Counting matching models…
I liked the original design by dade75 ( https://www.thingiverse.com/thing:3747148 ) but the Ender 3 Pro comes with a different PSU and I found out the hard way that it did not fit. I designed this mount based on his original design with…
Simple adapter to use 1-1/4" vaccuum accessories on a 1-7/8" hose.
### Original publication 2021-04-14 Remixed one of the mount (XB1_NoScrews_Deep_fixed) to fit on a Ikea Skadis board. I used the hooks templates from here : https://www.thingiverse.com/thing:3734897 Tested controllers for the Xbox One…
Warning : I noticed that Ecobee changed the design of their smart sensor. I only could look at pictures of the new sensor and the back looks much more spherical, it probably won't be compatible with this wall mount. I used the original…
Copy of an existing wall hook that we have in our bathroom but couldn't find anywhere in store. I used a small #4 wood screw with a round head to attach the hook to the wall mount. I believe a M3 screw would work as well.
Rotate the part so that the round pegs on each side touch the print bed (see screenshot). This way no supports are required. I included picture of the keyboard for reference. If printed correctly, you should really feel and hear it “snap”…
I have a Craftsman garage door opener from about 2006. To change the battery you have to open the remote case, which is held by tiny flimsy plastic pins… which broke over time. That means both half won't stay together and the battery…
This is a remix of "Rift_S_Wall_Mount_Sensor_Clear" from https://www.thingiverse.com/thing:3678066 Supports will be required for the hooks in the back. I tested this with the original Rift (CV1), but just like the original it should fit…
This is my first big project involving more than 2 simple parts, with some electronics added as well. From design, prototyping to final product, it took me nearly one month. A lot of mistakes were made, a lot of filament wasted, but it's…
There's a version for use with peg boards. That one require supports for the pins on the back. (I probably exagerated quite a bit on the number of pins in the back. I wanted to be really sure it wouldn't break after a while since I…
I lost one of the original parts, it was simple enough to reproduce. I ended up scaling it to 103% for an easier fit.
This is a remix from https://www.thingiverse.com/thing:3106000 to fit on a IKEA Skadis board. To use this you will also need to print 1 Universal hook from https://www.thingiverse.com/thing:2853261 (I included the STL file for that hook…
You will need to print the roller from this thing twice : https://www.thingiverse.com/thing:3209211/files I liked the design of the spool holder created by koobj but I didn't have the correct screws to make it work and it was hard to fit…
Not quite sure how to describe it, but this alternative triangle base + attach part lets you "offset" the triangles (see pictures). You'll need 2 "attach" parts to connect 2 triangles together. Unfortunately it also requires more screws.…
This is a remix from https://www.thingiverse.com/thing:2428705 I had already printed the original for a 1-¼" hose out of PLA but it broke after a few uses. I also replaced my old ShopVac with a Dewalt model that use a 1-1/8" hose, so I…
WARNING : If you use this you won't be able to make the chair lean all the way back because the arm rest will collide with the two handles under the chair. It's fine if you remove the plastic part of the handle. (I'll try to design a…
I printed it out of PETG, it has been installed outside all winter (in Québec) and is still in perfect condition. It probably fit other EVSE models from Kia and Hyundai. Mounted to the wall with #8 screws.
I ordered a left handed / mirror version of the BMG Extruder by mistake. Had to make a ~8.34 mm offset to the right of the top part so that the extruder would be aligned with the hot end. Original description : Direct Drive Adapter for…
These are custom parts I made for the ITX case made by oximoron_fr. Front panel The hole for the power button have a diameter of 16mm and has been designed for this power button by averypierce . The holes for the LEDs are 3.25mm wide.…
After adding some Ikea Besta units on my wall, I needed new mounts for my Oculus Sensor. I wanted something that could be installed on the Ikea Besta units without requiring any kind of glue or screws and which could be easily removed.…
My daughters received Hatchibabies toys for Christmas. They kept the lower half of the egg as a bed or chair but it wasn't stable since the base is rounded (it's an egg, kinda expected!), so I designed this small base to keep the eggs…
These are all currently available results.
