 with offset holes, if like…
If you find my designs useful, please consider sending a tip TechnologyOutlet now supply CopyMaster filament on cardboard spools, which have hollow centres. This means, for those of us with bearing-based filament holders, there's nothing…
This is a remixed wall hanger for either of these versons of Percy Jackson Riptide sword: Riptide - Percy Jackson's Sword Percy Jackson's Riptide Sword Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: Yes…
If you find my designs useful, please consider sending a tip UPDATE June 2025: Added an updated v2 of each bracket which fits better against the battery cover, raised the sensor screw hole as it was pullng the snsor forward a bit and made…
If you find my designs useful, please consider sending a tip I needed a corner bracket to attach a FloPlast Miniflo 50mm mini gutter downpipe to the side of my shed thought they'd be commercially available but apparently not so here is my…
If you find my designs useful, please consider sending a tip Quick and dirty remix of Callidus80 's charger cradle to fit a TerraTek charger and TTSB18-2 18v 1300MAh battery. Print Settings: Quality: 0.2 Infill: 20% Brim: Yes (Personal…
If you find my designs useful, please consider sending a tip Simple shower holder for most types of razors which can be attached to suction cups with a loop. PLA Plenty of infil to make the rod nice and strong (I went 100% as it hardly…
If you find my designs useful, please consider sending a tip An adaptor plate for the stock Meade StarNavigator & DS-2000 series telescopes. Allows fitting an alternative finder scope without changing the original finder mount. Print…
If you find my designs useful, please consider sending a tip Tripod Leg Holder to fit 38mm / 1.5" tripods like the Celestron Evolution tripod Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: No Resolution:…
If you find my designs useful, please consider sending a tip Simple dirt/dust caps for Anti-Roll Bar drop links on a car to stop the hex ends and nut corroding over time. Specifically designed for a 14mm nut, resize as appropriate. 3…
Modified to fit the Little Friends Landmark Animal Cage bars spacing and wheel spindle length/thickness. After printing my own, I recommend printing on its side and using supports, the STL loads in this orientation by default. This will…
If you find my designs useful, please consider sending a tip Simple dust cover for my wife's Giant Boulder Shimano FC-TX70 Crank, using the 8 mm hex fitting to hold it in place. Print Settings: Quality: 0.2 Infill: 100% Brim: Yes…
If you find my designs useful, please consider sending a tip The original clips on my folding picnic table snapped, so I designed replacements. I don't know the exact make/model of the table, it is the same as the last 2 images. The…
If you find my designs useful, please consider sending a tip An unused channel blocker for a sewage inspection chamber to stop unwanted "solid waste" getting stuck in the unused adjacent trough, when the water shoots out of the opposite…
Remixed from Ender3D's "Betray at House on the Hill - Organizer (& Baldur's Gate)" https://www.thingiverse.com/thing:3577659 or "on Cults3D" https://cults3d.com/en/3d-model/game/betrayal-at-house-on-the-hill-organizer-baldur-s-gate I…
If you find my designs useful, please consider sending a tip An adaptor plate for the stock Meade StarNavigator & DS-2000 series telescopes. Allows using the standard finder scope mount to mount a solar finder by using a standard "piggy…
3D printable medallion of the Great Raxxla Potato Hunt logo, originally created by CMDR N. ‘Rovmord’ Frye and reproduced here with permission. The colour image is for painting reference. "The Great Raxxla Potato Hunt is a survey of all…
If you find my designs useful, please consider sending a tip Remix of Drip Hose Funnel by mediaman Was getting sick of rear shock mounts on my 2008 Ford C-Max and 2010 Volvo S40 only lasting 2 or 3 years before the mounting lugs snapping,…
If you find my designs useful, please consider sending a tip This upload is affected by Thingiverse's Download All Files 404 bug, download the files separately here: https://www.thingiverse.com/thing:5141043/files The original power lead…
If you find my designs useful, please consider sending a tip Quick and dirty remix of Callidus80 's charger cradle to fit an Eckman charger and 18V EKLMC1B Battery used in the Eckman EKLMC1 18V Rechargeable Mini Tiller/Cultivator. Print…
Remixed the original file by Spuddy at MakerWorld to reduce the wall height on the left side, so you can still easily grip the mount handle without crippling your hand. I assume the Celestron Nexstar Evolution Mount is the same dimensions…
If you find my designs useful, please consider sending a tip I designed this replacement blanking plate for my ION drum pads. Print in the orientation shown in the screenshot from Cura (yellow object) and no supports will be required The…
If you find my designs useful, please consider sending a tip A dovetail bracket for holding the HitecAstro Mini Dew Controller . May also hold the HitecAstro USB Guider - (I don't have one of these but the case looks the same…
Remixed CaptainVTOL's original to mount on the top plate of my VTUIFBT HOTAS Desk Mount brackets (pictured) . Swapped the stock countersunk M6 12 screws with M6 20 due to the extra plate thickness. Included a straight and 2 angled…
If you find my designs useful, please consider sending a tip Adaptor to use a piggyback mount screw and plate in a dovetail mount. If the bolt is too long, put a nut on it on the inside Print Settings Printer Brand: Creality Printer:…
If you find my designs useful, please consider sending a tip I wanted a way to stop the top rotary dial (marked F) from moving on the Logitech x56 HOTAS Throttle and created this lock shim. Just slides under the dial and holds it in…
If you find my designs useful, please consider sending a tip I have a DAWAY C66 Bike Seat with built in LED rear light and i found my under seat bag kept bouncing against the on switch and turning the light on when off-road. This simple…
These are all currently available results.
