Counting matching models…
I vent my laser fumes outdoors via a 4 inch plastic ducting. I would often trip over it or somehow manage to put pinholes in it from it laying on the ground thus came up with an easy solution to hang it instead of it laying on the ground.…
I can never cut my film straight but I'm not crazy enough to pay $50 for a cheap film cutter thus this invention was born. It keeps your film straight and allows a razor blade to make a clean cut. This holder is not channeled (to prevent…
I hate sewing. I really hate sewing but my grandmother used to enjoy sewing up my work clothing that always ripped weekly from my abrasive warehouse job. Since my grandmother has passed, I decided to fix my own clothing since clothing…
Hate flare ruining your nice film photos or want to make that collectors Lubitel look like it actually works? Look no further than this lens hood. Helps cut down on flare and doesn't show up in photos when printed. Depending on your…
After my Pilots vents broke and paying the money to replace them, they managed to break again. I modeled them to be more robust than the original ones and they have held up really well. Vents are designed for right side but can be flipped…
Got a broken front vent on your Honda Pilot? This may be able to help. I received parts of a vent from a member on Piloteers and sketched out two of the pieces as I believe the rest are the same. There is one that is longer by 1-1.25 mm…
A two piece design allowing you to use a Kiev TTL viewfinder on a Lubitel 166. This is so much nicer using this than the horrible waist level finder and even has a built in meter! This took many many reiderations with it being remodeled…
I bought another enlarger lens to do a sharpness test between lenses but wasn't about to drop $50 for a used lens board. With some CAD magic and a few drafts, I was able to come up with this. This lens board is for M39 lenses and includes…
My 3 inch Morimoto fog light bracket broke and rather than pay good money for a new one, I sketched this one up instead and printed in Polycarbonate as an awesome replacement. This also fit a chinese universal 3 inch fog light that I had…
Do you also hate sharpening your tungsten haphazardly with the tool rest of you bench grinder? I designed this tool rest to fit 3/32" tungsten at your perfectly set angles allowing you to grind all your tungsten to the perfect angles…
I have a laser that I use both for engraving wood, metal, and occasionally PVC (yes, I know all about the chlorine). The fumes from certain materials actually started making the bearings in an inline fan start squealing and accumulating…
I wanted a tig torch holder for my awesome Grizzly welding table. I used to use a magnet torch holder but it used to fall often and break cups so I made this. It's not pretty, but holds my torch perfectly. I added three magnet holes in…
A 90 degree hotshoe adapter used to mount a Gopro horizontally on a medium format camera. Can be used for other things as well. Might have to tweak layer height to get it to print right. Make sure to print it laying down on its side.…
I didn't like the nozzle cover that came wih my EZ Pour so I modeled and printed this knurled cap. Tolerances are fairly tight to keep the vapors at bay. Would recommend printing in something gasoline resistant like Nylon or PA6-GF or…
I hated how my WD Mycloud EX2 Ultra vibrated on the shelf since mine was missing the rubber feet from the factory. I made this adapter that fits into the slots at the bottom of the device allowing you to model or use premade models of…
I wish the Industar collapsing lenses could lock in the collapsed state permitting me to throw my Zorki 4 with the lens in a coat or sweatshirt pocket but always worry about the lens breaking since it moves around if not locked. Fear no…
I hated the push on breather that my drain pan container comes with from the factory since it never pushed on and always leaked no matter what. I designed this to screw in and mostly stay in place, allowing you to screw off the drain and…
Being constantly annoyed with having to hold both Leningrad 8 light meter and my strapless Lubitel 166 Olympic edition during changing light conditions, I had an idea. This is a holder that holds your Leningrad 8 light meter fairly…
I use the Ryobi FVL52 USB flip out light for some fancy B-roll and occasional vlogging and the light while being super bright, is also very harsh. I modeled this diffuser that gets shoved into the light and diffuses but has a small handle…
