Counting matching models…
Replacement hammer for the Don't Break the Ice game. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: Yes Resolution: 0.2 Infill: 20% Filament: Hatchbox PLA Blue Notes: Tested in Cura. Supports with roof at a…
I pieced together a hotend for my Ender 2 Pro and the stock part fan duct would no longer work for my needs. I designed these ducts to replace the stock ducts. YMMV on if it'll fit your printer or not. There is a tall and short version.…
I needed to space out the Phaetus BMS hotend a bit on the Ender 3, so the silicon sock would be able to fit onto heatblock while still clearing the bottom wheel mount on the X gantry carriage. This part slips over the hotend standoff…
This is a simple remix of the cover from the original PanzerObserver2.4 camera mount. Check out the original design to see if it's what you need instead. I purchased this camera and it didn't need the extra hole that the original cover…
This is a toy key for the Melissa and Doug Vroom & Zoom Interactive Dashboard toy . In the photos, the real key is the yellow one and the print is the red. Print settings: Material: PLA Layer height: 0.2mm Infill: 20% grid Print with the…
This is a mount for the Arducam IMX291. I purchased the camera from Amazon here . The parts consist of a back cover, front cover, and a mount. 2 mounts are included. One mounts in the corner of two 2020 extrusions and one mount is for…
My son loves the Hot Wheels Super 6-Lane Raceway track, but he wanted to be able to race Hot Wheels monster trucks down it as well. I designed these risers for the finish line to lift it high enough for the monster trucks to pass…
This is a remix of the great Raspberry Pi Display 2 mount. It extends the mount to work with 0.5 inch drywall and makes room for USB-C power connections on the Raspberry Pi 5 if you aren't using PoE. I also thickened the magnet walls to 1…
I remixed the great LCD Enclosure design by eoyilmaz to make it standalone instead of mounted to the frame. Make sure to check which version you need. The files are named accordingly. Print with the back of the enclosure on the bed. The…
This is a tray for drying desiccant beads in a food dehydrator. I use a Presto dehydrator. I cut the bottoms of most of the trays out for drying filament spools. This tray fits within the rings. Drying at 74° C for a few hours seems to…
Update: I added a universal version of this adapter that shoudl work with the Yamaha YPAO mic. This version should work with both the Audyssey mic as well. It has a round base. The Audyssey calibration microphone used for Marantz and…
When installing an aftermarket Pioneer stereo head unit in my Ford Taurus, I wanted to use the OEM microphone location with the microphone that came with the head unit. This cover snaps into the OEM location and provides a mounting ball…
I remixed the great Satsana 5015 Ender 3 V2 for Phaetus BMS Hotend or similiar part to work on an original Ender 3/Pro and added an EZABL mount. Print it with the side that mounts to the carriage down on the bed and use supports only…
I wanted to add lights to my Sovol SV06, but I wanted a way to control the brightness of the lights easily. I found the SUPERNIGHT LED Light Strip Dimmer and created this adapter plate so it mounts securely to the front of the printer.…
Original: https://www.printables.com/model/78933-ender-2-pro-minimalist-hot-end-fan-mount This is a remix of the left mount for the minimalist hot end fan mount linked above for the Ender 2 Pro. It adds the EZABL mounts to the left fan…
I wanted to get an idea of the size of the different iPhone 13 models, so I created some blank mocks based on the specs that Apple provided. Really simple prints but helps to give an idea on the sizes. Print Settings Printer Brand:…
This is a mount for the 18mm TH3D EZABL sensor with the side adjustment screw.. The mount that TH3D provides in their STL pack does not work well with the EZABL sensor that has the adjustment screw on the side. The ring ends up covering…
This mount is for the metal case enclosed Arducam OV5648. I used this one . It will only work on the Switchwire if it is the enclosure is not used. there is not room for the front panels. BOM: 1 x M3 heat set insert (3x5x4) 1 x M3 6mm…
This needs to be used with the spacer for the Phaetus Dragonfly BMS hotend This spaces out the EZR Struder to be used with many common cheap direct drive upgrade kits for the Ender 3. With this spacer, it allows the EZR Struder to be…
Holder for the TH3D Studio MAX Cordless Turbo Fan Air Duster that mounts to a Honeycomb Storage Wall. Includes 4 places to hold attachments along with the air duster itself. STL should be orientated to print without supports. Print with…
These are all currently available results.
