P
Printablesstefi01
stronger mc4 tool
wanted it slightly thicker Category: DIY
- Downloads
- 1,854
- Likes
- 68
- Rating
- 4.58
All models
Counting matching models…
P
Printablesstefi01
MC4 Splitter Tool
just a simple MC4 disconect tool Category: Tools
- Downloads
- 659
- Likes
- 28
- Rating
- 5
P
Printablesstefi01
recycle failed 3d Print Shredder
Will update when finished, box box and hoper are now built, next is to think of a way to add a gear motor with chain drive. IF ANYONE NEEDS EXTRA PHOTOS THEN LET ME KNOW WHAT OF AND I WILL POST THEM HERE. We had printed and built the…
- Downloads
- 378
- Likes
- 112
- Rating
- 0
P
Printablesstefi01
hummingbird feeder for soda bottles
the original was a great design and works well but didnt fit the standard cola and other soda bottles, this one does i made the original bottle holder ring abit thicker and to fit 500ml bottles but never for a 1 litre bottle, although…
- Downloads
- 179
- Likes
- 32
- Rating
- 0
P
Printablesstefi01
T4 prop guard for 1045 and large props upto 10.5 inch
T4 prop guard for 1045 and large props upto 10.5 inch Category: R/C Vehicles
- Downloads
- 117
- Likes
- 4
- Rating
- 0
P
Printablesstefi01
evil minion
it took so many atemps to get this to print and not fail, i want more but not going to go through so much wastage filiment again so i broke this thing down to parts and thought id share it, this is an experiment so hope it all works…
- Downloads
- 103
- Likes
- 23
- Rating
- 0
P
Printablesstefi01
Adafruit BTTF Time Circuit Case
Spent ages trying to work this design out, 2 days latter it was done, bits fit nicely although tight squeeze but it fits, extra height incase an arduino is used, i brought all the bits from Adafruit, but can i work out the building of of…
- Downloads
- 67
- Likes
- 26
- Rating
- 0
P
Printablesstefi01
arduino stand plus 3 x large breadboard inserts
takes 3 of the breadboards from the original design one end is slightly to narrow so s shown in pic I took the power rail off one side and used that going long ways in between the arduino and the 3 boards this will not print on a prusa as…
- Downloads
- 62
- Likes
- 10
- Rating
- 0
P
Printablesstefi01
flsun kossel sd card contents and pre configured marlin 1.19 and 2.0 for skr v1.3
the complete sd card contents with nothing removed. the firmware that comes on the board with the kossel is junk so i included a preconfigured version of marlin 1.19 (for stock board) and 2.0 (for skr v1.3) for the flsun kossel with large…
- Downloads
- 54
- Likes
- 6
- Rating
- 0
P
Printablesstefi01
Cockatiel egg candler attachment
egg candler attachment for small eggs such as cockatiel or quail Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 0.2 Infill: 20% Filament: creality pla Grey Notes: Any material should work…
- Downloads
- 53
- Likes
- 2
- Rating
- 0
P
Printablesstefi01
Canon Lense Cap with Logo
made it flt on top with logo Category: Camera
- Downloads
- 52
- Likes
- 11
- Rating
- 0
P
Printablesstefi01
Treble and Base Clef Heart thing
a friend wanted the original but with letters added so uploaded to here Category: Fashion
- Downloads
- 45
- Likes
- 3
- Rating
- 0
P
Printablesstefi01
15mm Measuring Spoons
Customized version of http://www.thingiverse.com/thing:51874 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=51874 Instructions Using the following options: Thickness = 4 Font = write/orbitron.dxf…
- Downloads
- 43
- Likes
- 3
- Rating
- 0
P
Printablesstefi01
Standoff 30mm x 6mm with 3mm pole diameter & 7mm pole height
Customized version of http://www.thingiverse.com/thing:351092 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=351092 Instructions Using the following options: Columns = 3 Y_Offset = 30 Added_Base = 3…
- Downloads
- 43
- Likes
- 5
- Rating
- 0
P
Printablesstefi01
air raid siren housing
just a housing for the thing this is a remix of and room for a motor on th back, have not designed th centre bit .yet but will someday, use two of the insides from the orignal, one mirrored and one not mirrored, place back to back and add…
- Downloads
- 40
- Likes
- 0
- Rating
- 0
P
Printablesstefi01
My Customized WALLY - Wall Plate Customizer
