Counting matching models…
Box set for upcycling of used Devil Design Filament Spools. It uses the existing holes in the spool. No drilling needed. V2 with 3 screws less. Fits also to Spectrum filament spool
Needed a new cover for my floor drain in the laundryroom. It fits my drain with 102mm x 102mm x 5mm. Print Settings Printer: (My) Anet A8 ;) Rafts: No Supports: No Resolution: 0.2 Infill: 20 Category: DIY
Needed some simple, fast to print doorstopper. Roomba tends to trap itself in rooms.... :) Very simple, but worth a share, one part is "footfriendly". Print Settings Printer: (My) Anet A8 ;) Rafts: No Supports: No Resolution: 0.2 Infill:…
Basically the same as the original, but with a long mould for not pushing onto the contacts, when cap ist on.... and maybe a bit thicker, to sink a TomTom Logo 0.5mm deep into the bottom. ;) TomTom Logo can be taken from Wikipedias TomTom…
Caster wheel for IRobot Roomba 780. Needs a bit of "post processing" with a 9mm drill, if printed without support. Made to fit 4x9x4 bearing. Print Settings Printer: (My) Anet A8 ;) Rafts: No Supports: Doesn't Matter Resolution: 0.15…
Logitech K260 foldaway feet. As you see, it is possible to print the little nose of the hinge. Print Settings Printer Brand: Anet Printer: A8 Rafts: Doesn't Matter Supports: No Resolution: 0.08 Infill: 15% Filament: NuNus PETG black…
Cupholderinsert for Chinese Cupholder from Amazon . Coins, Vapegear, Liquid, Ballpen.... or a 20s pack of Luckies... ;) Holder: https://smile.amazon.de/gp/product/B07YHDYVFH/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 Holder for…
The display of my Joying headunit, wich by the way, does a great job, needed a certain angel because in my bmw the radio faced slightly downwards.... You will need additional 8 screws M2.5*10mm Print Settings Printer: Artillery Sidewinder…
Thingi to make propper 125mm burgerpatties. ;) Might be scaled down, the ring is 30mm. Print Settings Printer: (My) Anet A8 ;) Rafts: No Supports: No Resolution: 0.2 Infill: 25 Notes: Made from ABS for beeing able to be put in the…
Holder for S10/Xiaomi 11T in Samsung original case for the cassette deck of a BMW E39, E46, E38.... S10 v7 has a bit more thickness in the tape deck. To prevent case from scratching, on left and right is some felt-cushion glued in...…
Thingi to support wineglasses in the dishwasher. Make it from ABS or so, to stand the 70°C in the dishwasher. Print Settings Printer: (My) Anet A8 ;) Rafts: No Supports: No Resolution: 0.2 Infill: 15 Post-Printing Category: Household
Glasfluegel 401 Kestrel badges taken from my glider. Print Settings Printer Brand: Anet Printer: A8 Rafts: No Supports: No Resolution: 0.2mm Infill: 25% Filament: NuNus PETG Translucent Category: DIY
My first Sqounk box mod for single 18650, unregulated. You will need an 18650 battery cradle (Keystone > Picture), 3 x 2mm Neodymium magnets, a copper strip and a Fat Daddy Vapes 510 connector. Still work in progress, had to scale up to…
Citroen C3 Picasso Magnetklappe Gepäckraumboden / Rücksitzlehne. Für die beiden Klappen, welche magnetisch an der Rücksitzlehne Richtung Kofferaum angeklappt sind. Diese werden heruntergeklappt, wenn man die Rücksitze zur Vergrößerung des…
Edit 2: Now with "Safe Z Homing", but due to the fact my PKM8 is highly modified, i recommend you to edit configuration.h's define X_MIN_POS define Y_MIN_POS and define MANUAL_X_HOME_POS define MANUAL_Y_HOME_POS Edit: That's the thing…
This ist a remix of the really good https://www.thingiverse.com/thing:2503311 fan duct, to fit my personal Anet A8. This thing is really open draw and deserves the attribute high flow duct for the cooling fan. :) Had to modify the plate…
Shapemodified knob, primarily for LS4a canopyrod. I bet, any other LS glider that came from Egelsbach, will work. The original knob is included. Print Settings Printer Brand: Anet Printer: A8 Rafts: Doesn't Matter Supports: No Resolution:…
I needed a new air guide plate for the canopy of Schleichers legendary ASK13 glider. Here it is. Had to drill the holes to mount it in the workshop. Print Settings Printer: (My) Anet A8 ;) Rafts: No Supports: Yes Resolution: 0.15 Infill:…
Thing to engage the cat for getting some treats.... I had to scale the cap up to 101% to fit the tube in. The parts fit together an glueing ist not necessary. Nevertheless i know my cat an glued them together. Just wanted to avoid the cat…
Knob for ASK13 canopy. Required 4 times plus one M6 (selflocking-)nut and washer each. Picture 2 shows a testprint... the rod should be covered, too. Print Settings Printer Brand: Anet Printer: A8 Rafts: Doesn't Matter Supports: Yes…
Mount for 0.45L capacity flask in original Glasflügel Kestrel instrument panel. Print Settings Printer Brand: Anet Printer: A8 Rafts: Doesn't Matter Supports: No Resolution: 0.2 Infill: 10% Filament: Unknown Filament PLA Glow in the dark…
Clamp to mount a Samsung Galaxy S8 with clear silicone cover on an tripod. Thread needs to be cutted in the hole. I use it in connection with this Tripod: https://www.thingiverse.com/thing:1460181 as a perfect combination for travelling…
3 M4*20 countersunkheadscrews and 6mm rubberband are required. Have a look @ the pictures.... tells all. Category: DIY
These are all currently available results.
