Counting matching models…
**Update 2-Mar-2023:** Added 1" barrel NP5K Files. **Update 12-Jan-2023:** Added Gryphon 1.3 compatible files for solenoid and manual, which should be easier to assemble. Also added select-fire wiring diagram. This will likely be the…
Toploadable Magazine holders for Mini Slanted Talon Mag (Nightingale magazine). Belt and MOLLE versions are provided. Key dimensions are based on Flygonial's original design. At the time of posting, the belt version has not been tested…
EDIT 20231015 : Added Modular BCAR files and files for Momentum motors (Protostar). Recommend 30A 4-in-1 ESC or greater. The design accommodates mounting for 20mm square ESCs, but larger ESCs should fit in the housing. (Be sure to…
INTENDED USE: Print Domes, use plastic sheet (24" (circumference) x 14" x 0.020*" for walls. Use Printed Bracket to bolt the two tanks together using the ¼" holes, and ¼" EVA foam for the tank cross straps. * or thinner Backpack Straps:…
The tensioning shim snaps on/off and is retained when the mag holder is empty. Without modification, mags can be held in place if sayas are assembled tightly enough. Advise cutting an additional groove in smaller mags to match the…
Here's my P90 conversion for a Rival Charger! I've seen a few concepts and other similar bodges, but I figured I'd take some time to sit down and work it all out. It's mag-fed and full-auto, with 95% drop-in 3D printed parts. Most of it…
Use https://www.mcmaster.com/9452K6/ (Dash 016 Oring) for the BCAR. Use a 10mm tactile switch for easy select fire (optional) or just mount the Encoder on the Riser. You will need to route the encoder and display cables back to the lower…
Combined the two halves and removed the unnecessary joining Geometry. Decreased the logo gap to nearly flat to allow for painting
22-Apr-2021: Added version for use with drum magazine spring, requires some cuts to the shell. Replica of a stock follower. IF you want it in a different color or something I guess.
3d printed accessories for Dark Voyager from Fortnite. Scaled to approx. 6' tall person.
Summary If you need this printed for you, let me know and we'll see what we can do! EDIT 01052020: Added alternate mag plate to remove confusion surrounding implementation. Still recommend original to achieve minimum thickness. Cursory…
Remix of file on https://www.thingiverse.com/thing:5954410 . Version created around build guide V5, 12 May 2023. Magazine Tubes: Holes along the length to check remaining shells. Holes are also MLok for accessories, but screw must be…
I like the QD and ergo but didn't need the extra length. Made a thin plate that should screw right into the QD stock, might need shorter screws
Compatible with priming brace
This is a quick disconnect for the Proton Pack made by out of Outofdarts. This requires no additional hardware except for glue and a rubber band. Optionally electrical tape or a thin gasket material may be used to assist with the airseal,…
Simple holder for Magfest Swadge 2019! Clips onto the battery holder, needs a CORRECTLY ORIENTED 90 degree usb micro plug. I used this one: https://www.amazon.com/gp/product/B00EBGGXS2/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1…
These are all currently available results.