I love the T-22 lens on the Lubitel 166's but loath the lens flare that comes with it. I've made a lens hood for the Lubitel's in the past but that was only for the taking lens and it doesn't help focusing when the viewfinder is full of…
I got tired of my welding helmet falling off my welding table / cart so I modeled this up. It uses the existing 5/8" fixture holes to mount and holds a variety of helmets. Confirmed to fit Miller, Lincoln Electric, and Yeswelder helmet…
I wanted a simple hydrometer holder that would fit inside my spools and be able to use vacuum bags without ripping the bag. I tried a few others and didn't find exactly what I wanted and this was born. It fits spools with an inside…
The winding knob for my Zeiss Ikon Nettar 517/16 fell off while shooting and I sketched this up with no reference to the old one. This one works fantastic and much better than the factory one (except this one is plastic and the factory…
For some odd reason, I always have calendars rip and fall off the wall in the middle of the night or during an important Zoom meeting. I thought “there should be a tool that fixes this” and searched for hours (like 3 minutes) and then…
I lost my fuel door lever cap while doing some work on my Pilot. Rather than pay $15 for another one, I tried my best to make one that worked yet looked close to the original one from my memory. Should fit 2003-2008 Honda Pilots but may…
A short yet wide tool for the Ryobi PCL702 hand vaccum. This one fits the vaccum perfectly and does not leak like some other tools for this vaccum. I printed in transpartnet PLA and it has held up great for months of use. If printing in…
My FED 3 has scratched two of my nice glasses just from regular use so I fabbed together this piece. This offers protection from the sharp metal eye piece and prevents your glasses from getting scratched. You might have to scale down a…
I lost the chute lid for the black and decker food processor and needed another shoot lid as any temporary replacements like a notecard and credit card weren't working all that well. It took a few revisions but here it is! I recommend…
I wanted a handy way to store my tungsten when it accidentally gets dipped into the welding pool and thought a tray that mounts to my welding table would perfect. I've been running this design for a few weeks now and it works awesome!…
Two of the legs broke off on my Beseler enlarger timer leaving it sitting lopsided on my table. I modeled this timer's legs close to the original but gave it a 1 mm boost. You might need to scale the model 101% if the screw hole is too…
I needed to vent my Bambu P1S into my air purifier so that I could print the most smelly ABS known to man (INLAND ABS..). This design uses the mesh vent of the purifier for support as well as 8 6mm magnets for alignment and stabilization.…
My Lincoln Electric Miniflex Fume extractor didn't come with a nozzle for it and it's stupid expensive. Rather than fork over the cash, I decided to model this thing up. It works well but definitely print it out of something FR (flame…
I wanted a super quick way to swap 4 inch hoses between my laser exhaust and a mini welding extractor exhaust. The magnet ones were cool but way overkill for my needs (plus I never have any magnets on hand..) Thus this design was born and…
I hated having to keep coins in my pockets or carry a metal folding pliers to mount my quick release plate to my camera. This tool fixes that problem and doesn't make noises in my pockets nor scuff up other things like my phone or keys if…
I had a container of TIG rods fall off my welding table while I was welding and managed to weld my tungsten to my stainless weld project out of shock- we can't have that.. So this idea was born; it's a two piece part with both part…
My Hamilton Beach Coffee grinder is either worn out or has issues as it vibrates annoyingly on the counter each time I use it- it's annoying but not as annoying as buying ground coffee so I needed to fix it. I designed this TPU base where…
I kept loosing my Ryobi 18v Die Grinder Collet wrench and had to search out for the adjustable wrench instead until I got tired of that and this replacement was made. The fit is extremely tight in PLA and PETG. I had to scale 101% when…
I wanted a glow in the dark cover for my TIG welding rods so that I could easily grab the right rod when my auto shutoff light shuts off between welds.. This fits over top of the blue demon TIG welding rod containers and is a snug fit…
A replacement grip for the Vanguard Tripod quick release knob that fell off into the ocean when tightening my camera into the tripod. These parts, of course, are not sold by the manufacture. Print in TPU.
These are all currently available results.