Customized version of http://www.thingiverse.com/thing:47956 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=47956 Instructions Using the following options: 3rd_plate_bottom_hole = none 1st_plate = toggle…
- Downloads
- 39
- Likes
- 5
- Rating
- 0
P
Printablesstefi01
Standoff 30mm x 6mm with 3mm thread, 7mm depth
Customized version of http://www.thingiverse.com/thing:351092 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=351092 Instructions Using the following options: Top_Style = 2 Y_Offset = 30 Base_Thickness =…
- Downloads
- 39
- Likes
- 2
- Rating
- 0
P
Printablesstefi01
falcon 9 landing legs and grid fins
changed a few bits to make them easier to print but had to change a few other parts so they still fit the original falcon 9, the landing leg axal holes have also been made smaller so they dont break as easy, axles are resized to match…
- Downloads
- 38
- Likes
- 3
- Rating
- 0
P
Printablesstefi01
Redesigned prop guard
found the original on instructables but was not strong enougth so i strengthened it,,,,alot use brim and touching buildplate for the prop guard file as its nearly but not quite flat but still worth printing. for the prop guard (1) file,…
- Downloads
- 36
- Likes
- 1
- Rating
- 0
P
Printablesstefi01
ANDREW Lego Block Necklace/Keychain
Customized version of https://www.thingiverse.com/thing:340321 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=340321 Instructions Using the following options: Name = ANDREW BlockLength = 5 BlockWidth = 2…
- Downloads
- 35
- Likes
- 0
- Rating
- 0
P
Printablesstefi01
cross fire standoffs 30mm high, 3mm inside diametre, 8mm outside dametre,fits 50mm x 4mm bolt
Customized version of http://www.thingiverse.com/thing:109744 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=109744 Instructions Using the following options: fragments_Outside = 12 build_plate_selector =…
- Downloads
- 32
- Likes
- 0
- Rating
- 0
P
Printablesstefi01
5mm Measuring Spoons
Customized version of http://www.thingiverse.com/thing:51874 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=51874 Instructions Using the following options: Conversion =…
- Downloads
- 29
- Likes
- 1
- Rating
- 0
P
Printablesstefi01
10mm Measuring Spoons
Customized version of http://www.thingiverse.com/thing:51874 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=51874 Instructions Using the following options: Conversion =…
- Downloads
- 25
- Likes
- 3
- Rating
- 0
P
Printablesstefi01
Dremel 400 series 2 halves for Ender 3 and other shorter printers
I split the in half and added holes and pegs so it can be glued together and the pegs keep it glued together, fits Dremel 4000 series so 4000 4300 etc. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: Yes…
- Downloads
- 24
- Likes
- 2
- Rating
- 0
P
Printablesstefi01
Arduino filastruder filiment guide with servo mount
changed it so that a mini servo such as tower pro (SG90) can fit, small bit of filling needs doing as about 0.5 mm to wide, also i used an Arduino sketch with this which operates this at slow speed. Remember to download the…
- Downloads
- 23
- Likes
- 2
- Rating
- 0
P
Printablesstefi01
Fan Duct with suport
Had problems printing this with cura and slic3r so added permanent support and these printed fine in cura the file - e3d hypercube fanduct has a thicker layer inside the top bridge where it slots into the main mount, the rest is…
- Downloads
- 22
- Likes
- 3
- Rating
- 0
P
Printablesstefi01
Nova Spotmicro leg Calibration tool
Nova Spotmicro leg Calibration tool, which is for setting the 45 degree angle of both leg parts, should also work on the original Spotmicro also Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution:…
- Downloads
- 21
- Likes
- 0
- Rating
- 0
P
Printablesstefi01
Raspberry Pi Night Vision Camera For Motioneye(os)
I was trying to find a decent design for a Raspberry pi camera that I could use with Motioneyeos and found BarbedWire's design which is awsome and just what I needed. I changed the PIR motion sensor as motioneyeos uses the camera to…
- Downloads
- 21
- Likes
- 6
- Rating
- 0
P
Printablesstefi01
imposible calibration cube'ish
was board so designed this, remixed from a few others but could not remember who so feel free to link this to yours i think this would be used to see how fast a printer can go before distorted prints occur Category: 3D Printer Accessories
