Counting matching models…
Solder helping hands are an awesome aid in the workshop. Helping hand arms need to be flexible and precise so you can easily position objects. These 3D printed helping hands are easily configurable to have more arms or be longer with the…
Has a very stable base so can easily go higher to add more Playstation controllers or headphones. The pole is screwed together using 7cm straight section sections and 2cm stopper sections to hold a stand. Screw parts together while…
An easy way to build a Heat Set Insert Press. Full instructions on Youtube…. Supplies : 30cm(12 inches) length of square aluminium tube 25.4mm(1 inch) Four screws 4mm diameter for the base Two screws 3mm diameter 5mm long A piece of wood…
This is the next version of 3D printer ventilation I've built for my 3D printer enclosures. The video shows how the ducting, ducting connectors and gates were installed. It also shows how I researched and designed an inline fan using PC…
A small bath to wash your linear rails in degreaser or isopropyl alcohol. You should always wash new linear rails to remove any anti-rust or dried grease on the rails. Fits 150mm MGN7 rails typically fitted to Voron 0.1 3D printers. You…
Print this great little stopper for takeaway coffee cups. Perfect for preventing spills in your car cup holder or when carrying your takeaway order in a cardboard tray. Watch it in action https://youtu.be/WtvZSm9ikP8 Print upside down…
Created a lock for the cubby house door. I wanted a nice big old fashioned key and it went from there. The lock has a working mechanism so once the bolt has moved across it is locked in position until you turn the key again. Unlike the…
A simple sturdy headphone hanger that slots onto a drawer or door. Has a gentle curve to mould to your headphones. Slots onto a door/drawer thickness up to 19mm. Also includes a variation to screw to a wall or the side of your desk with 2…
Connector for adding ducted ventilation to your Bambulab P1S enclosure. Once printed, glue neodymium magnets into the 4 slots on the back. Screw in two M2 screws into the alignment holes. These don't screw into the enclosure, but just…
M2 T-Nuts are great for attaching components to Voron 0 3D printers, to 1515 aluminium extrusion or even attach the Voron 0 case using the T-Nuts. You can use these 'post build' when you can't slide any M3 nuts into the extrusion slots…
Connectors and outlet plates for 4 inch / 100mm ventilation ducting. Print two '45 degree angle' parts and glue and/or bolt together to create a complete connector. Printing in 2 parts has the advantage that no supports are need for…
A larger adjustment wheel for the Voron 0.1 3D printer. Allows for finer and more precise adjustment when bed levelling. This wheel is 25 mm diameter compared with the standard 17 mm wheel. Add an M3 heat insert after printing to fit M3…
Case to hold Raspberry Pi 4 and a 4 relay board. I used it to hold my printers Raspberry Pi and the relay board, to power an enclosure LED light switched on/off by Octolight ( https://plugins.octoprint.org/plugins/octolight ) Full…
I used these tools to replace the 6 pairs of bearings in my mountain bike suspension. You can buy the specialised tools to do this but I wanted to see if it was possible using my own 3D printed tools. The rear suspension triangle started…
Plastic curtain hook gliders get brittle with age so its very handy if you can print replacements when you need them. Recommended print settings: Print on its side with tiny tab facing downwards. Print without supports, it has a tiny…
Pencil rack in 3 sizes to hold pens, pencils, paint brushes or anything you fancy. Designed in 3 sizes of 3x3 holding 9 pencils. 7x7 holding 49 pencils and 10x10 holding 100 pencils ! Printed in 2 parts, no supports required. I printed in…
Designed this window latch for the kids cubby house. You can hold the window open at different positions using the holes along the arm. Used two M5 25mm hex head bolts for the pivots. Secured to the window and frame with: one 39mm M4…
Purging the previous filament from the extruder it can be bit slow with the wheel, so here's an old style hand crank that speeds it up. You need an M3 x 35mm bolt for the handle axle. Tighten the bolt just enough so the handle doesn't…
Screw top spare battery carrier for travels and adventures. Carries 3 AA batteries. Its good to use a case so batteries don't get lost or accidentally short out. Lid has grippy ridges so easy to open. My spare batteries are for torches…
Remix of the Sherpa Blockhead Dragon print head. Changes: Use Orbiter V2 extruder Thicker blockhead for stronger hotend attachment Four screws with washers to attach Dragon hotend. Washers spread load. Heat set inserts to attach hotend…
This can be used as a storage drawer or rubbish bin/trash can. I created it as I needed a rubbish bin within easy reach. The bracket is screwed, or could be stuck, to a vertical surface. The bin then slots in and is super easy to swing in…
If you have more than a few spools of filament it can be really useful to print samples for each spool. When trying to decide what colours to use for a design its much easier to work with the sample squares. You can arrange them along…
Created this drawer to hold the essentials that I'm constantly using but don't want them to clutter up the workbench. Have several of these holding drill bits, router bits and 3D printer essentials. Installs with 2 small screws on each…
If you're printing ABS it helps to know the temperature inside your enclosure so you're sure its 'heat soaked' enough and your print isn't going to peel off the bed. The front skirt of the Voron 0.1 has been modified to hold a digital…
Another approach to your standard shelf bracket. Instead of having the bracket extend at 90 degrees from the wall, angle it 20 degrees to the side. Makes it so much easier to screw the wall screws in and still gives great support. The…
A sturdy mount to locate your Sovol 6 Plus power supply outside your enclosure. Power supply can easily be accessed or removed after mounting by sliding it out the top.
I needed a stand for my screwdriver, and as it looked like a rocket it just needed some boosters! Inspired by the gCreate rocketship model https://www.thingiverse.com/thing:427789 The holder has an internal diameter of 18.5mm so you could…
These are all currently available results.
