Counting matching models…
This is a remix of the main picker part where an unwanted gap is removed / corrected and also some useful rounding corners added. One of these eliminates the need of supports there. I was printing this interesting design and discovered a…
Deutsch: UPDATE 3: Ein (experimenteller) Halter für meinen Flaschen-Halter ( http://www.thingiverse.com/thing:3454127 ) hinzugefügt. Basiert auf die "big"-Version mit 26 x 5 mm Öffnung. UPDATE 2: Eine noch größere Version des Halters…
A small remix of this simple and useful part with some extra cuts to help inserting and removing (especially removing) the hygrometer much more easy (turn and pull out). Thanks for the initial design "SubSite"! Print Settings Printer:…
DEUTSCH Ein funktionales 15cm Rohr für das Quadro-System. Wenn der Drucker gut kalibriert ist, passt das schön und gut fest in die Kupplungen. ACHTUNG! WICHTIG! Das selbst gedruckte Teil hat keinen Anspruch auf die gleiche Festigkeit wie…
An attachment for a cutter to clean the edges of printed parts. The part helps to remove remains of brim for example quite clean and straight, which can rarely succeed so well with the hand without guidance. The blades for which it is…
A simple remix for this squash ball feet to be used on the 20mm side of 2020 or 2040 aluminum extrusion / profiles. The holes are for M5, but they can easily adjusted by changing the measurements in the attached FreeCad file. Print…
A crosshair laser guide holder for two 12mm line lasers for a drill press from Parkside PBTM 500 A1 with 46mm pipe diameter but it is easy customizable by the spreadsheet in the attached FreeCAD file for other diameters and lengths. The…
An Y-Axis GT2 belt holder suitable for the heat bed frame holder from Bohrers Shop ( https://shop.bohrers.de/heat-bed-holder-anet-a8-und-a6-kommt-in-kuerze.html ) but it should also fit on the stock Anet H-frame (the holes do) and…
An adapter / holder to mount an SK8 linear rail shaft at the right height on an Anet AM8 / PK8 / PK6 2040 aluminum profile. The linear rail is about 3mm above the upper side of the 2040 extrusion or about 7mm for the center of the rail.…
This is also a good clearance / calibration test for your printer. It works only, if your printer can print accurately small parts. The needed clearance is 0.1mm! Please use other strain relief designs if you don't have a well calibrated…
Deutsch / German: Ein Adapter um den Angel-Vac Nasensauger für Standard-Staubsauger im Handstaubsauger von Aldi-Süd benutzen zu können. Das Akku-Handstaubsauger-Modell ist "EASY HOME VC 2118 0518". Die Abmessungen der Außenseite der…
A simple remix of the original part ( https://www.thingiverse.com/thing:2908391 ) with the only difference having the cutter tube diameter from the original 4.6mm down to 4.15mm and 4.20mm. For me, the PTFE tube was little bit to wobbly…
A form to create four silicone dampers for the stock Sidewinder heatbed. The size of the dampers is 20mm height and 23mm diameter. M5 screws are needed as "placeholders" and to connect the two parts together, but... ...Unfortunately,…
A mount adapter for the All-Metal Aero BMG extruder (tested with the version from Mellow). It places the nozzle near the same spot as it is on the stock extruder. It uses the common "Aluminium alloy BMG Bracket Support Nema17 Motor Mount…
After deciding to use this belt tensioner https://www.thingiverse.com/thing:2253143 , I was searching also for a way to hold the x-axis GT2 16T pulley because these I have do not fit into the normal Anet A8 pulley holder. Nothing found…
Deutsch: Hier ist ein Satz von Kupplungen für das Quadro-Baukastensystem um ein reales Modell in Maßstab 1:10 zu erstellen. Auch wenn ich mit der (recht eigenwilligen) Software gut umgehen kann, dachte ich mir, dass ein echtes Modell zum…
This is a remix of the camera holder clamp only, to fit better in places up to 30mm wide (the original is only about 26mm wide). For the other parts, please use one of the original or remixed sources:…
A simple and small tool to help you centering the heatbed screws into the four holes of the bed holder to avoid contact of the screws with the holder. This can prevent bending of the glass bed through expanding (while heating) if the…
This is a holder for the BLTouch / 3DTouch sensor meant to be mounted behind the radial cooling fan. Initially I designed this for my Anet A8 in combination with the "Mistral 2.1a" fan duct from user Neo_N (…
A very simple bottle holder, maybe not so pretty looking as others here but with some goals to achieve: It should print without supports and does not need many retractions (even if my printer would not have any problem with retractions).…
This is a (regulator) case to house the parts that are necessary to control a fan for the Sunlu Filydryer S1 ( https://www.thingiverse.com/thing:4628798 ). A DC-DC converter and a motor speed control board are used. Almost every fan can…
A simple round clamp with 22mm inner diameter. Fastened by three M5 screws / nuts. On the attached photos, you can see what is my intended use of this clamp... :-) Print Settings Printer: Anet A8 Rafts: No Supports: No Resolution: 0.24…
A heatbed cable support for the Anycubic Ultrabase heatbed in combination (out of the box) with the Bohrers heatbed holder ( https://shop.bohrers.de/heat-bed-holder-anet-a8-und-a6-kommt-in-kuerze.html?language=de ) for the Anet A8 & A6.…
I spent half a day printing this display case (from witch I made this "remix") and I asked me "why is it so big?". I couldn't find any answer except "for beauty reasons"... Anyway, I thought, what can I make meaningful with the available,…
This is a remix of a very simple Micro SD card holder. First I planed to merge a holder with my filament guide ( https://www.thingiverse.com/thing:1915337 ) but then I realized that printing of such a combined part would be not very easy.…
This is an adapter for cutting the connection between TFT display and mainboard allowing to flash the firmware without issues and without having to unplug the cable each time on the Artillery Sidewinder X1. The DIP switch can be reached…
This is not real a remix of the original design but rather an "add-on". This part has to be glued onto the reset hole of the front cover and should protect accidentally hitting the reset button. The height of this part is 3.5mm, maybe it…
These are all currently available results.