- Downloads
- 21
- Likes
- 1
- Rating
- 0
P
Printablesstefi01
stronger microspot stand top
not much of a remix but wanted the stand to be a bit more sturdy at the top. as for the other part of the files, get those from the original designer i remixed this from. https://www.thingiverse.com/thing:4441076 presented a thumb screw…
- Downloads
- 20
- Likes
- 0
- Rating
- 0
P
Printablesstefi01
Prusa i3, Aworldnet A600 Z axis plastic printer parts
Replacement Prusa i3, Aworldnet A600 Z axis plastic printer parts for 8mm rod. The two parts in one file are original scans but the two seperate pieces have been strengthened below one to the cross bar parts as seemed to flimsey.…
- Downloads
- 20
- Likes
- 1
- Rating
- 0
P
Printablesstefi01
Amazon Echo Dot Case with Logo
same as original design but with the amazon logo added Category: Gadgets
- Downloads
- 19
- Likes
- 8
- Rating
- 0
P
Printablesstefi01
e3d Volcano fan duct for hypercube
I extended the fan duct so can reach the nozzle of the e3d volcano but the volcano with its 0.8mm nozzle, it was too wide to print it and just missed half the print so i thickened it all up so it can be printed with it. Category: 3D…
- Downloads
- 18
- Likes
- 0
- Rating
- 0
P
Printablesstefi01
Direct drive extruder for Hypercube
remixed to fit the hypercube mount, for the rest of the files use the original's from the 3D 75 Geared Extruder Print Settings Printer: Hypercube Rafts: Doesn't Matter Supports: Yes Category: 3D Printer Extruders
- Downloads
- 18
- Likes
- 1
- Rating
- 0
P
Printablesstefi01
300mm x 300mm aluminium 3d printer
i posted it here http://www.instructables.com/id/Aluminum-Extrution-3d-printer-with-12x12-inch-heat/ all stl files are what i found around the net and many were used for the printer, i however did not design them,just wanted to share what…
- Downloads
- 18
- Likes
- 4
- Rating
- 0
P
Printablesstefi01
Laser Engraver X-axis motor mount for 80/20 series 10 extrution
remixed it to fit 80/20 series 10 extruion only, does not fit the original design, also changed it so that the wheels can have a sort of axle rather than fixed on one side only. Category: Machine Tools
- Downloads
- 17
- Likes
- 0
- Rating
- 0
P
Printablesstefi01
Raspberry pi/Odroid C2 Mounting case
A case that can mount to other thinngs Category: Models
- Downloads
- 17
- Likes
- 2
- Rating
- 0
P
Printablesstefi01
Camera mount for nova sm2/sm3 Nova spotmicro
did not like the bulky cover so designed a camera mount insert, even if no camera is used, it is still flat and should'nt interfere with the sonar, the camera it is designed for is a standard Raspberry pi camera. Print Settings Printer…
- Downloads
- 15
- Likes
- 2
- Rating
- 0
P
Printablesstefi01
3 large breadbord's in 1
larger than 200mm bed needed but takes the cheap large snap together type breadboards as shown in the original this is remixed from Category: Electronics
- Downloads
- 15
- Likes
- 0
- Rating
- 0
P
Printablesstefi01
Pantom/nova style upper body
Needed extra room as i wanted to use an APM and QBrain 4 in , plus cram every thing else in so made a few alterations, the original was full scale but Tinkercad would not let me download the file as was over 25mb so i scaled it down to…
- Downloads
- 15
- Likes
- 1
- Rating
- 0
P
Printablesstefi01
My Customized Whistle Magic - create your own whistle - Your Whistle your Music
Customized version of http://www.thingiverse.com/thing:46825 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=46825 Instructions Using the following options: make_holder = 1 rad = 30 laenge = 35 textsize =…
- Downloads
- 15
- Likes
- 1
- Rating
- 0
P
Printablesstefi01
ARDUINO LIGHTNING TRIGGER for EOS cameras
i wanted a way to capture lightning photos without keeping the shutter open for lengths of time and i came across a project that seems to fit what i was looking for which works on nikon and with one small change will work on canon too but…
- Downloads
- 13
- Likes
- 2
- Rating
- 0
P
Printablesstefi01
simple box, tray (from one nut to another)
simple box or post it not tray Category: Office
- Downloads
- 13
- Likes
- 1
- Rating
- 0
P
Printablesstefi01
filastruder extra 60mm Fan mount with and with out filament guide.
