Counting matching models…
Modified version of Bobbin clip from Tiggr . I adjusted it to 8mm wide to fit my bobbins, and thought, what if it had a handle? So it has a handle. Enjoy. It should fit Singer, Veritas and other European styles of bobbin. You can…
Replacement Shift keycap for cloned Model M ("Sunnytech KB-5191")
The computer is mounted upside down to take advantage of the rubber feet. If you want it in a normal orientation, put some adhesive rubber feet or a piece of rubber on the top side. You can also edit the freecad file and adjust the…
DIY weather station I designed for my balcony. Full info in the article here: https://www.ondrovo.com/a/20230204-weather-station/ No wind direction, as it's intended for a balcony. Uses M5 threaded rod and nuts. If you want to build it,…
Designed to precisely fit over the foam feet of the speakers. You can adjust the tilt angle in FreeCAD.
A very convenient add-on for the awg30 wire frequently used for PCB rework and various bodges. Designed to print quickly. Mine is in recycled PETG. I heated the end tap with the hole with a heat gun and bent a little, so it's slightly…
I found that the Ikea UPPDATERA utensil trays are excellent for keeping (not only) electronics projects organized. They're ideal for breadboard, adapters, parts etc. that go together. One downside of the trays is that they don't stack.…
adjust the dimensions as needed in the attached FreeCAD model
The ring is composed of 4 segments that fit together. The screw hole is designed for hot-tapping - heat the screw with a lighter and still hot screw it in, then wait a few seconds so the plastic sets.
Listerine mouthwash always drips from the bottle and makes a mess on the shelf. You could be careful to wash the cap after use, OR print a work-around! This clamp-on device is designed to collect the drops that'd make a sticky mess on the…
This is an adapter for permanent or temporary mounting of the Topeak Redlite Mega tail light to Topeak racks. It's anchored by two M5 screws, fits very well (at least on my printer) and even has some theft protection with the optional…
The mounting kit is no longer made, but the computer still works fine. Why throw it out? You need some thin tinned wire to make the contacts. Solder quickly with good no-wash flux so the plastic doesn't have time to melt. It's fine - just…
A hook to attach a reed screen to a balcony railing. It's designed for my particular balcony, but you can easily customize it by editing the Sketch layer in the FreeCAD file. Uses an M3 screw or a friction fit. The railing ends with a…
It's designed for a hex nut with 8mm between the flat sides, with a 6mm diameter hole for the screw. You can adjust the fit in the FreeCAD file. The FreeCAD file also shows an interesting use of a “intersection pocket” to set the shape…
These are all currently available results.