this is to enable dual 60mm fans on a filastruder, one each side. Category: 3D Printer Extruders
- Downloads
- 12
- Likes
- 2
- Rating
- 0
P
Printablesstefi01
Nova SpotMicro Remote rear case
gives 8mm extra room around the battery compartment and a mount for a male jst, has a rear battery cover for easy access. Category: Robotics
- Downloads
- 11
- Likes
- 1
- Rating
- 0
P
Printablesstefi01
3D heated enclosure
I tried ABS printing which was part failure as when it cooled some layers split and some warp-age, after research i learnt that i needed a heated enclosure so the filament cooled gradually and also needed to prevent draft, so all parts…
- Downloads
- 11
- Likes
- 4
- Rating
- 0
P
Printablesstefi01
Spot Micro Nova stronger extended top cover
slightly stronger top cover for the extended version and the other file is the same but with a flat top Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: Yes Resolution: 200 Infill: 100 Filament: Overture PLA…
- Downloads
- 10
- Likes
- 0
- Rating
- 0
P
Printablesstefi01
reittec polisher - 170mm drum support
needed a way to stop the drum bouncing off, designed for a paint can. 1x skateboard bearing ... 8mm inside diameter 1x 1 1/2 inch spring and some 3mm and 8mm bolts also i added spacers glued into the support wheel holes so i could use…
- Downloads
- 10
- Likes
- 2
- Rating
- 0
P
Printablesstefi01
AZSMZ LCD Bracket For Kossel Mini
bracket so that this design of LCD can mount on to Kossel Mini using both extrusion's, print one as is then mirror and print again for the other side Category: 3D Printers
- Downloads
- 10
- Likes
- 0
- Rating
- 0
P
Printablesstefi01
Mount for Rambo 1,2 with 2 x 40mm fans for 2020 extrusion
remixed it to fit 2020 extrusion for use on core xy hypercube added are 2 x 40mm fans behind the board Category: 3D Printers
- Downloads
- 10
- Likes
- 0
- Rating
- 0
P
Printablesstefi01
BTTF Flux Capacitor Valve
modeled from http://www.instructables.com/id/Flux-Capacitor-Back-To-The-Future/ just scale it as needed. Category: Hobby
- Downloads
- 10
- Likes
- 1
- Rating
- 0
P
Printablesstefi01
EleksMaker 3.5 watt Laser mount for Hypercube
slightly different size from the 2.5w. not all files are needed, only print whats needed Category: 3D Printer Parts
- Downloads
- 9
- Likes
- 0
- Rating
- 0
P
Printablesstefi01
oculus rift adjuster
no way of putting this clean minded but i needed a bigger knob. and dont even think about it. Category: Video Games
- Downloads
- 9
- Likes
- 0
- Rating
- 0
P
Printablesstefi01
HyperCube sharpie holder
I thought I'd have a go at a sharpie holder, it does work although the springs need be weaker, if anyone wants to improve on this then let me have a copy of the stl file, it bolts right on to the extruder bowden mount, mine is used on the…
- Downloads
- 8
- Likes
- 5
- Rating
- 0
P
Printablesstefi01
12864 combined with YX-Ammeter-Voltmeter
volt/amp metre http://www.banggood.com/0_28-Inch-Dual-Display-Red-Blue-LED-Panel-4_5-30V-Digital-Voltmeter-Ammeter-1-100A-p-1093413.html?rmmds=myorder metre used for the heat bed but wanted to combine a few things, trying to stop some…
- Downloads
- 8
- Likes
- 0
- Rating
- 0
P
Printablesstefi01
Crossfire T2 Arm
wanted stronger, same as the orignial file, just added bits Category: R/C Vehicles
- Downloads
- 8
- Likes
- 1
- Rating
- 0
P
Printablesstefi01
Atlas 3D Scanner lasser
Resized the hole from the original as i brought an Atlas Scanner kit but wanted to use the PIClop body as it looks better, this holds the laser from it. Category: 3D Printer Accessories
- Downloads
- 8
- Likes
- 0
- Rating
- 0
P
Printablesstefi01
Velleman MK138 Thermostat box
Had a go with Tinkercad trying to make my first thing and this is what i came up with, needed some scaling in Cura but managed to make it work :) if it is not quite right in any way then the files are saved at tinkercad's web site. I plan…
- Downloads
- 8
- Likes
- 0
- Rating
- 0
P
Printablesstefi01
dual mount for Raspberry Pi Zero Wall Mount case for NoIR camera
I use motioneyeos with this camera as a live stream bird nest cam and will mount it in either orientaion so need a mount on both sides Category: Camera
- Downloads
- 7
- Likes
- 0
- Rating
- 0
P
Printablesstefi01
angeled cone for palletizer feeder
i found that filament always slipped out of the intake hole hole so i made an angled cone piece to stop that from happening. Category: 3D Printer Accessories
- Downloads
- 6
- Likes
- 0
- Rating
- 0
P
Printablesstefi01
atempted rework for y axis belt holder with tensioner
re did the idler file to make it stronger and to move the hole so that the bearing misses my aluminium extrusion frame and to have a thicker hinge area, the two files named idler are the originals and the mount with one of the two other…
- Downloads
- 6
- Likes
- 0
- Rating
- 0
P
Printablesstefi01
SM2StandSquaredBlock extended
the orginal is not quite the right size to fit Spot so I extended it so it does fit. both files are the same,just diferent format. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 200 Infill: 20…
- Downloads
- 5
- Likes
- 0
- Rating
- 0
These are all currently available results.